Replacement Leg Kit for etrailer RV Dinette Tables - Recessed Mount
(6 reviews)
Price: $53.11
In Stock
Replacement Leg Kit for etrailer RV Dinette Tables - Recessed Mount
Item # e69RR
Our Price: $53.11
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (6)
- Q & A (0)
- Videos (1)
- Photos
etrailer Accessories and Parts - e69RR
- RV Dinette Table
- Table Legs
- etrailer
Replaces the leg kit for your etrailer RV dinette tables. Leg recesses into the floor of your RV with the included mounting brackets and hardware. Includes 1 leg.
Features:
- Replaces the table leg for your etrailer RV dinette table
- Works with all etrailer RV dinette tabletops (sold separately)
- Recesses into the floor of your RV for a clean, flush look
- Includes 1 leg, 2 mounting brackets, and hardware
Specs:
- Table leg length: 26-1/2"
- Base bracket diameter: 6-5/16"
- Diameter of floor cutout: 2-1/2
Fits:
- All etrailer RV dinette tables and tabletops
RVTABLE31 Replacement Table Leg Kit for etrailer RV and Camper Dinette Tables - Recessed Mount
California residents: click here
Video of Replacement Leg Kit for etrailer RV Dinette Tables - Recessed Mount
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Replacement Recessed Mount RV Dinette Table Leg Kit - e69RR
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Replacement Table Leg Kit for your etrailer RV Recessed Mount Dinette Tables. This will replace the table leg and mounting brackets for your etrailer RV dinette table. And this will fit all etrailer RV dinette tabletops. And those are sold separately, but you can obviously find them here at etrailer.com. So this kit is going to include not only the table leg, but also the two brackets and mounting hardware needed to secure the leg to the tabletop into the floor.
Our recessed floor bracket here will allow you to mount the leg into the floor for a clean flush look when you have the table removed. So you're not gonna have to worry about tripping over it and that sort of thing. This will require a two and a half inch diameter cutout, so that you can get this mounted in place. Because this is going to stick into your floor a little bit, you are going to lose a little of your overall length. And so, our table leg here is right about inches tall.
But once you get this slid in place, you are gonna lose about two inches. And then we are gonna gain a little bit back here with that top bracket that's gonna be mounted onto your table. So our clearance from our floor to our bottom of our table is gonna be about 26 and three quarters of an inch. So it's not gonna lose a whole lot for you, but just something to know. This is going to fit all etrailer RV dinette tables and tabletops.
But it is going to have that recessed mount. So if you are looking for a direct replacement for your recess mount, this is gonna be exactly what you need. If you have a surface mount, we have a separate set available that has two of these brackets that will give you that surface mount installation. So, make sure you're getting the one that you need. That completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement Leg Kit for etrailer RV Dinette Tables - Recessed Mount - e69RR
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Replaces the leg kit for your etrailer RV dinette tables. Leg recesses into the floor of your RV with the included mounting brackets and hardware. Includes 1 leg.by: Ronald 02/04/2024
This mount massively supersedes the standard table mounts. The table is very stable now. The installation was very simple and straight forward.
by: Michael 03/21/2024
Replaced the old plastic broken parts.
by: Michelle D Buchanan03/18/2023
The item arrived fast and in great condition! This table mount lit will work perfect for my vintage camper. Replacing dinette table with a coffee/cocktail table. The black is the perfect color!
by: Matt 02/22/2024
by: Wayne 04/05/2024
by: Jack 09/30/2023
6
6
See what our Experts say about this etrailer Accessories and Parts
- Explanation Of Height Differences For etrailer Recessed and Surface Mount Table Leg KitsBoth the Recessed # e69RR and Surface Mount # e79RR table leg kits are going to use the same 27" long table leg. The 26-1/2" and 28-1/2" measurements you see on our site are the heights from floor to base of table. So with a 1" thick table you will get either 27-1/2" if you use the recessed kit or 29-1/2" with the surface mount kit.
view full answer... - Can the Replacement Leg Kit for RV Dinette Tables Be ShortenedYes absolutely, you can cut the pipe to whatever length you want. You're just going to want to make sure that the end caps get put back together properly so you can install the leg to the mount. If you only need to trim it a little bit you could just use the Replacement Leg Kit for etrailer RV Dinette Tables # e69RR which is going to be 2 inches shorter than # e79RR.
view full answer... - Can The etrailer Replacement RV Dinette Tables Be Used On Dinette That Turns Into A Bed The ability to use the etrailer Replacement RV Dinette Tabletop # e97RR is really going to rely on the supports that you use and the amount of weight placed on it. If your legs are collapsible and don't support the table top when in the sleeping position you could run into issues depending on how much of the table top is being held up by the seating area. Each setup is a bit different so it's a bit of a case by case scenario. If you wanted to take any guessing out of it you could just...
view full answer... - What Is the Replacement Table Leg Kit for etrailer RV Dinette Tables Made OfThe Replacement Table Leg Kit for etrailer RV Dinette Tables part # e69RR is made of steel and has a black painted finish. It's designed for use indoors but the painted finish would provide protection from the elements if used outdoors. That's about as much as I can say for alternative applications.
view full answer... - How Many Legs Should I Use With My 27" x 37" RV Table?You could probably get away with using just one leg, but If you're wanting maximum sturdiness I'd definitely suggest going with at least two Replacement Leg Kit for etrailer RV Dinette Tables # e79RR or # e69RR. The # e69RR are recessed mounted, and the # e79RR are surface mounted, so if you're dropping these legs into a pre-existing mounting hole the recessed option will be the one you want, if not I'd go with the surface mounted option. As far as sturdiness goes, these legs do get...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Leah S
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Carrie H
Edited by:
Amanda M
Written by:
Kristina F
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.