Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
Question:
I was going to replace the whole brake assembly Dexter K23-458 and 459. This is the first brake replacement on my trailer. Do I need to machine or replace the drum or can I use if the surfaces are flat?
asked by: Keith
Helpful Expert Reply:
If the surface on the inside of the drum where the shoe pads make contact isn't smooth then a brake shop may be able to turn the drums. If that surface or the surface where the magnet makes contact (called the armature surface) is discolored then the drum will need to be replaced.
In most cases, unless there is damage or discoloration, the drums will not have to be serviced or replaced. If you are unsure then the safest thing to do is take the drums to a brake shop to have them inspected.
Continue Researching
- Shop: Trailer Hitch
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Troubleshooting Trailer Brakes that are Always Engaged
- Shop: Fifth Wheel Hitch
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Custom Fit Industry Standard Rail Kit for a 2022 Ford F-150 w/ 6-1/2 Foot Bed
- Shop: Easy Grease Trailer Hub and Drum for 5.2K to 7K Axles - 12" - 8 on 6-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Shop: Trailer Wiring
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Shop: Curt Custom Fifth Wheel Installation Kit for Ford - Gloss Finish
- Q&A: Is Brake Magnet Supposed to Continuously Ride on Armature Surface of Brake Drum
- Q&A: Electric Trailer Brakes More Aggressive After Changing Vehicles and Repacking Bearings
- Search Results: akhd~865~7~g~ez~k
- Video: Trailer Hitch Installation - 2013 Infiniti JX35 - Draw-Tite
- Video: Trailer Hitch Installation - 2013 Infiniti JX35 - Curt
- Video: etrailer Class III Trailer Hitch Installation - 2018 Infiniti QX60
- Search Results: 76031
- Shop: Gooseneck Hitch
- Search Results: 5th wheel hitch
- Video: B and W Gooseneck Hitch Safety Chain Kit Installation - 2021 Ford F-450 Super Duty
- Video: Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches Review
- Q&A: Recommended Gooseneck Hitch Ball Kit for 2020 Ford F-350 with Factory Puck System
- Search Results: b&w companion 5th wheel
- Q&A: Axletek-12-GG Replacement Brake Assembly and Hub Recommendation
- Q&A: Do Trailer Drums have to be Machined or Turned when Replacing Brake Assemblies
- Video: Curt Fifth Wheel - Fixed Fifth Wheel - C16120 Review
- Search Results: akebrk~7l~sa