Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
(92 reviews)
Price: $284.05
In Stock
Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
Item # UF35-946403
Our Price: $284.05
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (92)
- Q & A (0)
- Videos (1)
- Photos
- Used (1)
Ultra-Fab Products RV and Camper Hitch - UF35-946403
- Frame Mount Hitch
- 47 - 77 Inch Wide Frame
- Weld-On
- 2 Inch Hitch
- 350 lbs TW
- Ultra-Fab Products
Use this receiver to carry a bike rack or cargo carrier on the back of your trailer. Do not use for towing. Unit welds onto I-beam, C-channel or rectangular fifth-wheel trailer frames.
Features:
- Provides 2" x 2" trailer hitch receiver opening at the rear of your trailer
- Perfect for mounting a bike rack, cargo carrier or other hitch accessory
- Do not use for towing
- Welds onto I-beam, C-channel or rectangular trailer frames
- Gusset may be required to weld onto I-beam frames
- Plate may be required to weld onto a C-channel frame
- Constructed of heavy-duty, powder coated steel
Specs:
- 350-lb Maximum tongue weight capacity
- Adjustable width: 47-1/8" to 77"
- 1-Year warranty
35-946403 UltraFab Accessory Adapter for 5th Wheel Trailers
Installation Details
Video of Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ultra-Fab Products RV and Camper Hitch - Frame Mount Hitch - UF35-946403 Review
Speaker 1: Today we're taking a look at the Ultra Fab 2" Trailer Hitch Receiver for trailer frames. This unit provides a 2" by 2" trailer hitch receiver opening at the rear of your trailer or RV. This is perfect for mounting the bike rack, cargo carrier or other hitch accessory. Please keep in mind that this is not to be used for towing applications.It welds onto I-beam, C-channel or rectangular trailer frames. Also keep in mind that a gusset may be required to weld onto I-beam frames. And a plate may be required to weld onto a C-channel frame.
Its constructed of heavy-duty, powder coated steel. Does a great job at resisting rust and corrosion. Features a 3500-lb weight load capacity and a 350-lb maximum tongue weight capacity. You always wanna be careful not to exceed the RV frame rating provided by the manufacturer. And one of the neat features about this unit is that it's adjustable.So it has these arms right here that can slide out.
It's able to adjust anywhere from 47-1/8" all the way out to 77". And it is a weld on installation. So these arms extend out. Really nice design. Same construction and same finishing as the main hitch.
And then it comes with some hardware here, and those are set bolts. So on the back side, once you have the arms extended where they need to be, you thread in the bolt here to kinda lock that arm into position. And again, it's a weld on installation designed to be welded onto the RV or trailer frame.Again, adjustable from 47-1/8" to 77". Right here you have a 2" by 2" opening. This will accept a standard 5/8" diameter hitch pin or hitch lock.
And then you have safety chain loops right here that provide a suitable point for securing any accessory that you might have if it has an accessory strap or a tie down strap or a cable or chain. That's what these are used for. Overall really nice design. And that's gonna do it for today's look at the Ultra Fab 2" Trailer Hitch Receiver for trailer frames.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames - UF35-946403
Average Customer Rating: 4.8 out of 5 stars (92 Customer Reviews)
Use this receiver to carry a bike rack or cargo carrier on the back of your trailer. Do not use for towing. Unit welds onto I-beam, C-channel or rectangular fifth-wheel trailer frames.by: Donald 05/13/2024
Had this welded to the frame of our 41' fifth wheel RV. It was used to mount an e-bike carrier. It's made it a couple of thousand miles and we have no complaints.
by: Jerri02/10/2024
This hitch was welded onto a forest river salem 28 ft trailer and it is used to carry two electric bikes which each weigh 90 lbs. plus the carrier weighs about 60 lbs and it has worked very well.
by: Marsha Z04/30/2020
We needed to add a bike rack to our Cougar 28sgs fifth wheel and felt the fifth wheel bumper would not be strong enough to support carrying bikes. We purchased this hitch and turned it upside down so it rested on top of the fifth wheel bumper and welded it to the frame of the fifth wheel for support. The hitch was a perfect width to reach the frame of the fifth wheel.
by: Steven 10/05/2023
Had it installed on back of fifth wheel and it has held up very good carrying 2 70 lb electric bikes.
Much better than the bike rack attached to it has not handled the load as well. W
I would recommend tHis hitch!
by: Ray04/27/2019
Installed this hitch along with a heavey 1/4" x 4'' steel rear costom bumper and attached them both to the frame and welded both together to make it even stronger to pull just about anything. Another trailer or a car dolly or cargo hauler.
by: James10/04/2018
I purchased this hitch receiver so that I could attach a bike rack to the back of my camper. It was easy to assemble, adjust and install with the help of a friend who is a welder. It does add weight to the back of the trailer and load needs to be adjusted to reduce trailer sway in my case.
by: Garth 03/01/2024
It allowed me to customize and weld up what I needed. Very strong.
by: Sean08/08/2018
I dont know how to weld, so I had my shop at work do it for me. Our welder had it done like like 40 minutes!
The build quality on this hitch receiver is top notch. It is very heavy, sturdy and well built. I have complete faith in the hitch itself. I plan to use a Lets Go Aero BikeWing T4 bike rack and one of my bikes is a $5000 bike, so I needed to make sure whatever I got would be sturdy and well built.
by: Jason07/13/2022
Prompt delivery. Product is much more heavily made than expecting considering it’s not recommended for towing. Quality material and construction. I plan to mount it upside down to keep adequate ground clearance on the back end of my pop up camper.
by: James01/10/2024
The package arrived on time and fortunately all items were still in the shipping carton but the carton was extremely damaged and torn open on both ends. The shipper obviously does not take care with the shipment. The picture they took does not match what was left at my gate. I am just happy to get the item with all pieces in tact.
by: Joel 05/04/2023
Great experience!! The ad was clear with helpful pics and was accurate. The order shipped in one day and delivered within three working days. It is more heavy duty than I anticipated which is great. Workmanship looks excellent. I will have to hire a welder to attach it but it should be simple and work well. Exactly what I needed to be able to transport my ebikes on the back of my travel trailer when I go camping. I will keep this company on my recommendation list.
by: Chris P03/25/2018
UF35-946403 ultra-fab weld on hitch install pics
by: Michael 04/30/2023
Very heavy duty hitch. Easy to fit in between the frame of the Rv with the adjustable arms.
by: David07/22/2019
I needed a trailer hitch for the rear of my 5th wheel toy hauler. I found this company on-line and after reading some really positive reviews I ordered one. The website was very easy to use, especially for a computer challenged user. E-mails came quickly that my order was placed and then shipped. The package arrived quickly. First thing I noticed was box was kind of, well not falling apart but kind of. Extra tape was used on both ends. When I lifted it I realized why, this thing was HEAVY! After cutting the box open and inspection I was really impressed. The paint looked good. I inspected the welds and they looked very good, very NICELY done. I will be taking my 5th wheel and this hitch to a local trailer shop for install. Overall I am very impressed with the on-line ordering, the hitch exceeded my expectation. I will be towing a small open trailer with my Side by Side on it.
David
7/22/2020
Yes it’s been a year since I bought this hitch. I had it welded on the rear of my toy hauler. The shop I used made quick work of it, a job well done. It only cost $100.00 . That is as far as I’ve gotten with it. I am modifying a trailer to haul my RZR and don’t have it done yet so I have not pulled anything with it.
by: Jon01/04/2021
Purchased the product and had it shipped to a courier pickup location. Packaging was a little beat up but no damage. Had the product installed on a 2018 36 ft fifth wheel. The product needs to be welded onto the frame and my installers had no issue with doing this. They did weld the adjustable sleeves together instead of using the bolt to tighten them together. Also had the receiver part of the hitch welded to the trailer bumper for extra support. Product is well made and the paint has held up well with no visible rust after over one year of use. Remember to paint over the weld areas. etrailer purchase was no issue and delivered on time.
Jon
1/11/2022
Product is still holding up with no issues after one year.
by: James04/03/2023
I can't rate this yet because the middle section was missing. Box had large holes torn and UPS tried to cover them with cardboard box and tape. Melissa gets 100 stars for helping me. Hopefully all the parts will make it here.
by: Matthew 04/12/2021
Packaging had me very worried, because it was taped and repaired like it been through a war on both inside and outside boxes. I would have given 5 stars otherwise. Seems like a good quality hitch and fit my application. Thank you for finding a nice product for me!
Matthew W.
4/13/2022
Still going strong after a year! Great hitch
by: Dana 09/11/2022
This is an excellent product. It was much stronger and better made than I anticipated. I had a certified welder come to my house and weld this hitch to my E-Pro trailer. I can now mount my bicycle rack to carry my two e-bikes safely while travelling. Recommended product.
by: Curtis O.05/22/2017
This is my 2nd Ultra-Fab Trailer Hitch I have ordered and installed from
etrailer. There is a reason for that, it is a great product! I have never been
disappointed from any etrailer product. The service is next to none at etrailer!
The Ultra-Fab Hitch is very well made, with quality craftsmanship. I would
not hesitate to order again. (If I have to! Dang Hail Storms in Wyoming!)
by: Harry10/17/2019
We have received the package, which was in very good condition. I have recently had knee replacement surgery and have not had a chance to have the hitch installed.
Harry R.
10/18/2020
Very well. It fit perfect and works great. Thank you.
by: Phillip 06/06/2023
Did the job perfectly!
by: Ronald10/29/2017
Excellent product. Very tough, straight and true. Had it welded up onto my 5th wheel by a trailer welding shop for about $110. I use it for a bike rack only but an equipment rack would work also.
by: Bruce08/18/2015
Excellent product! The item was out of stock but communication with ET was on great. They notified me of when the unit would be available and when it was shipped and delivered as well. It was in good condition other than being a bit scuffed up by the shipping company. It fit my 31' 5R just fine and the welder took only an hour to install it. Very sturdy product! It'll work perfectly for my bikes and would likely work just fine for a Moped as well. One word of caution; you will likely have to purchase an extension (mine is 8") for the receiver if you have a fiberglass body. It makes the bikes wobble a lot more so you'll have to use tie-down straps (a good idea anyway). Very happy with this.
by: Les F.07/11/2016
Received the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frame as promised. Installation was simple. Once positioned, clamped it and started welding. Centered the receiver and tightened the bolts then added a spot weld for backup.
by: Vino Vilano01/17/2020
I had this welded to my 40’ fifth wheel and using a Kuat bike carrier I hauled 4 large frame mountain bikes over 20 thousand miles and across the worst roads the US interstate system has to offer. It worked perfect.
25
92
Show More Reviews
See what our Experts say about this Ultra-Fab Products RV and Camper Hitch
- Recommended Hitch For A 2015 Jayco PinnacleWhen it comes to installing a trailer hitch on your 2015 Jayco Pinnacle Fifth Wheel, I recommend The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 will fit your fifth wheel. The trailer hitch can be either bolted on or welded on and can fit a frame between 47-1/8 inch to 77 inch frames. The hitch has a maximum tongue weight of 350 pounds. The hitch has a high-gloss black powder coat finish that resists rust, corrosion, and is resistant to scratches and UV damage....
view full answer... - Recommended Trailer Hitch for a 2015 Grand Design Solitude 320XIf the distance between your two frame rails is indeed 77" outside to outside or 74-1/2" inside to inside (77-(1-1/4x2)) then the Adjustable Width Trailer Hitch Receiver for RVs part # 13703 is not going to work. However, I do have the Ultra-Fab 2" Trailer Hitch Receiver for Trailer part # UF35-946403 which will work for you so long as you are not using the trailer hitch to tow. The Ultra-Fab 2" Trailer Hitch Receiver could be attached to the bumper support brackets or you could weld it...
view full answer... - Hitch Receiver Recommendation for 2007 Springdale 5th Wheel TrailerThere are two types of hitch receiver available for your 2007 Keystone Springdale 5th wheel, bumper-mount and frame-mount. The part you referenced, the weld-on Ultra-Fab # UF35-946403, is a frame-mount type suitable for use with a cargo carrier or bike rack (but not for towing). The link at right will show you all available 2-inch hitch options including bolt-on and weld-on units in a range of capacities. The best option for you will depend on your application. If you're using a small...
view full answer... - Adjustable Hitch Receiver For An RV The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 will need to be welded to actual frame of your camper. If the distance between the frame is 72" or less you'll be able to use the # 13703 to tow up to 3,500lbs or haul your bikes (up to 350lbs tongue weight). If the distance is greater than 72" then you can use the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames 47" - 77" Item # UF35-946403 but this hitch is not meant for towing a trailer and only for...
view full answer...
- Can I Carry My Bikes on the Front of My 2016 Ford F-250I'll start this out by saying that any time you use a front mounted hitch like the Curt # C31018 to carry bikes on the front of your vehicle, there will potentially be issues where the bikes might obstruct the vision at the front of your vehicle. Sometimes it's manageable, but it oftentimes depends on the vehicle and where the front mounted hitch sits. The Hollywood Racks # HR200Z is a good choice for carrying bikes on the front of your vehicle since it's a platform rack and it will keep...
view full answer... - Can Arms of Ultra-Fab Hitch be RotatedThe arms of the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 can be taken out and rotated so the welding bracket is on the backside. The receiver tube is 2-1/2 inches square and the arm with the brackets is 2 inches square so you can easily remove them and rotate them to the direction of your liking.
view full answer...
- Recommended Hitch For 2017 Coachmen Trailer with I-Beam FrameI recommend using the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703, which can be either bolted or welded onto I-beam frames with side stanchions up to 72" apart. If you need something for a slightly wider frame, the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 can fit on I-beam frames with up to 77" between the side stanchions; this hitch must be welded on to the frame, so it's not the most convenient of the two, but if you need the extra...
view full answer... - Do Fold-Out Steps Need to be Removed When Mounting Brophy Scissor StepsThat is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as when your steps are folded up there is no interference in that area the Brophy steps will be a great option. I added a photo for you a customer sent in which shows the bracket and steps installed so you can get an idea of how they mount. The...
view full answer...
- RV Hitch For 2021 Twilight TW2620 to Carry E-Bike RackBefore we get into the hitch fabrication you should note that the Thule EasyFold XT part # TH903202 is not rated for use at the rear of a travel trailer but Yakima has a similar e-bike rack that is with the OnRamp part # Y36FR which would work great. Now for a hitch that can connect to an I-beam frame we have the Curt # 13703 which basically fits all standard RV frame styles where the channels are between 22 and 72 inches. This is the most universal multi fit hitch and can be used with...
view full answer... - Recommended 5th Wheel Hitch For A 2022 Arctic Wolf 3550 Towed By 2022 Chevrolet Silverado 2500The maximum weight capacity for a trailer hitch on your 2022 Arctic Wolf 3550 5th wheel will be dependent on its frame. I recommend the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames, part # UF35-946403. It has a maximum tongue weight of 350 lbs. It can fit on campers with frames from 47" to 77" wide. It will need to be welded on to your 5th wheel's I-beam, C-channel, or rectangular trailer frame. I have included a product description link and a video review link below.
view full answer... - How To Use A Hitch Mount Bike Rack On A 5th Wheel TrailerYou will have to go with a 2" hitch receiver on your 5th wheel. One of the reasons we do not recommend the use of a 1 1/4" receiver with a 5th wheel is because the ride is rougher at the rear of a 5th wheel due to it being so far away from the rear axle of the vehicle. This distance introduces extra forces and motion to the bike rack and the suspension of trailer is not as sophisticated as the vehicle towing the trailer. You also cannot use a hitch adapter to change your hitch receiver...
view full answer... - Where Does Ultra-Fab Trailer Hitch # UF35-946403 Weld to an I-Beam FrameTo weld on Ultra-Fab hitch # UF35-946403 to an I-Beam frame you would need to weld the perimeter of the side brackets to the frame everywhere they make contact with each other. So that would be the entire bottom of the bracket and a little on the vertical parts of the brackets.
view full answer... - Recommended Trailer Hitch Options for Rear of 5th Wheel Trailer w/ Frame Members 67 Inches ApartWe do offer some hitches that will work for you, but I'm not finding a hitch with the # 37042 part number you mentioned. If the 67 inch measurement you mentioned is the outside frame member to outside frame member dimension, Ultra-Fab offers the # UF35-946403 that would work well for you. If the measurement you mentioned is the inside frame member to inside frame member dimension, then go with the Curt # 13703. Before installing the hitch, you'll need to check with the manufacturer of...
view full answer... - Can Airstream have Hitch Installed at Rear of itDo you mean at the rear Airstream? This is possible with an RV multi fit hitch like the part # 13703 as long as the frame width on the RV is between 22 and 72 inches in width.
view full answer... - Can the Ultra-Fab 2" Trailer Hitch Receiver Be Mounted Upside Down? I went out to our warehouse and measured the thickness of the L-Brackets on the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 and measured .34" or 11/32" thick. As per the second question, you are not going to be able to mount this hitch upside down as the mounting brackets that mount to your frame need to be oriented in the way they're designed.
view full answer... - Recommended Trailer Hitch for 2007 TrailmanorThe Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 will fit trailers that have a 47" to 77" wide I-beam, C-channel or rectangular frame; it is a weld-on hitch that may require a gusset to weld onto I-beam frames or plate to weld onto a C-channel frame. The Ultra-Fab may work for you but there is another option I also recommend checking out, the Curt # 13703. This hitch fits box, C-channel, or I-beam frames that are between 22" and 72" and can be either bolted or welded...
view full answer... - Recommended RV Hitch and RV Hitch Bike RacksWe offer hitch receivers for use on RVs that you can see on the linked page. Both bumper-mount and frame-mount type hitches are made and it will be a good idea to check with your trailer's manufacturer to confirm which type is best for your particular RV. Examples of both types are parts # C19101 which fits 4 x 2-inch bumpers (as long as they are NOT a C-channel type) and # UF35-946403 which fits trailer frames between 47-1/8- and 77-inches wide (measured outside edge to outside edge). Once...
view full answer... - Trailer Hitch Receiver and Ball Mount for 1979 Plymouth VolareWe don't have a custom fit trailer hitch receiver for your 1979 Plymouth Volare. We are a retailer and not a hitch manufacturer, so we don't make the hitches we sell. I'd suggest you consider having a local fabrication shop help you fabricate an option utilizing something like the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frames, # UF35-946403. There will need to be special fabrication to fit your vehicle, but this hitch will get you started. You will also need a ball...
view full answer... - Trailer Hitch for a 2015 Camp Lite Trailerto answer your first question, anywhere at all that you can attach the strap will work provided the attachment point on the trailer is higher than the attachment point on the accessory. There isn't a right or wrong place. It just has to be on there. For the hitch, # 13703, you will not want to modify it at all because doing so will void the hitch warranty. If this hitch is not going to work without modification I recommend looking at another option, # UF35-946403 for 47 to 77 inch wide...
view full answer... - Adjustable Trailer Hitch Receiver Options For A 2018 Jayco Pinnacle 5th WheelYou shouldn't have any issues fitting the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 to your 2018 Jayco Pinnacle 5th Wheel, however you'll want to measure your frame's width to be certain. We do also carry a larger one # UF35-946403, which fits trailer frames 47-1/8" to 77", or, should you need a smaller one, we also have the: -Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702, -Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide #...
view full answer... - Looking for RV Hitch With Drop of At Least 3 InchesThe measurement you're looking for is referred to as the drop. The # UF35-946403 Hitch has a drop of 2 inches, which wouldn't be sufficient for you. Curt offers the # 13703 hitch that has a three inch drop, but Curt's warranty requires that a stabilizing strap like part # 18050 be used for non-trailer loads like bike racks or cargo carriers. Since most motorhomes and trailers don't have a good spot to attach the strap, I'd pass on that one. Your best bet would be a hitch like the Draw-Tite...
view full answer... - Recommended Receiver Hitch For 2016 Cardinal With 10 inch I-Beam FrameFor your 2016 Cardinal with 10 Inch I-beam frame, I recommend the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frames # UF35-946403 if your frame is 47-1/8 to 77 inches wide. This is a weld on application. If you trailer width is 22- 72 inches wide, I recommend the Curt RV hitch # 13703. This hitch can be bolted or welded in place. This hitch will require stability strap # 18050 for any non-trailer load.
view full answer... - Recommended Trailer Hitch For 2016 KZ Sportsman Travel TrailerThe trailer hitch receiver I recommend is the Ultra-Fab # UF35-946403. This trailer hitch welds onto the trailer frame. This hitch will work with I-beam, C-channel or rectangular trailer frames and adjusts to work with frames from 47-1/8 to 77 inches. You can compare the mounting bracket of the # UF35-946403 hitch to the Curt hitch # 13703. The Ultra-Fab hitch will sit about 3 inches higher than the Ultra-Fab hitch does. I have attached a photo of both hitches you can compare.
view full answer...
- Recommended Motorcycle/Scooter Carrier With Hitch Receiver For MotorhomeYou do not need a bumper to add a hitch and carrier for your scooter. I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702 or the # UF35-946403 which adjusts from 47-1/8 to 77 inches. Either of these hitch receivers will mount to your motorhome frame so a bumper is not needed. This can be used with thetrailer Motorcycle Carrier for 2" Hitches - 500 lbs # e98873 for your scooter. I recommend the Motorcycle Soft Loops # 06303 along with the Erickson...
view full answer...
Do you have a question about this RV and Camper Hitch?
Used Items Available
Condition: Badly Dinged
Notes: Parts are beat and chipped up.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Halie H
Updated by:
Noah M
Video Edited:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Marsha Z.
5/1/2021
Great very sturdy and well made