Rear View Safety Cigarette Lighter Adapter

See what our Experts say about this Rear View Safety Accessories and Parts

• Recommendations For Replacing Cigarette Connector On Blue Ox Patriot 3 Braking System
  You might consider replacing the Cigarette Lighter End # RVS-505 of the cord on your Blue Ox Patriot 3 braking system. The best route would be to replace the entire power cable but this will involve taking apart the main unit to attach the power wires. We have the 12 Volt Extension Cable # RM-9331 which you can cut the female connector off to attach the wires on the Patriot 3 control board inside the unit.
  view full answer...
• What Are The Dimensions Of The Rear View Safety Cigarette Lighter Adapter?
  The Rear View Safety Cigarette Lighter Adapter # RVS-505 measures 9-1/2" from the tip of the wires to the start of the 12v cigarette lighter, additionally this adapter also has an overall length of 13". Attached is a diagram that shows these measurements as well.
  view full answer...
  
• Parts Needed to Power Fantastic Fan Roof Vent Using 12 Volt Cigarette Lighter Plug
  Yes, you can wire the Rear View Safety Cigarette Lighter Adapter # RVS-505 to your Fantastic Fan # FV802250. All Fantastic Fans, including # FV802250, use the same "pancake style" motor which draws 4 amps so in order for a portable power bank with a 12 volt DC outlet (like the Goal Zero # 287-22004) to be able to power the fan, it has to be rated for at least 4 amps and 48 watts. This is calculated using the following formula: Amps = Watts ÷ Volts OR Watts = Amps x Volts
  view full answer...
  
• 12V Space Heater for Warming Bed w/ a Hard Shell Cover
  Depending on the seal around your hard shell's opening and whether or not you have side windows you would have no problem using a 300 watt heater like the Rampage Radiant Backseat Heater item # RA3501 to keep you warm. A 300 watt heater is designed to warm a room that is 30 square feet. Your short bed 2019 F-150 will be right at that square footage. You will need the Rear View Safety Cigarette Lighter Adapter item # RVS-505 to power this heater. You will also want to make sure you have...
  view full answer...
• Cigarette Lighter Adapter Recommendation for Use with Rear View Safety Backup Camera RVS-5350-W
  Rear View Safety actually makes a cigarette lighter adapter that you can use with their # RVS-5350-W. For that you'd want the part # RVS-505 and you'd be set.
  view full answer...
• What Cigarette Lighter Conversion Kit Do I Need for My Lithium Battery to Power a Rampage Heater?
  If you have the Rampage Radiant Backseat Heater - 300 Watt - 12 Volt # RA3501, you will be able to power the heater by using your lithium battery. This heater will provide you with enough heat that you need for a small cargo van. The universal conversion cigarette lighter cord you need is the Rear View Safety Cigarette Lighter Adapter # RVS-505. This solution will require splicing of your battery's wires. If you need a battery that will provide you with the power you need for your heater,...
  view full answer...
• Can Rear View Safety Backup Camera System Use 12 Volt Cigarette Lighter Plug for Power
  Yes, you can splice the Rear View Safety Cigarette Lighter Adapter # RVS-505 into the power and ground wires of the Rear View Safety SimpleSight Wireless Backup Camera System # RVS-355W to basically create a plug and play connector, instead of splicing directly into your vehicle's wires, which is more permanent. To join the wires, I recommend using heat shrink connectors, like # DW05745-5 because they create the most secure and durable connections.
  view full answer...
• Recommended 12-Volt Powered Light and Cord for Trailer During Loading and Unloading
  I can help you pick out a work light for loading/unloading and help you wire it up to use in a 12-volt outlet. First, I would instead recommend the # TLL48FB Opti-Brite LED Work Light from Optronics instead of the light # TLL50FB you were looking at. This light is much brighter and has a better spread with 1,200 raw lumens of light compared to the 324 raw lumens of light produced by the # TLL50FB. I have linked two images of us testing the two lights at night outside, and you will be...
  view full answer...
  
• Can 12V Cigarrete Style Power Plug Be Added to Jensen LED Television # JTV32DC
  The Jensen LED Television # JTV32DC does not come with a cigarette style plug included, but we have just what you need. You can hardwire # RVS-505 to the power cord for the TV and plug right into a cigarette lighter.
  view full answer...
• Parts Needed to Make 4-Way to Cigarette Lighter Adapter Power Cord
  Since there isn't an adapter pre-made for what you are looking for you'd need to splice the # RVS-505 to a male side 4-way like # W787264.
  view full answer...
• Parts Needed to Make 2-Pole DC to 12V DC Power Plug Adapter
  I have a solution for you, but we do not offer a 3 ft. 2-pole to 12V DC power plug adapter harness. Your only option is to connect 3 of # HM47965 to reach your required length, or to cut off one plug on one of them and use heat shrink connectors # DW05744-10 to join the wire leads to additional 16-gauge wire such as # 16-1-1. You can then simply hardwire the extension leads to the Rear View Safety Cigarette Lighter Adapter # RVS-505 using the same style connectors mentioned above.
  view full answer...
  

Do you have a question about this Accessories and Part?