Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer light provides brake, tail, and turn signal functions. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design with 0.180 male bullets.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at an Optronics 6 inch LED surface mount trailer light. Now the light provides your trailer with tail, stop and turn signals. It features long lasting LEDs which are great replacements for incandescent lights. LEDs last longer, they burn brighter and they're more efficient. With LEDs you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.The unit contains a nice polycarbonate lens and housing. It's very strong and durable.
It is SAE and Department of Transportation compliant. It's a surface mount installation with the built in mounting flange, mounting hardware not included. When it comes to the wiring we're looking at a three wire design. So you have your black wire, which is for power, that's for your tail lights. Red wire is for your stop and turn signal.
Then white wire is your ground wire. Each wire has the male bullet connector on it. Now for your trailer doesn't accept this type of connection you can actually cut these off, strip back the wires and you can hard wire it if needed.A few measurements to go over this real quick, then we'll hook it up to power and you can see what it looks like with power running to it. The overall measurement that we have going edge-to-edge this direction is about 7-9/16th inches. Edge-to-edge going this direction is 3-5/16 inches.
The overall thickness front to back is about 3/4 of an inch thick, or 3/4 of an inch deep. The mount holes, right here, these are separated on center apart from 1 another by about 2-3/4 inches. Then the mount hole separation going this direction center on center is pretty close to 7 inches, it's about 6-15/16 inches, right in that area.We're going to go ahead and hook it up to power. Again, white is our ground. Black is our main power wire.
Then red is our stop and turn. We'll turn off our overhead light so you can see it in a low light setting. As you can see, the unit has multiple LEDs, or multiple diodes, so the multi-diode design really helps optimize the overall light output. This is the tail light function. When we apply the brakes you can see how the signal output increases. It'll do that same thing when we activate our turn signals.Now when it comes to power draw at 12.8 volts. For the stop and turn signal we're looking at 0.243 amps. For the tail light we're looking at 0.046 amps. Go ahead and do that same sequence with the lights on. Optronics also puts a lifetime warranty on their LEDs.That's going to do it for today's look at the Optronics 6 inch LED surface mount trailer light.
Average Customer Rating: 4.6 out of 5 stars (30 Customer Reviews)
7-9/16" x 3-5/16" Oval. Waterproof LED trailer light provides brake, tail, and turn signal functions. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design with 0.180 male bullets.Perfect fit, after contacting etrailer for info on wiring hookup, all went smoothly.Very reasonable price as well. Thanks etrailer for getting my Horse Trailer back to new status.
Nice lights; see my 2023.07.23 Curtis Cargo Carrier review for more pics.
I bought two lights. After a few weeks one of them developed a couple of dead spots. The other is still good a year later.
Brooke M.
5/10/2022
Thank you for the review! This item has a warranty and our customer service team will be reaching out in the near future.
I ordered 4 led lights to replace the ones failing on my living quarter horse trailer. Lights came quickly. A few days later I began the removal and installation which I anticipated as a quick process. These were 10 lite LED tail,brake and stop lights. First one, surprised only 7 of the lite lit on the light. Hmmm. Grabbed a new light an it worked.
Installed the next 2 and they worked fine. Tried the defective light in last location it still did not work.Sent a note to Dylan explaining what happened. We will send out a new light today. GREAT customer service from e trailer. New light worked fine.
THANK you e trailer
Replaced all four-trailer light-stop-turn taillights with Optronics LED Submersible-10 Diode-Oval-Red lights. The lights have been working perfectly in the hot and cold North Dakota climate for over a year. Very pleased!
Was awesome and works great, very brigh t!
I received the trailer light replacements quickly! Thank you!
Easy to install, works great. Happy with this product
great service great products
Awesome! You all are quick! Can't wait to get these installed! Thank you for your superior service and looking forward to doing more business with you all.
Again thanks!
Three stars fair service. Slow deliveries, but with todays covid understandable. Keep up the good work. Thanks.
Great product. Replaced my old ones and they fit perfectly
excellent service
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Daniel
1/16/2023
Still working just fine.