Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This pair of heavy duty shocks increases the weight capacity of your 78" Rack and Roll trailer by 100-lbs, from 250-lbs to a maximum load of 350-lbs. Shocks have 4" of vertical movement to cushion and protect your gear.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Heavy Duty Shocks for the Yakima Rack and Roll Trailer. It is for a quantity of two shocks. Now, this pair of heavy duty shocks will upgrade the factory shocks on your 78 inch Rack and Roll Trailer, which we sell separately on our website. That trailer part number is Y08107.
Basically, these shocks will increase the weight capacity by a hundred pounds. The factory shocks have a 250 pound capacity. These will raise it to a maximum load capacity of 350 pounds. And it is required, these should be used if you're hauling more than 200 pounds on the trailer. Now, these will also work on the smaller 66 inch Rack and Roll Trailer, which is part number Y08106.
But you do need to add the 78 inch Cross Member Kit, which is part number Y08111. Now, this will give you four inches of vertical movement to cushion and protect your cargo. And as we mentioned, it is for a quantity of two shocks. Application, again, it's for the 78 inch Rock and Roll Trailer. And the trailer capacity after adding these is 350 pounds.
And the last thing to give you is the measurement from the center eye. The center eye is gonna be 12 and seven eights inches. But that should do it for the review on the Heavy Duty Shocks for the Yakima Rock and Roll Trailer.
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
This pair of heavy duty shocks increases the weight capacity of your 78" Rack and Roll trailer by 100-lbs, from 250-lbs to a maximum load of 350-lbs. Shocks have 4" of vertical movement to cushion and protect your gear.We upgraded to the heavy duty shocks when we bought our Rack and Roll 78 ten years ago. What we failed to do was proactively replace them along the way. When one broke on a recent trip it dropped the load onto the tire and chaos ensued. We replaced them with a new set from etrailer and notice a bit of a design change. Installation was a breeze. Many thanks to etrailer for having the parts and their fast service.
Shocks held up well given 7000 mile road trip to Alaska but did incur damage due to their exposure to road debris and rock chips. Trailer scaled at 400#’s.
In addition to my wildy a.t.a.k. kayak, along side it, I mounted a large rectangular rod box (it’s a Yakima, I don’t recall the exact model name but they only build one thing in this class). That gets loaded with 4-8 rods, some med and small boxes, kayak anchor, etc so I was worried about the factory standard jobs being up to snuff, particularly if I had to drag the trailer thru some interesting terrain. The HD shocks have held up well with zero problems to date. Very pleased
Easy order, fair price, quick delivery. Slight damage to exterior carton, but not a mark on the shocks. Very pleased.
Arrived well-packed and quickly once available. They were super easy to install, and have enhanced our trailer's load capacity and ride. Highly recommend. NOTE: There were supply issues for these and other Yakima parts that were out of eTrailer's control, resulting in a very long wait time, but their staff were very responsive and attentive to the problem, following up multiple times with periodic updates on their expected arrival - thanks!!
Installing the heavy duty shocks onto the Yakima Rack and Roll trailer was so fast and simple. The included instructions tell you to remove the wheels but that is totally unnecessary. After removing the bottom shock pin just use a piece of wood or a cardboard box to hold the wheel and it’s axel up and out of the way to allow you to get an open box end wrench on the head of the top mounting pin of the shock. It is located in the fender well. Using this approach, both new shocks can be mounted in about 20 minutes total. Tip, do one side at a time so you can always look at the other side for reference if needed.
Shipment and delivery was fast and per their estimate.
Super fast shipping! The heavy duty yakima shocks are worth the investment. I used them to carry 2 18ft kayaks and 4 bikes fork down with tire carriers. The kayaks had all the gear stowed inside, like the rescue equipment, life jackets, paddles etc and some bike equipment like helmet, shoes, tools. The extra weight was worth the shock investment, no kicks from the trailer just smooth ride over bumps. Also, the trailer is worth the investment since it significantly reduces drag and increases gas mileage.
Shocks were exactly as ordered and shopping was very prompt! Customer service is excellent! I had to return 1 box of shocks only because of my mistake in not realizing there were 2 in a box, but etrailer was very gracious in processing the return. I would totally buy from them again!
I got Lots of boxes with items well packed . Assembly - take your time - manual is good and answers each step well. Parts are high quality and finished build is very satisfying. After I use it for a while I can say more.
I talked to several long term owners and both said No problems and satisfied.
I have not installed yet but the customer service at etrialer is always excellent! Only had one small issue and it was handled very quickly and professionally. I will use them when ever I can. Thank you!
Great staff, right product. Yakima had good instructions
Just the extra support your trailer needs to carry that extra load. Easy to install.
Fantastic
Always great service always keep you informed when something is not in stock. Great company have purchased many thanks from them and always well in the future.
Nice heavy duty upgrade. Working well.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gregg S.
1/24/2024
Installation was straightforward, no problem removing the old shocks. Seem to ride about the same with two 14 kayaks. Rarely carry any load approaching 300-350 lbs, but nice to know I could. First standard shocks lasted over 10 seasons, these should outlast me.