Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
(467 reviews)
Price: $3.77
In Stock
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Item # TRBU11566
Retail:$4.08
Our Price: $3.77
You Save: 8%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (467)
- Q & A (0)
- Videos (1)
- Photos
TruRyde Trailer Suspension Parts - TRBU11566
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 1-3/4 Inch Long
- 9/16 Inch ID x 11/16 Inch OD
- TruRyde
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.
Features:
- Inner diameter: 9/16"
- Outer diameter: 11/16"
- Length: 1-3/4"
- Quantity: 1
BU1-1566 TruRyde Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter
Video of Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Truryde Nylon Bushing Review
Hello neighbors, it's Brad here at Etrailer and today we're taking a look and installing the true ride trailer suspension bushings. When doing any suspension work on your camper or RV, your suspension sees a lot of wear and tear just going down the road. And part of that is gonna be some wear parts like our bushings here that go in between all of our connection points that do tend to get a little bit worn out. The nylon over time will crack and just break down. So while you're doing any of that suspension work, it might be worth picking up some new nylon bushings and get these in place. That way you have a freshened suspension.
It's really gonna make sure that there's no major gap between the bolt as it goes through your leaf spring. And that's just gonna cut down on any extra movement that doesn't need to be there. This is gonna fill that space, making it a little bit more smooth and it's just gonna lessen the wear that's happening on your suspension. Now these are pretty standard for most trailers and RVs and that standard size is gonna be a 9/16 inner diameter. 11/16 outer diameter and it's gonna be one and three quarter inch long.
Now nylon is a great option if you don't have wet bolts. And the way you can determine that is the bolts that you have here, there's no grease circs on there. That you're gonna want to use these nylon and that's because there's no maintenance. These just once they wear out, they're a wear item. You can replace 'em with new ones like we did today.
If you do have wet bolts, you're gonna wanna look at the brass ones and those are meant to actually be lubricated. So there is maintenance involved with those. Basically just lubricating those on a regular interval as you use them. Sometimes these are super easy to get out and also easy to replace and get a new one in, but not always the case as they do get chewed up over time, sometimes you'll have to fight with them a little bit and I do have some pointers to help you along, no matter what condition they're in. So I'll walk you through that and that way you can get new bushings put on your camper.
Now the first step to get our bushings installed is gonna be to jack up your camper or your trailer and that way we can get the wheels and tires off. We're gonna just work on one side at a time. (drill whirring) Now we're gonna be attacking one side or one axle at a time. And I think the best way to really help to make sure we can get everything out nice and easy and also lift it back in place because it will be under tension, is to put a floor jack under the axle and that's gonna support it. And also that's gonna allow us to slowly drop it or slowly raise it back into place. And once we have that supported with an 18 millimeter socket, we're gonna go ahead and we're gonna take off our bolt here. It's just a shoulder bolt and these are spline. Normally these aren't gonna spin, so as long as we get this nut off, we'll be able to hammer this bolt out. Now to get the bolts out, unless you're replacing it with new bolts, what I recommend doing is take that nut and you're gonna wanna just put this on the end, just a few threads here and that's to make sure that we don't hammer or mushroom out the end of the bolt. And so just kind of make this to where it's gonna be nice and flat on here. And once we start knocking it loose, it's gonna allow it to kind of loosen up and we can get those splines out. Now it might be helpful to put just a little bit of pressure on the jack to raise that up to kind of unspring that tension that's on that bolt. Now you're probably gonna be doing the other bushings as well, so if you're getting too much tension on that bolt and you really can't get it to be loose, you can go ahead and take off your shackle bolt and sometimes that's gonna allow us to kind of move this to get that tension off. So I'm just gonna get this one taken off there. (drill whirring) And then same thing, we're gonna try to knock this one loose. (hammer thudding) And once you kind of feel the gap, sometimes you can pry on that backside there, but you can see here we got our bolt taken out. I'll go ahead and I'll get this one taken out now. (hammer thuds) I can see I got that gap there. I can back this nut out a little bit, see if we can't get the rest of it or just take that flat head and kind of pry on this as you're hitting it. Now at this point, I got it pushed back a little bit so as I've raised this up I can start to kind of find where that tension is and you can see I'm able to kind of get this pulled out by hand. And that's gonna get us to where we can attack this bushing. Now, so these bushings actually don't look horrible compared to what I've seen. Some of these can really get misshapen, start to crack and become brittle and that's where getting these out can be tricky. You may think that just a pair of ply outs to get that out, but there's a decent amount of surface area and there's been a lot of tension that's kind of pressed this really into there. So there's two ways that I recommend to get these out nice and easy. The first one is kind of the general way to do it is a 7/16 socket is small enough to go through the hole on our leaf spring, but large enough to kind of press this out. So just a few quick taps here. Do be careful though you want to go in as straight as possible and they may start to kind of deform as you do this, but pretty easy. We can get this one popped out and you can see it is pretty misshapen here. So to get our new one in, we'll just take this here and a lot of times you can get this pressed in by hand, just kinda make sure it's evened up on both sides. If you need to hammer it in, a block of wood against that nice and squared up to the leaf spring is gonna be a good way to do that. But if you're really struggling with this bushing and you can't get it up, I do have another tip for you. You can take an 11/16 socket and that's gonna be the same diameter as the outside of our bushing. So as long as we go in nice and square with the eyelet on our leaf spring, this is gonna just kind of bore this out for us. So I'll run this in, back it out, run it in, and eventually it's gonna break it down into pieces that we can easily get this taken out. And then you can see this kind of, the bit will definitely tear up your old bushing, but that's okay, it's gonna extract it out. So really in those tough cases where that socket's just not really pushing it out, this is a great way to do it. And if you can't quite get it by hand, you can use a dead blow hammer to lightly knock this in. Again, a block of wood also works really well, but just kind of persuade this along, make sure it's nice and even. So at this point we can go ahead and get our new bolts in unless you're doing any other suspension work, sometimes it is easier to leave your leafs like this and then do your equalizer. So if you want to tackle one or the other, but having that floor jack underneath our axle right now, makes it to where to get our shackles back in place is gonna be easy. I can just slowly raise that up until we get this all aligned on both sides. And then also again, having that jack to just fine tune this into place is gonna be key. So we'll go ahead and we're gonna get this put back in place And a lot of times, I'll just hit on the head of the bolt, just to kind of get those splines to drive back in. (hammer thuds) And then we can tighten this down and that's gonna further draw that in. And that was a look and installation of the True Ride trailer leaf springs suspension bushings.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Product did not meet expectations
Customer Reviews
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - TRBU11566
Average Customer Rating: 4.8 out of 5 stars (467 Customer Reviews)
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.by: Archie10/27/2022
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
by: John03/16/2023
Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.
John
3/18/2024
Most bushings worn out in a short period of time. Shackle bolts developed significant wear after a year and now require replacement.
Mike L.
3/19/2024
@John Bronze bushings definitely last longer, so that's what I'd recommend.
by: Lloyd 03/25/2023
My Oder arrived very quickly. Exactly what I need and ordered. Will use etrailer again
Lloyd
3/25/2024
1 year and the bushings are doing the job. Trailer is very quiet now. When needed will buy this product again.
by: Chris06/10/2018
I Waited Too Long to Replace Trailer Bushings
-The past few years I would hear “clunking” sound (different than “squeaking”) from my boat trailer, but I got concerned this year as it seemed louder.
-With the boat off the trailer I could see wear around the shackle bolts
-I called eTrailer to order the parts and was helped by Kayla to order the bushings/shackles/bolts/nuts for my tandem axle trailer
-After trying to press the bushings in I realized I measured poorly and had two different bushings, the equalizer had 1 size and springs had a different size.
-Amanda helped me get the second set of bushings (delaying the project for 5 days…but my fault)
Right or wrong:
-I applied anti-seize compound to the shackle bolt threads
-I pre-loaded the “wet” bolts with marine grease to fill them up before inserting them into the suspension, adding grease when everything is installed
-I tightened the bolts very securely and they backed off the nut ½ turn to allow for suspension movement
Lessons learned:
-Look for different size bushings in equalizer/springs and measure correctly ID & OD precisely
-It takes some time to do this job (about 4 working hours per side) so try to do it when you are not under pressure
-If you want the re-paint some parts, allow for primer and top coat drying time, i.e. overnight which adds time to the project, but it comes out better
-Have a big breaker bar & extension/enforcer to help get the nuts on & off. My ½” impact gun could not tighten them all the way
-A large “C” clamp will press the bushing in smooth & straight instead of using a hammer & block of wood “caveman style”
-Annually inspect your trailer suspension for signs of wear and listen for increased noise
Thanks again to Kayla, Amanda and eTrailer for help with this project.
by: John04/25/2024
Wish bushings were brass
by: James03/19/2018
I had one broken leave Spring Shackle so i Replaced All of the Shackle Brackets & Bolts & Bushings everything worked Great finished project in no Time Thanks for Everything
by: David K07/10/2022
Fantastic! Shipping was fast, it fit and the replacement is finished. Only flub was me ordering four instead of 6.
The attached pic shows how bad the old bushings were and why I was getting tread wear down on the inside of the tire.
by: Shawn03/05/2024
Parts r good quality fit good would order from trailer again
by: Tim 02/17/2024
Bushings fit perfect and stopped all ra ttling
by: Ronald 03/08/2024
Perfect fit and replacement for my worn out bushings
by: Justin12/02/2014
I ordered 8 of these, and 2 came with cracks longitudinally. I called customer service (on a sunday, which is nice), and they are getting 2 new ones out to me. Otherwise the 6 good ones were fine and installed with no issues. Once I receive the other 2, i will bump this review up from a "2" to a "3" or "4".
by: Chris02/14/2024
Good product but I ordered 4 and only received 2 when can I expect the other 2
Jenny N.
2/24/2024
Looks like there was a mistake on our part. I will have our Customer Service team reach out to you.
by: John04/22/2024
Product as described and holding up well
by: Steve09/02/2023
Leaf springs were great. One was missing a bushing, so they express mailed one to me right away. They are by far the best customer service of companies I deal with!
by: Steven 03/17/2024
Exactly what I needed
by: George05/03/2024
Can't use them with the wrong bolt
by: Lynes Special Delivery 09/20/2017
Couldn't be more satisfied! I change from 5 on 5 to 5 on 4.5. I've been rolling on these hubs about 2500 miles. Every time I jack up the trailer I spin the tire, smooth as ever. Thankx LSD
by: Ronald 04/29/2024
Great fast service
by: Bill07/10/2023
I am rebuilding an old trailer and was lucky enough to get Justin on the phone. Hel listened to my needs and searched until he found the hanger bolts and bushing the fit my equalizer perfectly. He is a real pro! The trailer is coming along great thanks to your great staff
by: David06/23/2021
I replaced leaf springs on my trailer , springs , unbolts and leaf eye bolts were perfect fit and the job when easy the hard part was getting the old springs off. I know now to keep them siliconed up from now on for future problems.
David E.
6/24/2022
Great no issues
by: Rob S03/11/2024
Fit perfect.
by: Ric 07/16/2023
Two of the 6 bushings arrived broken because they were shipped in the sa.e box as the heavy spring. The were o ly packed in a lightly padded envelope!
by: Travis08/17/2022
Came with the bushings all individually in the box vs an all in one bag/package. Ordered 8 but in the box was only 6 clearly lost from transport which is very frustrating and now unable to finish the project in time before our travels. Do not buy from etrailer buy the same ones from Michigan Truck for a 1/3 of the price.
Katrina B.
8/29/2022
I am sorry to hear that your order arrived in this condition. I have sent your information over to our customer service department for them to better assist you.
by: George01/31/2024
Got for stock, not used yet
by: Steve02/04/2024
Parts are a 5, delivery options questio nable.
25
467
Show More Reviews
See what our Experts say about this TruRyde Trailer Suspension Parts
- Are the Never Fail Bushings or Bronze Bushings Offered for 2 Inch Wide Leaf SpringsThe Never Fail Bushings like part # TRBU11566 and the Bronze Bushings like part # D014-077-00 are designed for 1-3/4" wide double eye leaf springs. There is not a version of these which are an upgrade over the factory nylon bushings for 2" wide leaf springs. Therefore, if you have 2" wide leaf springs you will need to use the Nylon Bushing part # TRBU12566.
view full answer... - Availability of a Trailer Suspension Equalizer Kit With 6-1/4 Inch Long EqualizersWe don't offer a equalizer kit that incorporates the # TREQ458 you're needing, but you can obtain the necessary parts separately. We offer a 3/4 inch wet equalizer bolt as part # 126A1. 9/16 bushings with a OD of 11/16 is part # TRBU11566. If you need an OD of 7/8, use part # TRBU11568. You can see the shackle links and bolts we have available by clicking the provided link.
view full answer... - How to Determine Axle Placement on a Custom 5 x 9 ATV and Motorcycle TrailerWhen determining the axle placement on a trailer, an important factor to consider is the tongue weight. You want the tongue weight of the trailer to be approximately 10 percent of the gross trailer weight. Moving the axle rearward will increase the tongue weight of the trailer. A heavy tongue weight could cause issues with traction and sway when towing, but that is not as much of a concern on smaller trailers than it is on larger travel trailers or enclosed trailers. First, we want to...
view full answer...
- How to Determine Correct U-Bolt Kit and Leaf Spring Bushing for a 6,000 Lb Trailer AxleA 6,000 lb axle is usually going to be 3" in diameter. Therefore, for the u-bolts you can use part # APUBR-8 for 7" long or part # APUBR-9 for 7-1/4" long. You can measure your existing u-bolts or from the bottom of the axle to the top of the leaf spring pack in order to determine which length you need. You can always choose the longer option and cut away any remaining threads if necessary. Most leaf springs for 6,000 lb axles are 1-3/4" wide and will use a 9/16" bolt. If this is the case...
view full answer... - Troubleshooting Tandem Axle Trailer Leaf Springs Hitting Trailer Frame at EqualizersIt does look like you have shackle straps that are to long and possibly worn out bushings. You can replace your shackles with the 2-1/4" Shackle # LC122487. You will need 8 of these for the entire trailer. I would recommend pulling a couple of the Shackle Bolts # TRFA73Z916DLNZ to determine if they or the Nylon Bushings # TRBU11566 are worn and causing extra clearance which may explain if this is something that just started happening recently. You will need 14 of the bushings and 8 bolt...
view full answer...
- Can Nylon Bushings for Trailer Suspension be Used with Wet BoltsYou can use wet bolts with nylon bushings or bronze bushings. It does not matter which material the bushings are. Also nylon and bronze bushings have about the same longevity.
view full answer... - Recommended Bushings and Bolts for Trailer Suspension UpgradeThe Bronze Bushings # K71-291-00 will work well with the wet bolts # 34007-187-00 which are 3-5/8 inches long. The usable length is 2-1/4 inches which will work well with the bronze bushings that are 1.74 inches long. As you stated, wet bolts can vary in length and should not be used with the nylon bushings # TRBU11566 as they cause them to break down prematurely. If you are simply wanting a bushing kit that requires no maintenance and will last, I recommend the Never Fail Tandem Axle...
view full answer... - Size of Bushing Inner Diameter in Slipper Leaf SpringsReplacement trailer leaf springs should be selected based on axle weight rating and also on spring length. The 2-Leaf Slipper Spring # SP-177275 fits 1000-lb-rated axles, is 24-5/8-inches long and has 9/16-inch inner diameter (11/16-inch outer diameter) bushings like # TRBU11566. None of the slipper springs we offer has a 1/2-inch inner diameter bushings, either 9/16-inch or larger. All such springs are shown on the linked page. Be sure to replace your springs in pairs to avoid issues...
view full answer... - Upgrading Leaf Spring Equalizers on a 5th Wheel RV With 6,000 lb AxlesTo upgrade your leaf spring bushings and equalizers on your 5th wheel RV with 6,000 lb axles you will first want to measure the distance, center on center, of the two holes where your leaf springs and shackle straps connect to your current equalizer. Our Equa-Flex equalizers are a great upgrade option and they include the 3K-6K, part # LC279687, that have a 5-1/2 inch measurement, and the 6K-8K, part # LC279688, which have a 7-1/2 measurement. You will want to choose the equalizers that...
view full answer... - Are Bushings Included in Double-Eye SpringsBushings are sometimes included in double-eye leaf springs. Sometimes they wear out and need to be replaced. You can purchase replacement bushings separately. You will need to know the bushing's inner diameter, outer diameter and the length of the bushings to order replacements. It does not matter which material, nylon or bronze, the bushings are. Also nylon and bronze bushings have about the same longevity.
view full answer... - Dimensions of Hangers and Equalizers on Tandem Axle Suspension on 16-Ft TrailerFront and rear springs hangers should be equally spaced around the center hanger and spring equalizer. It may be that your trailer was modified (if not originally built) with a different height center hanger and that might be how the spacing became how it is. Also, it may be that at some point the shackle straps were changed to a different length - we offer three different lengths: 2-1/4-inch, 2-5/8-inch and 3-1/8-inch. On a tandem axle trailer the 2-5/8-inch length is most common. It...
view full answer... - How To Determine Trailer Leaf Spring Replacement Based on Axle Capacity and Other Components UsedFor your replacement leaf spring, there are a few things to consider. The number of springs in the stack doesn't determine the capacity, so you will need to know the capacity of your axle so you don't have springs that are too stiff or not strong enough for your application. For instance, if your springs are for a 3,500 lb axle, then the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long # SP-210275 may be the correct replacement even though it is 4 leaf versus 6 because the...
view full answer... - Availability of Nylon Trailer Leaf Spring BushingsWe do offer nylon bushings for trailer leaf springs as separate replacement parts. For example, we have part # SP05-080 from Redline, which is a set of four (4) two-piece nylon bushings. These measure 9/16-inch inner diameter, 1-5/16-inch outer diameter and 2-inches in length. Other sizes are also offered and these are linked below. # TRBU12566 # SP05-060 # TRBU11508 # TRBU11561 # TRBU11566 # TRBU11568 # 721590 # TRBU13871 # TRBU11506
view full answer... - How Tight Should Nuts of Trailer Suspension Shackle Bolts be Torqued ToShackle bolts don't typically have a specific torque value. They're usually tightened until the knurled portion of the bolt pulls completely into the shackle strap and the bolt head is ran all the way down to the shackle strap and you have at least 2 threads extending past the face of the nut.
view full answer... - Can I Use Grease To Lubricate Nylon Bushings On Trailer Leaf Springs?I never recommend using grease with Nylon Bushings # TRBU11566. The grease can trap dirt which will cause the nylon to become damaged easier. And the chemicals in different greases can cause the nylon bushings to break down. If you want to use Grease # L11390 on your suspension system I recommend using Wet Bolts # 126B2 with Bronze Bushings # D014-077-00. This will allow you to apply fresh clean grease inside the bushing while pushing out the old grease and dirt.
view full answer... - Leaf Springs Replacement For My 2003 Forest River Sierra F37 5th WheelIn order to get the correct size leaf spring for your 2003 Forest River Sierra F37 you need to measure from center of one side of the spring roll to the other with no weight on the axle. There are different length springs for a 6000lb axle. If your spring eye measurement is 26" you need 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long Item # e94SR. If Your spring measurement is 25-1/4 you need 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long Item # e34SR. I...
view full answer... - Leaf Spring Bushings For Tandem-Axle Hanger Kit # APT8Our Tandem-Axle Hanger Kit, # APT8, comes with the bushings already pressed into the equalizers, but it does not include the bushings for the leaf springs. If you need bushings for your leaf springs, you will want to pickup up 8 of part # TRBU11566 for standard nylon bushings or we offer Lippert's Never Fail Bushing Set, # LC279684. This set includes 8 bushings, so you will only need to purchase a quantity of 1. The Never Fail bushings cost more, but they will perform much better over...
view full answer... - What Type of Bushing Comes with 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer AxlesThe bushing that comes with the 4-Leaf Slipper Spring # SP-179275 is a nylon bushing like part # TRBU11566 so you need a standard non-grease bolt like part # 166079 for the installation. The nylon bushings are pressed in there by themselves without any specific type of sleeve.
view full answer... - Should Trailer Hangers be Spaced Equally Apart on Tandem Axle Trailer Ideally you want the hanger spacing to be the same on a dual axle trailer like what you are building but a slight difference may not cause any issues. The shorter spacing that you have between the equalizer and one of the outside hangers essentially results in a leaf spring stack that is just a tad too long. The only thing you will want to watch out for is the chance that the shackle straps on the equalizer can make contact with the trailer frame. What you can do is manipulate the suspension...
view full answer...
- Replacement Bushing For 4-Leaf Slipper Spring e24SRThere is indeed a replacement bushing for the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 27" Long # e24SR; the correct part is the following: - Nylon Bushing # TRBU11566
view full answer... - What to Consider When Replacing a 3,000 Pound Single Axle Trailers Leaf SpringsIf you use a higher rated leaf springs on a lower rated trailer they will work but will cause stiffness in your ride quality. This is due to the trailer not being under the heavier weight therefore less flex of the springs, using a higher rated spring will not increase the capacity of the trailer because the trailer itself cannot support more than the stated 3,000lbs of weight. When replacing leaf springs you will want a new u-bolt kit like # APUBR-1, the correct shackle bolt like # 166081,...
view full answer...
- Size of Nylon Bushing Needed For Double-Eye Leaf Springs on Triple Axle Trailer with 7,000-Lb AxlesIf you are replacing the leaf springs on your triple axle trailer with new springs the bushings will be included in the new leaf springs. If you are just replacing the bushings in the double-eye springs for a 7,000-lb axle you will need the TruRyde Nylon Bushing, part # TRBU11566. These bushings have a inner diameter of 9/16 inches and an outer diameter of 11/16 inches. The length of the bushing is 1-3/4 inches. These bushings are what fit the Double-Eye Spring, part # PR-6, that we carry...
view full answer... - Availability of Equalizer Kit for 5-3/4 Inch Curved EqualizersWe have a kit for 5-3/4 inch long equalizers that will work for you, but it will include replacement hangers. The # K71-449-00 kit does not include hangers. The kit you will want to use is the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # AP233-H248. This kit includes 2 of the 5-3/4 inch curved equalizers like you referenced. Also included are shackle straps, shackle bolts, and lock nuts. The included hangers measure 3-1/4 inches tall for the front and rear, and 3-5/8 inches...
view full answer... - Bushings Used with TruRyde Double-Eye Springs Equalizer TREQ105The Never Fail Triple Axle Suspension Upgrade Hardware Kit # LC281288 that you referenced is designed to be used with the 6-3/4" long Equalizers # TREQ105. These equalizers feature standard nylon bushings # TRBU11566, so you will definitely want to replace them with the Never Fail bushings that come included with the upgrade kit to receive full benefit. The Never Fail bushings have an extra-durable polyamide construction that simply never wears out so you don't ever have to worry about...
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Video by:
Kathleen M
Installed by:
Randy B
Installed by:
Bradley B
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Wilson B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Archie
10/28/2023
Still holding up well and I always keep them wet with grease and after that if looking dry apply 50 weight oil just before you leave to work it into the sleeves, looking like new ones still, and I still couldnt beat your price that I got the full set for tandem axles hope you helped others out like me, good product