Trailer Hitch Installation - 2013 Infiniti JX35 - Curt Video

If you were to get bearing grease on the brake pads then they are pretty much done and would have to be replaced because you will never be able to get all of the grease off of them. It doesn't sound like grease is the problem though because the…

The brake magnet can indeed be in direct contact with the armature surface of the brake drum, regardless of whether or not the magnet is energized. This doesn't present a problem unless the drum is worn and has grooves in the armature surface.…

If the surface on the inside of the drum where the shoe pads make contact isn't smooth then a brake shop may be able to turn the drums. If that surface or the surface where the magnet makes contact (called the armature surface) is discolored then…

A brake magnet such as the one on the Hayes/AL-KO #185100 that you referenced or the brake magnet depicted in your photo does not visually look “worn out” and they do not have hole type wear indicators. If the inner coil of the magnet is exposed then…

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

I can help set your mind at ease about the Curt Ball #C60601. To help you understand why the ball is able to spin I want to tell you what's going on inside the hitch. The way the ball sits in and secures to the underbed system without a pin is by…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…