Braking Assembly Recommendations For A 2017 Grand Design Momentum 395M
Question:
I am looking to replace the hubs and brakes on my 2017 grand design 395m. I would like a pre greased hub and ready to go breaks. Can you help me pick what would work best for me?
asked by: Luke P
Expert Reply:
Sure thing!
For your 2017 Grand Design Momentum 395M, I recommend taking a look at the:
- Electric Trailer Brake Kit # AKEBRK-6.
This kit includes both the left and the right hand side assemblies, will fit most standard hu and drum assemblies, and will work with axles rated 5,200 lbs, 6,000 lbs, and 7,000 lbs.
Or
Even easier, you could also use the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-458 for the left side, and # 23-459 for the right side.
This braking assembly will work with 6K axles that have a 5 bolt mounting pattern, will not require manual adjustments unlike regular brake assemblies, and will work with 6K axles.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 6000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum for 5.2K to 7K Axles - 12" - 8 on 6-1/2 - Galvanized
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Q&A: Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Video: Review of Lippert Trailer Hubs and Drums - Hub with Integrated Drum - LC53UD
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 1/2" Studs - 8 on 6-1/2 - 7K
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 9/16" Studs - 8 on 6-1/2 - 7K
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Video: Review of Dexter Lubricants Sealants Adhesives - Multi Purpose Lithium Grease 14 OZ - DX64TR
- Q&A: How To Determine The Correct Replacement Hub and Drum Assemblies For Trailer With 8 Lug Bolt Pattern
- Q&A: Is Brake Magnet Supposed to Continuously Ride on Armature Surface of Brake Drum
- Q&A: What Is The Difference Between The etrailer Electric Brake Kit And The Hayes/AL-KO K23-537-00?
- Q&A: Comparing etrailer and Dexter Axle 12" Electric Brake Kits
- Q&A: Will Out of Adjustment Trailer Brakes Cause a Fault Code on the Electric Trailer Brake Controller
- Shop: RV Roof Membrane
- Q&A: Replacement Brakes and Hubs For Axle-Tek 12-GG Axle
- Video: Review of Hydrastar Trailer Brakes - Triple Axle Trailer Disc Brake Kit - HYD54FR
- Shop: Suspension Enhancement
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: trailer leaf spring suspension
- Search Results: akebrk~7r~sa
- Shop: Performance Chip Tuners
- Shop: RV Exterior Lighting
- Search Results: tires
- Search Results: bike rack
- Search Results: suspension
- Video: etrailer Trailer Brakes AKEBRK-7R-SA Review