Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 10-1/2" x 13-3/4"
(429 reviews)
Price: $15.10
In Stock
Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 10-1/2" x 13-3/4"
Item # UF38-944020
Retail:$46.99
Our Price: $15.10
You Save: 68%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (429)
- Q & A (0)
- Videos (2)
- Photos
Ultra-Fab Products Accessories and Parts - UF38-944020
- Camper Jacks
- Trailer Jack
- Covers
- Ultra-Fab Products
10-1/2" x 13-3/4" Weatherproof cover slips easily over your electric tongue jack and secures with drawstring. Helps to protect jack motor from the elements. Fits most brands and styles of electric A-frame jacks.
Features:
- Weatherproof cover protects your electric jack from dirt, grime, and inclement weather when not in use
- Slips over top of jack to cover motor assembly, switch and/or light
- Drawstring runs through bottom hem for secure closure
- Durable vinyl fabric can be easily stretched over most jacks
Specs:
- Application: most brands and styles of electric A-frame jacks
- Dimensions (when laid flat): 10-1/2" wide x 13-3/4" tall
- 1-Year warranty
38-944020 UltraFab Tongue Jack Cover - 10-1/2" x 13-3/4"
Video of Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 10-1/2" x 13-3/4"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ultra-Fab Protective Cover for Electric A-Frame Jacks Review
Speaker 1: Today, you're gonna be getting a look at the Ultra-Fab protective cover for electric A-frame jacks. It's available in two sizes. For the 14 and a half by 12 inch version, part number UF38-944020. For the 14 and a half by 15 and a half version, it's part number UF38-944026.This weatherproof cover protects your jack's motor from the elements. The drawstring ensures a secure closure. It's gonna fit your Ultra-Fab Odyssey, and most brands and styles of electric A-frame jacks.
The vinyl construction is gonna keep out dirt, grime and moisture. It's an economic way to protect your investment.And that's gonna complete your look at the Ultra-Fab protective covers for electric A-frame jacks.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 10-1/2" x 13-3/4" - UF38-944020
Average Customer Rating: 4.8 out of 5 stars (429 Customer Reviews)
10-1/2" x 13-3/4" Weatherproof cover slips easily over your electric tongue jack and secures with drawstring. Helps to protect jack motor from the elements. Fits most brands and styles of electric A-frame jacks.by: Thomas 04/18/2024
Didn’t put it on yet. Didn’t see the holes provided on the sides to attach the security chains to, not sure I will use them.
by: Donald05/05/2023
Perfect choice to protect our new EJ-3520-WBX trailer jack from the elements.
by: Tony 03/09/2024
Too early to put on our camper jack yet but their products are always good quality
by: Kyle09/28/2023
Not good quality. After 3 months, holes started opening up around the switches of the tongue jack. The cover was very tight over the tongue jack. Could see the switches through the holes. Vinyl started peeling off as well. Bought a canvas cover to replace and have not had any issues with the canvas denier compared to the vinyl which did not hold up well at all.
by: bob b.07/08/2013
Quality material, electric trailer jack will be protected for years to come for a low price.Love the tie rope on the bottom for transporting without taking it on and off for fear of losing I.rated it a 10 out of 10!!!
by: Tony 09/21/2023
Works fine. Completely covers my Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs. Mine came with two gromets installed, allowing me to attach a bungee cord to secure it to the trailer.
by: Ken 03/15/2024
This will be a nice addition to my trai ler.
by: Todd12/30/2020
Product appears to be manufactured with great quality. Too early to tell since we only received cover yesterday (12/29/20). Fits very snug around our Atwood Power Jack. Will follow up with update on status.
Todd U.
12/31/2021
Its been one year and there are no defects with our jack cover. I would highly recommend this product to anyone. like others have stated, ours looks just as good as the day we received it.
by: Bobby 05/13/2024
Good quality fabric and fits perfect on the Stromberg Carlson JET-5000 but the drawstring does not hold tight. I will figure out a way to secure the cover so it doesn't blow off while traveling.
by: Denise10/25/2023
The cover didn’t survive the first use. The outer waterproof portion tore in several spots on the first use.
by: Blake 03/28/2024
it has held up well, no fading or frayi ng.
by: Thorne10/12/2023
I asked what size I needed and etrailer got me the right part for a great price. It is doing the job in the field just perfectly! Thank you!
by: Jerry09/06/2023
Looks nice on a defective trailer jack. I don't need this if the jack is defective and I'm getting the run around.
by: DeNomolos06/04/2022
One year in, sitting outside in CA sun protecting my Stromberg Carlson jack motor. Still soft and pliable, no cracking or weathering noted. Great product! Highly recommend.
by: Art P.05/12/2017
Ordered and received this cover to protect my new EJ-3520 electric jack. As you can see in the picture this cover fits this jack like a glove. Very secure with the pull strap and held closed by the spring loaded clip.
As with my other purchase, great product, good customer service and outstanding shipping and receiving.
by: Terry02/04/2022
The cover seems well built. It has survived two winters and a trip from PA to FL and back. I pull the draw string tight and run it through the hitch pad lock and it stayed in place. I would definitely recommend this to anyone using an electric jack.
Terry
2/6/2023
Still looks like new after two winters and several trips to FL and SC. I just loop the draw string through the ball lock on the coulper and it follows me wherever I go. Totally satisfied.
by: Kathleen 08/05/2023
Covers the new electric jack from e-trailer. Perfect fit! Keeps it safe from rain and snow.
by: Bill C.07/26/2019
Great quality ,fit great. Price was great, I bought an extra one . Should be good for many years. I would recommend this cover. The one I replaced was a much lesser quality that I purchased at a RV dealer. etrailer has quality products.
by: William 10/30/2022
Good quality
William
10/30/2023
Still in great condition
Mike L.
11/14/2023
@William Great to hear that!
by: PDX Camper08/31/2023
Tight fit over Smart Jack.
by: Cort C.02/19/2016
Very good quality. Looks like it will do a great job protecting my power jack. Received order in two days. Nice the way you follow up on orders. Most people take your order and run. I look forward to future purchases.
by: Spencer 07/17/2023
Has held up just fine after a year of outdoor use/storage.
by: Chuck Y.11/02/2016
I live in south Florida and this cover has been in the sun since the day it arrived a year ago. It still looks brand new.
by: Elmer09/18/2022
The supper grip chock wheel stabilizers are a great product. I have purchased two sets, one for myself and one for my in-laws. Quality construction and easy to use.
by: Warren06/06/2023
Perfect fit for the Ram EJ3520. Well made heavy leatherette material. Should add life to the jack by reducing sun damage.
25
429
Show More Reviews
See what our Experts say about this Ultra-Fab Products Accessories and Parts
- Recommended 4K A-Frame Trailer Jack for a 24' Enclosed Show Car TrailerSince you are using the trailer jack for your show car trailer I highly recommend the Bulldog Powered Drive Trailer Jack # BD500199 because it features a spring-loaded pull pin to quickly adjust the lower leg, 4"-6" of overlap between inner and outer tubes for extra support, and has a built-in level. The 5-year warranty and excellent customer reviews gives you peace of mind that you are getting a quality product that will last. Some other added perks to this jack are easy access to the...
view full answer... - Recommended Electric Tongue Jack for 2006 Gulfstream Cavalier Travel TrailerA 3500 lbs electric tongue jack would be a good fit for your 6200 lbs 2006 Gulfstream Cavalier travel trailer. Based on your trailer weighing 7000 pounds loaded you will have an approximate tongue weight of 700 pounds. I would recommend the Stromberg Carlson # JET-3555 (white) or # JET-3755 (black) as they are rated at 3,500 lbs. I have also included an FAQ for you too. One item I highly recommend is the Ultra-Fab Protective Cover # UF38-944020. With the electric jack being out in the...
view full answer... - Replacement Cover For A Stromberg Carlson Electric Trailer Jack To replace the lost cover for your Stromberg Carlson Electric Trailer Jack # JET-5000 you can use the Ultra-Fab Protective Cover for Electric A-Frame Jacks # UF38-944020.
view full answer... - Recommended Cover for Bulldog Powered Drive Trailer Jack # BD500199For a cover to use on the Bulldog Powered Drive Trailer Jack # BD500199 referenced in your question, I recommend the Ultra-Fab Protective Cover for Electric A-Frame Jacks # UF38-944020. This will easily slip over the jack and can be secured using the drawstring. This cover measures 12 inches x 14-1/2 inches. I have attached a video demonstration of the cover for you to check out.
view full answer... - Replacement Manual Override Cap For A Stromberg Carlson Electric Trailer Jack To replace your lost manual override cap on your Stromberg Carlson Electric Trailer Jack # JET-5000 you can use the Replacement Manual Override Cover with Level # 2500-3755E. To help protect the head of your jack you can also pick up the Ultra-Fab Protective Cover for Electric A-Frame Jacks # UF38-944020.
view full answer...
- Recommended Electric Trailer Jack For A 14,000lb Dump Trailer The rule of thumb for determining tongue weight is to calculate 10-15% of the GVWR for the trailer, with yours being 14,000lbs we'd be looking at a tongue weight of roughly 1,400 - 2,100lbs. With a jack you can always go heavier though, and the heavier duty you go the easier it will be for the jack to lift the tongue of the trailer. The etrailer Electric Jack w/ Footplate # EJ-3527-BBX you were looking at is rated for 3,500lbs, which is well over what you'll need, and is designed to be...
view full answer... - How to Remove Lower Cover for Lippert Electric Trailer JackThere should be 4 screws at the bottom of the jack and then 2 nuts/bolts that need to be removed that are located behind the rubber plugs on either side of the Lippert Electric Trailer Jack # LC285318. Once all of these are removed you should be able to remove the lower cover to get at the bad wiring. I confirmed this with my contact at Lippert. To help protect the jack against future corrosion I recommend using a cover like the Ultra-Fab # UF38-944020. Attached is a review video for you...
view full answer... - What Tools are Needed to Remove the Cover of the Lipper A-Frame Tongue Jack LC285318?I went out to the warehouse to look at the Lippert Electric A-Frame Tongue Jack, # LC285318. In order to remove the screws that secure the cover you will need a long and thin phillips head screwdriver. If you don't already have one, you'll want to purchase a Protective Cover, # UF38-944020, to keep your jack dry when you are at the campsite. This will protect the head of the jack and keep the motor protected from the elements.
view full answer... - Shipping Weight of etrailer's Electric A-Frame Jack w/Footplate # EJ-3520-BBXThe shipping weight of etrailer's Electric A-Frame Jack w/Footplate, # EJ-3520-BBX, is 25 pounds. This jack has received great reviews from our customers stating that it is well made easy to install. We don't put our name on just anything, so you can rest assured that this jack is good quality at a fair price. To protect your jack from the elements when not in use, I recommend the Ultra-Fab Protective Cover, # UF38-944020.
view full answer... - Recommended Cover For A Bulldog Manual Crank JackWe do carry a few vinyl covers that could be used to cover your Bulldog jack. We have two sizes available. The # UF38-944020 which is 10-1/2" x 13-3/4". We also have the # UF38-944026 which is a bit larger at 14-1/2" x 17-1/2". Both covers have a drawstring at the bottom you can use to secure it. I am not sure exactly what bulldog jack you have, but I imagine the larger cover would certainly do the trick.
view full answer... - Replacement Cover for Ram Electric Trailer JackThe Ram electric trailer jack you referenced is very similar to the Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black # EJ-3520-BBX and the cover Replacement Cover for etrailer and Ram Electric A-Frame Jacks - White # EJ-3520-CVRW is compatible with that jack. I've attached a photo with the dimensions for you to confirm. You may also want to consider the Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 10-1/2" x 13-3/4" # UF38-944020 which is a confirmed...
view full answer...
- Is There a Way to Replace Cracked Screen on Lippert Smart JackThe only way to get a new control panel would be to replace your entire Smart Jack with part # LC643589. I reached out to my contact at Lippert who confirmed that the only replacement parts for the jack includes hardware like the pin or the footplate. With this being the case your best option to protect the buttons is a trailer jack cover like part # UF38-944020. If you'd rather use a different jack then I recommend the Stromberg Carlson # SC63VR because it is rated for 4,500 lbs, features...
view full answer...
- Lippert Electric Trailer Jack Freezing in Cold WeatherI spoke to my contact at Lippert Components (LCI) and they informed me that the jack will perform best in cold weather when it is properly lubed and cleaned. To clean the jack I recommend using a brake parts cleaner and spraying down both the drop leg and gears within the head of the unit. Once these two components have been cleaned you will need to acquire some LubriMatic White Lithium grease in 14 oz. Cartiridges # L11354 and apply that to the gears on the trailer jack. Once you grease...
view full answer... - Recommended Protective Cover for Husky Brute Electric Power JackThe Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 12" x 14-1/2" # UF38-944020 is the protective cover I recommend for your DISCONTINUED Husky Brute Trailer Jack HT87247. I've attached a photo of the dimensions when laid flat, but I've also attached a video to assist with the fit. It has a durable vinyl construction with integrated draw string closure.
view full answer...
- Recommended Electric A-Frame Trailer Jack for 2011 Open Range Journeyer 340FLRTongue jacks are often rated higher than the weight of the trailer tongue they will be supporting. For tongue jack to meet your needs, I recommend the etrailer.com Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black # EJ-3520-BBX. This jack will mount to the same location on your trailer tongue A-frame and will give you a drop leg as well as a nice LED light on a separate switch to help with connecting or disconnecting. I think the best value for an A-frame tongue jack...
view full answer...
- Does the Bulldog Powered Drive Trailer Jack Need a Head CoverThe Bulldog Powered Drive Trailer Jack part # BD500187 has built-in gaskets within the head unit so further weatherproofing is not required but keeping the jack head covered will ensure the sun does not break down the gaskets over time so it's not a bad idea to keep it covered with something such as the Ultra-Fab Protective Cover for Electric A-Frame Jacks part # UF38-944020.
view full answer... - Recommended Replacement Electric A-Frame Jack For 2013 Springdale TrailerIf the a-frame jack you have on your trailer failed I recommend getting a stronger jack for your 2013 Springdale trailer. I recommend the Bulldog Powered Drive Trailer Jack, part # BD500199. This has a 4,000-lb capacity and a total travel of 22-inches. You may also want to keep a cover on the jack when it is not being used if you do not already have one. I recommend a cover like part # UF38-944020. This weatherproof cover has a drawstring that helps hold it secure to the jack.
view full answer... - Cover Recommendation for Phoenix Electric Trailer Jack # UF38-944040The Ultra Fab jack cover part # UF38-944020 is the recommended cover for the Ultra-Fab jack part # UF38-944040. This will fit the jack perfectly.
view full answer... - Replacement Manual Override Plugs For A Lippert Electric Trailer Jack The Replacement Override Plugs # LC733924 are the designed to fit the Lippert Electric Trailer Jack # LC285318. I recommend also picking a cover # UF38-944020 to help protect the head of your jack and extend its lifespan.
view full answer... - Electric Trailer Jack Has Corroded on the InsideThere are several places water can get into any given jack. Water should be able to drain out though. If the exit points which would be at the lowest point are clogged then the water would not be able to exit. You could use a jack cover like # UF38-944020 for future use. I have been using one on my trailer for 3 years and am very satisfied with it. There is no telling how much damage is really done. If there is enough corrosion then something inside could be structurally compromised and...
view full answer... - Replacement Lens Cover Options for Ram Electric Jack EJ-3520-BBXThere is not a lens cover available for the light on the # EJ-3520-BBX, so you would need to replace the whole cover with the Replacement Cover for etrailer and Ram Electric A-Frame Jacks - Black # EJ-3520-BCV. If you're going to replace the cover you may want to consider also getting the Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 10-1/2" x 13-3/4" # UF38-944020 to help protect the jack head from the elements and reduce the chances of the lens getting yellowed like that.
view full answer... - Recommended Electric Power A-Frame Jack for a 28-Foot Jayco Travel TrailerYes. A 3,000 pound electric jack will work just fine. Based on your trailer weighing 7,500 pounds loaded will equate to your tongue weight between 750-1125 pounds. Although you can choose a 2,500 pound (see link attached) electric jack, I would highly recommend the Stromberg Carlson # JET-3555 (white) or # JET-3755 (black) as they are rated at 3,500 pounds. I think you will really like the price point! I have also included an FAQ for you too.
view full answer... - Recommended Replacement A-Frame Jack For A 2014 Jayco Jay Feather Ultra Lite Travel Trailer Since your 2014 Jayco Jay Feather Ultra Lite Travel Trailer should weigh around 3,500-4,500lbs I recommend the Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500lbs # UF38-944017. This jack extends 6" in 25.3 seconds at 1,000lbs of tongue weight, to give you a bit of a speed reference. At max weight your trailer would at most have 450lbs of tongue weight. It has an easy bolt-on or weld-on installation for A-frame trailers, hardware not included, with the distance between the mounting...
view full answer... - Will the Stromberg Carlson Jack # JET-3755 Work with the Lippert # LC429756 Bike RackYes! The Stromberg Carlson Electric Trailer Jack # JET-3755 is compatible with the Lippert # LC429756 that you referenced and it does measure the 8-1/2" when retracted. You could potentially use a caster wheel like part # PS1400750340 but this would cut your tongue weight from 3,500 lbs down to 1,200 lbs. All of our caster and wheel sets have a much lower weight rating so to retain the 3,500 lb tongue weight rating you will need to keep the foot pad. I recommend using the Ultra-Fab Protective...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video by:
Andrew K
Video by:
Andrew L
Video by:
Dustin K
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chad S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Halie H
Updated by:
Eric H
Installed by:
Shane T
Installed by:
Randy B
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob B.
7/20/2014
everything is perfect one year later,a few people who borrowed my enclosed trailer asked me where I got that,because they like the protection from the elements