Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards
(28 reviews)
Price: $348.95
In Stock
Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards
Retail:$444.09
Our Price: $348.95
You Save: $95.14
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meCustomers prefer these similar products
14% prefer this
12% prefer this
- All Info
- Reviews (28)
- Q & A (0)
- Photos
Yakima Watersport Carriers
- Paddle Board
- Roof Mount Carrier
- Aero Bars
- Elliptical Bars
- Factory Bars
- Round Bars
- Square Bars
- Saddle-Style
- Yakima
- Clamp On
- No Load Assist
- Rear Loading
This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.
Features:
- Roof-mounted carrier holds up to 2 stand-up paddleboards (SUPs) fin side up on your roof rack crossbars
- Integrated stainless steel straps secure your boards to the carrier
- Straps adjust along built-in tracks to accommodate boards up to 36" wide
- Slots on bottom of carrier contain strap ends to eliminate flapping
- Pads on straps protect board rails and provide extra grip
- Integrated rollers let you easily load an oversized board
- Tie-down straps and stainless steel hook secure tail of board to your vehicle
- Secure bottom board if 2 boards are mounted
- UV-resistant, synthetic rubber strips on arms protect your board from scratches
- Simple, clamp-on installation on most crossbars - no tools required
- Adapters included to keep carrier from sliding on round bars
- Same Key System (SKS) locks secure boards to the carrier and the carrier to your vehicle
- Lightweight extruded aluminum with glossy black powder coat finish resists corrosion
Specs:
- Application: round, square, aero, elliptical, and most factory crossbars
- Maximum crossbar dimensions: 3-1/2" x 1-11/16"
- Minimum crossbar spread: 24"
- Carrying capacity: 2 boards
- Weight capacity: 66 lbs
- Maximum stand-up paddleboard width: 36"
- Integrated strap length: 62-1/2"
- Carrier width: 40-1/8"
- Tie-down length: 11' 10"
- Limited lifetime warranty
The SUPDawg lets you carry 1 or 2 SUPs fin side up on your vehicle's roof rack. This padded aluminum carrier includes integrated, adjustable straps, rollers for easy board loading, and a tail tie-down to secure your boards. The SUPDawg mounts to most crossbars without tools, and it includes locks to secure your boards to the carrier and the carrier to your vehicle.
Built-In Straps and Tie-Down Anchor
The carrier has integrated straps that adjust along built-in tracks to snugly secure your boards. The straps can be tightened or loosened by pressing the red buttons on the end of each arm.
Elastomer pads on the straps help grip your boards, and they protect your board rails against strap abrasions. The polypropylene straps and UV-resistant pads will last through many years. And built-in slots in the carrier contain excess strap length to prevent flapping as you drive.
The included tie-down strap acts as an anchor - securing your SUP to your vehicle. The strap connects to a tie-down point on the tail of your board and hooks onto your bumper. If you are carrying 2 boards, secure the strap to the bottom board. A cam buckle lets you adjust the tension, so you can secure your board without damaging it. A flexible elastomer sleeve along the tie-down strap also protects your bumper from abrasions.
Easy Loading with Integrated Rollers
Rollers are built into the ends of the carrier to help load large, heavy boards. Just set your board on the edge of the carrier, and push the board onto your roof.
Simple, Clamp-On Installation
The SUPDawg's mounting clamps fit most crossbar configurations without the adapters. To install, simply place the carrier on your crossbars and turn the integrated handles until the mounting clamps are tightly secured. If you have round crossbars, the included adapters will provide a secure fit, preventing the cradles from twisting or sliding on the bars.
Added Security
Locks on the ends of the carrier secure your board to the carrier and the carrier to your roof rack. After your board is loaded and the straps are pulled through to the back of the carrier, use the locks to secure it in place. Yakima's SKS cores can be swapped out to make all your Yakima locks keyed alike.
8004075 Yakima Sup Dog Roof-Mounted Stand Up Paddle Board Carrier
Item # Y04075
Installation Details
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Did not arrive in time
Customer Reviews
Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards - Y04075
Average Customer Rating: 4.9 out of 5 stars (28 Customer Reviews)
This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.by: Eric03/24/2023
I use these 2-3 time weekly for my SUP I fish off my SUP and this rack is a great investment for quickness and ease of strapping. Thing I like best about etrailer is how fast I get my stuff.
by: Omar06/04/2019
After doing some research decided to go with the Yakima roof rack setup for our VW Atlas. Love the look and functionality of it all. Got the SUPDawg paddle board carrier to go with it. Love the locking capability for piece of mind when leaving boards unattended. We are VERY happy with our choice. Drove on highway with two paddle boards and it all went smoothly with zero wind noise whatsoever. Definitely worth every penny. Will recommend.
by: Ed C07/17/2016
Received the the Thule accessories and Yakima Supdog from etrailer.com. It was all nicely packed into one box. As the box said, "the bottom of this box should not be the end of the relationship"
I can tell you it won't be! The items were shipped quickly, and they followed up with an email to make sure all was received well. Love the customer service! Also, the Yakima Supdog product is great. Took no time at all to get it on my truck and load up the 2 paddleboards.
It was exactly what I was looking to get!
Thanks!
by: Timothy05/25/2016
The SUPDwag is easy to install and use. Made for Stand Up Paddle boards, but it can work with Surfboards. Wish it was a little bit narrower, hopefully Yakima will make smaller one for the surfing market.
I turned my unit around to the driver's side for loading, also protects rain from getting in the lock when driving.
by: Tauna03/15/2020
Great Product, mounts very well and sturdy to my stock VW carrier bars. Easy to install and easy to use. I would give this 5 stars if the length of the straps had been in the description. If the straps were 75" instead of 65" this would allow for more carry options. If you have 2 sups over 6" thick and 33" wide, I would search for another option. Many hybrid SUPs like ours are over 6" thick and very wide and unfortunately this carrier cannot accommodate 2 of our hybrids due to strap length.
by: Dawn G.09/05/2016
Put these on a Subaru Forrester. Very easy. Love the excess cord storage. Snugged down my paddleboard so well I didn't need the front tie down.
by: John A10/07/2018
When purchased I was concerned that the clamp down to my cross bars wouldn't work. Upon delivery I installed the SUBDawg immediately with no problems what so ever, the universal type clamp worked well. My wife and I put both paddle boards on after the install and went for a ride up to 70 mph, we felt no movement. The engineering of the tie down is awesome. I highly recommend buying the Yakima SUBDawg.
by: Tara08/04/2022
Fantastic service! Speedy delivery and The sales team follows up with you to make sure you have all the information you need to use what you ordered. Fantastic company. Would highly recommend and I will use them again in the future
by: Andrew 12/05/2021
Competitive price. Works as expected for a year now, no problems and very easy to use. I was surprised etrailer had these in stock while everyone else was out or drastically up charging.
by: Matt J.04/06/2019
Great product. It works very well with two paddle boards. We can’t wait to use it as much as possible this summer up at Lake Tahoe.
by: Steven 01/06/2021
Great product! Customer service is A+ I will definitely buying from etrailer again. Thank you
by: Scott 11/28/2021
I love etrailer they also have great people help you out when you have questions.
by: Mark 05/18/2021
Mark
5/19/2022
Still works great after a year, easy to load and durable.
by: Robert05/30/2016
Fast shipping. Good price. Nice product. Easy fit and install
by: Al08/11/2021
holds board firmly in place.
by: Mikeh07/24/2022
Delivered as promised.
by: Sheryl 04/29/2020
Great product. Easy to install.
by: JZ10/30/2015
Great communication!
by: Tc10/05/2022
by: Mike 09/10/2022
by: Thomas 10/31/2022
by: John 05/02/2021
by: David 12/21/2020
by: Russell 04/08/2021
by: Mauricio 07/22/2022
25
28
Show More Reviews
See what our Experts say about this Yakima Watersport Carriers
- Recommended SUP Carrier for a 12' Board Unfortunately, the Thule Stacker Kayak Roof Rack w/ Tie-Downs - Post Style - Folding - Clamp On # TH830 you're looking at can only handle up to a 10' long SUP, so for your longer boards I'd recommend going with the Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs # Y04075. This carrier is going to have length and width capabilities for you to carry your longer boards, will work with round, square, aero, elliptical, and most factory crossbars, and has a maximum weight capacity of 66-lbs.
view full answer... - Is Express Surf Strap Designed to Carry Two PaddleboardsI spoke with my contact at Thule and she said that even though the Express Surf Strap would be long enough to secure two paddleboards stacked one on top of the other, it is not recommended because one board potentially could slide out from on top or beneath the other. We do have several carriers specifically designed to carry two paddleboards stacked. Check out the Yakima SUPDawg, # Y04075. This SUP carrier lets you transport up to 2 stand-up paddleboards on your vehicle's roof. I have...
view full answer... - How to Carry a Kayak and SUP on the Roof of a 2017 Toyota TacomaIf you have the full factory roof rack on your 2017 Toyota Tacoma with both side rails and crossbars then we wouldn't have anything to work in conjunction with this. However, if you just have the factory raised side rails then you can add crossbars using both part # Y00422 and part # Y33TR. You can also add locks using part # Y07204. The crossbars are 60" long and are of an aero shape which will provide less wind resistance/drag. As far as whether or not you will be able to carry both...
view full answer... - Antenna Clearance When Transporting Stand-Up Paddleboards on 2013 Ford Escape or 2013 Toyota RAV4When it comes to a stand-up paddle board carrier that will clear the antenna on a 2013 Ford Escape or a 2013 Toyota RAV4, I recommend taking a look at the Thule SUPDawg, part # Y04075. We installed this carrier on a Toyota 4Runner and as you can see in the attached picture, there is quite a bit of room between the roof and the paddle board so you shouldn't have any problem with antenna clearance.
view full answer...
- Can Paddle Boards Be In Storage Bags When Using Stand-Up Paddleboard CarrierYou should not have any problem at all using storage bags on your paddleboards in the Yakima SUPDawg Stand-Up Paddleboard Carrier, part # Y04075 while traveling. You will want to make sure the bag opening is facing the rear of the vehicle and that the bags do not interfere with being able to secure the paddle boards so that they do not move. I have attached an installation video of this carrier you can check out.
view full answer... - Should Kayak Carrier be Used to Carry SUP PaddleboardsKayak carriers really aren't ideal for carrying paddleboards since they are designed for securing something taller or "thicker" I am sure there's a way you could secure one to a Jaylow part # Y04073 but that's not something we'd be able to give you definite instructions on and you'd be doing so at your own risk so we'd not recommend it. Your best options would be a carrier designed for paddleboards like the Yakima SUPDawg Carrier part # Y04075 which can carry both of your SUPs on the one...
view full answer... - Roof Rack and Paddleboard Carrier Recommendations for a 2010 Subaru LegacyThe Semi-Custom roof rack # SR1010 is listed for your 2010 Subaru Legacy. Since it is semi-custom it won't be the best fit like a true custom fit rack would be. If you are interested in a true custom fit rack I recommend an Inno rack using the following parts: bars # INB137, foot pack # INSUT, and fit kit # INK851. With either roof rack installed you can then add a paddleboard carrier. The Yakima SUPDawg # Y04075 is a popular option. It can hold up to 2 paddleboards that are up to 36 inches...
view full answer... - Can the Mounting Feet On the Yakima SUPDawg Stand-Up Paddleboard Carrier Be AdjustedThe mounting feet on the Yakima SUPDawg Stand-Up Paddleboard Carrier part # Y04075 are fixed meaning they cannot be adjusted back and forth across the width of the carrier. The distance between them though left to right would work on even the shortest of crossbars.
view full answer... - Paddleboard Carrier Compatible With Factory Roof Rack on 2020 Toyota Corolla HatchbackThank you for that info, and based on my research you have the factory roof rack on your 2020 Toyota Corolla hatchback; while we do have an option for a paddleboard carrier that is compatible with your rack, the Yakima ShowDown # Y04081 is not because your rack does clamp to door jambs and its crossbars do not extend out past the feet, which is another requirement. Instead, I did verify with Yakima that there is a paddleboard carrier you can use which will fit your Corolla's crossbars,...
view full answer... - What Is Crossbar Distance Needed For Roof Rack Paddleboard CarriersThere is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches. This is the minimum distance needed for part # TH811XT and # Y04075. Both carriers have weight capacities and crossbar dimensions, so you want to make sure you select the right carrier that will work for you. If you want to let me know what roof rack system you are using I will be glad to make recommendations that will work.
view full answer... - Paddleboard Carrier and Roof Rack Recommendation for 2017 Mazda CX-5The Yakima Paddleboard Carrier SUPDawg part # Y04075 that you referenced will be a great option, but let's get you set up with a roof rack on your 2017 Mazda CX-5 first. For that the Yakima aero bar roof rack that consists of part numbers # Y00425, # Y28TR, # Y06130, and # Y06154 is a confirmed fit and would work well. The bars of this give the least amount of wind resistance which means minimal wind noise.
view full answer... - Will Yakima SUPDawg Paddleboard Carrier Fit on a 2017 Subaru CrosstrekIf you have the factory roof rack on your 2017 Subaru Crosstrek the SUPDawg paddleboard carrier, part # Y04075, is confirmed to fit. If you don't have the factory crossbars on your Subaru you can add a complete roof rack and still use the SUPDawg. I recommend the Yakima RailBar, part # Y00448-0449. It's a great looking, factory-like roof rack. Check out the video I linked of it on a 2014 Crosstrek. The SUPDawg includes Yakima SKS lock cores already. The RailBar doesn't include locsk...
view full answer... - Paddleboard And Kayak Carrier Recommendations For 2010 Ford EscapeThe biggest concern with using both a paddleboard carrier and a kayak carrier on the roof of your 2010 Escape is the crossbar room that is required for the carriers. The SUPDawg Stand-Up Paddleboard Carrier, part # Y04075, measures 40-1/8 inches wide. Depending on the kayak, you may have a tough time trying to fit both on the crossbars. A carrier like the Yakima HandRoll, part # Y04082-2 has rollers that are placed on the rear crossbar and allow you to load your kayak by placing it...
view full answer... - Yakima or Thule Roof Rack Paddleboard Carrier RecommendationSince you said you want a paddle board carrier that locks the obvious choice in my opinion is the Thule SUP Taxi part # TH810001. This carrier is easy to load and use as well as is compatible with round bars like what you have.
view full answer... - Will the Yakima SUPDawg Paddleboard Carrier Fit the Rola Ladder Rack on a 2015 Toyota TacomaI am happy to report that both parts are compatible with each other! The Rola crossbars on ladder rack # 59799 are 3-1/8 inches by 1 inch so the Yakima SUPDawg carrier # Y04075 will fit. The carrier is compatible with bars up to 3-1/2 by 1-11/16 inches.
view full answer... - Roof Rack and Stand-Up Paddleboard Carrier for a 2012 Mazda 5 with Fixed PointsSince you want to carry a stand-up paddleboard, something that is going to get wet and get the roof rack wet as well, I recommend going with a roof rack that has aluminum crossbars for your Mazda 5. Aluminum is corrosion resistant so the water will not be a factor. Take a look at the Rhino-Rack ROC25 Roof Rack for fixed mounting points # RR77MR. It comes with stylish elliptical aluminum bars and the feet mount to the fixed points on your Mazda 5. This is a good roof rack for a paddleboard...
view full answer... - Availability of Roof Rack for 2005 Scion tC to Carry PaddleboardTo install a paddleboard carrier on your Scion tC, you would first need to install a roof rack that would provide an attachment point between the carrier and the vehicle. A rack can be constructed by combining the following parts from Yakima: Round 48 inch crossbars, part # Y00408 Yakima BaseLine Towers, part # Y28TR BaseClip Fit Kit, part # Y06134 BaseClip Fit Kit, part # Y06136 RoundBar Adapter, part # Y03536 Once the roof rack is in place, the Yakima SUPDawg Stand-Up Paddleboard Carrier,...
view full answer... - Will the Yakima SUPDawg work with the Malone Roof Rack SystemsIf your Lexus RX450h has the raised factory side rails the Malone AirFlow2 Roof Rack part # MPG216 is a great easy to use roof rack. That will fit perfectly. If it does not have the raised factory side rails but has a bare or naked roof instead a kit consisting of the Inno Aero Crossbars part # INXB138-2, Inno Through Feet for Aero Crossbars part # INXS250 and the Custom Fit Kit part # INK868 will do the trick. Both of these will work out great with the Yakima SUPDawg Stand-Up Paddleboard...
view full answer... - Can Yakima SUPdawg be Keyed to Other Yakima CarriersThe Yakima SUPDawg part # Y04075 comes with lock cores but you can swap them out to match what you have now by ordering a set of lock cylinders to match the key number you have. I would need to know that number to pick out the correct cores. This carrier
view full answer... - Recommended SUP Carrier To Go On A TruXedo Elevate Rack System TX24NV'Sup Kevin (see what I did there?). I do have a solution for you, but the Thule SUP Taxi # TH810001 and the Yakima SUPDawg # Y04075 are not going to work with the TruXedo Elevate Rack System # TX24NV. The TruXedo system has crossbars that are 3.79" wide 1.5" tall. The SUP Taxi and SUPDawg will only work with upto crossbars 3.5" wide. So, the TruXedo bars will be a hair too wide. We do have some good SUP carriers that will work on the TruXedo crossbars. One really good option is the Lockrack...
view full answer... - Recommended Stand Up Paddleboard Rack for TracRac Ladder Rack CompatibilityThe Thule SUP Taxi XT Stand-Up Paddleboard Carrier # TH810001 does have straps that when fully extended will fit around the TracRac Crossbars. I can't confirm this to be true for the Yakima SUPDawg # Y04075 on the wide TracRac crossbars because of their size. If you want the cleaner look, I instead recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445 or the Lockrack Watersport Carrier # LR54FR. These options will mount to the channels...
view full answer... - Stand-Up Paddleboard Recommendation for a 2011 Jeep Liberty to Clear Roof AntennaIf your 2011 Jeep Liberty has a trailer hitch with a 2 inch receiver, then you could use the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar, # RTL002, but you will likely have to carry your stand up paddleboard at an angle to clear your antenna. A better option for you would be the Yakima SUPDawg, part # Y04075, and the Thule WingBar Evod Roof Rack, which consists of the 53 Inch Thule WingBars, # TH711420 in black or # TH711400 in silver, along with the Evo Raised Rail Feet,...
view full answer... - What Roof Rack and SUP Carrier Do You Recommend for My 2022 Toyota 4Runner?The first thing you need on your 2022 Toyota 4Runner to transport 2 SUPs is a roof rack system with crossbars. For those components, I recommend the Malone AirFlow2 Crossbars # MPG216. The AirFlow2 comes with all the components you need to attach crossbars to your raised rails. As far as security, the AirFlow2 includes locking mechanisms that deter theft. In addition to the crossbars, you will need SUP carriers to attach. For a great-quality solution that will allow you to transport your...
view full answer... - Recommended SUP Carrier for 2013 Subaru Forester with Factory Roof RackTo transport your SUP on your 2013 Subaru Forester, I recommend looking at the Yakima SUPDawg Stand-Up Paddleboard Carrier # Y04075. This is a great carrier that features heavy-duty straps with stainless steel hooks that will safely and securely hold your board in place. The saddles have synthetic rubber strips on the arms to protect your boards from scratches and the interaged locks will protect your investments. I have attached a demonstration video so you can see all of the specific...
view full answer...
Do you have a question about this Watersport Carrier?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Daron K
Updated by:
Michael B
Updated by:
Manda E
Updated by:
Ashley K
Written by:
Lisa S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dawn G.
9/5/2017
Love it.