Roadmaster Stop Light Switch Kit

See what our Experts say about this Roadmaster Tow Bar Braking Systems

• Recommended Tow Bar Wiring and Safety Cables To Flat Tow 2017 GMC Canyon
  Since you already have a tow bar, base plates, and a supplemental braking system for your 2017 GMC Canyon you are most of the way to a complete flat tow setup. Since you mentioned that you are using the Roadmaster Even Brake Portable Supplemental Braking System # RM-9400 you will also need the 12 Volt Outlet Kit # RM-9332, and Roadmaster Stop Light Switch Kit # RM-751472 for your Canyon. The last components you will need are the wiring, and safety cables you mentioned, and likely a high-low...
  view full answer...
• Recommended Flat Towing System for 2017 GMC Canyon Diesel with Custom Fab Fours Premium Front Bumper
  Fab Fours aftermarket bumpers are not rated to flat towed with so you need to find a base late kit that fits with the bumper. The problem is that aftermarket bumpers and base plates often install in the same location and interfere with one another. I've linked our selection of base plates for you to take a look at. I recommend comparing them to the bumper and seeing if any will fit. If they'll all work I recommend the Roadmaster Direct-Connect Kit # RM-523182-5. Our installers generally...
  view full answer...
• Base Plate Kit Fit for a 2019 Chevrolet Colorado ZR2
  Correct, the Blue Ox Base Plate Kit part # BX1721 will fit both the ZR2 and Z71 trim packages on a 2019 Chevrolet Colorado. I have attached an install photo on a 2019 Chevrolet Colorado ZR2 so you can see what it will look like and to confirm fit additionally. I have also attached a list of other parts you will need to complete your flat-towing setup as well if you are interested. Blue Ox Alpha 2 Tow Bar - part # BX7380 Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit - part #...
  view full answer...
  
• Is Demco Coachlink Compatible With Roadmaster Stop Light Switch Kit RM-751472 Item # RM-7
  The Roadmaster Stop Light Switch Kit # RM-751472 will work fine with the Coachlink # SM99945. It doesn't matter which wire you hook the Coachlink up to, you'll just hook one of the black wires on the switch to the red wire on the coach link, and the other black wire on the switch to battery of your vehicle. Lastly you'll hook up the black wire on your Coachlink to ground.
  view full answer...
• Parts Recommendation to Dinghy Tow 2020 Chevrolet Colorado Behind a Motorhome
  Don't stagger, you've got this! To flat tow your 2020 Colorado behind your motorhome, you'll need a tow bar, base plates, safety cables, a wiring solution so the dinghy's taillights work along with those of the motorhome, a supplemental braking system and possibly a high/low adapter. For a tow bar, I really like the Falcon All-Terrain, part # RM-522. The non binding design allows you to release the arms of the tow bar from the vehicle regardless of how level the ground is. The arms are...
  view full answer...
  
• Is There A Plug-And-Play Brake Controller Wire Harness For A 2018 GMC Canyon
  There is not a plug-and-play style connector for an aftermarket brake controller for a 2018 GMC Canyon so you would have to splice into the factory wiring. You'll need to look for the cold side of the brake light switch by checking the wires coming off of the brake pedal with a tester # PTW2993. The wire that lights up only when the brake pedal is depressed is your brake light switch wire. If you can't find it or the wire is too thin of a gauge to splice into then you can use the Roadmaster...
  view full answer...
• Items Needed for Flat Towing 2020 Chevy Colorado Behind Motorhome
  In order to flat tow your 2020 Chevy Colorado behind a motorhome, you'll need the following items: -A towbar, such as the easy to use Roadmaster Falcon All-Terrain, # RM-522 -Base Plates, like # 523182-5 which fits all models except Trail Boss, Z71 or ZR2 Bison and models with Adaptive Cruise Control. -Safety Cables, # RM-643 -Diode Wiring Kit, part # RM-15267 -A Supplemental Braking System like the # RM-9400 -Stop Light Switch # RM-751472 -12V Outlet Kit # RM-9332 And possibly a high/low...
  view full answer...
• Recommended Flat Towing Set Up for a 2019 Chevy Colorado
  I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights item # RM-676 Roadmaster Direct-Connect Base Plate Kit item # RM-523182-5 Roadmaster Battery Disconnect with Switch item # RM-766 Demco SBS Stay-IN-Play DUO Supplemental Braking System item # SM99251 Roadmaster Stop Light Switch...
  view full answer...
• Estimated Time to Install Roadmaster Base Plates on 2018 Chevy Colorado
  I checked with Roadmaster, and they estimate Roadmaster Direct-Connect Base Plate Kit # RM-523182-5 that fits a 2018 Chevy Colorado (without Adaptive Cruise Control) is approximately three hours. I have added a link to a video install of this kit on an '18 Colorado as well as the installation instructions for you to take a look at. Along with these base plates, the other parts I recommend for your 2018 Colorado so you can flat tow it are: - Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding...
  view full answer...
  
• How to Flat Tow a 2016 Chevy Colorado With 4WD
  I took a look at the owner's manual of a 2016 Chevy Colorado and a four wheel drive model can be towed so long as it has a N (neutral) and Four-Wheel Drive Low setting. There are a number of parts you're going to need in order to do this, starting with compatible base plates. I recommend the Blue Ox # BLU93FR. For a tow bar I recommend going with the Blue Ox Alpha # BX7380 because of how easy the tow bar is to connect to the base plates, the long arms that make it easier to maneuver when...
  view full answer...
• Is A Brake Pressure Reducer Needed On A 2017 GMC Canyon?
  No, the RoadMaster Brake Pressure Reducer for BrakeMaster Supplemental Braking System # RM-900002 is not needed for your 2017 GMC Canyon. The brake pressure reducer is needed for vehicles that have active, or continuous power assist systems that are present on Hummer's or Hybrid's. With the Roadmaster BrakeMaster # RM-9160, you will also need a Roadmaster Stop Light Switch Kit # RM-751472, and the Roadmaster BrakeMaster Custom Seat Adapter # RM-88315
  view full answer...
• What's The Difference Between The Roadmaster Baseplate Kit # RM27MR And # RM37VR
  The difference between the Roadmaster Baseplate Kit # RM37VR and # RM27MR is that the # RM37VR will not fit AT4 models and the # RM27MR is designed to fit AT4 models. You'll just need to choose the corresponding option for your specific model. If you haven't picked out the rest of your flat towing components then I have the following recommendations: Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR. This tow bar comes with safety cables bracketed...
  view full answer...
• Best Parts to Flat Tow a 2022 GMC Canyon
  For a complete flat towing setup on your 2022 GMC Canyon you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. I recommend the following: Direct-Connect Base Plate Kit - # RM37VR Nighthawk All Terrain Tow Bar w/ LED Lights - # RM-676 Combo Kit - # RM-9284-2 Battery Disconnect - # RM-766 (if you don't have a diesel or dual battery model) InvisiBrake Braking System - # RM-8700 Stop Light Switch - #...
  view full answer...
• Recommened Base Plates and Flat Towing Accessories for 2015 Chevy Colorado
  As long as your Colorado doesn't have the radar-based adaptive cruise control option, Roadmaster does offer base plates for your truck. The Roadmaster EZ4 base plates, part # RM-523182-4 is compatible with your Stowmaster tow bar. The base plate is a fit for 2 or 4WD vehicles. You'll also need safety cables like # RM-643 if you don't have them already. For wiring up the taillights, I'd recommend the Roadmaster bulb and socket kit, part # RM-155. This will provide a permanent lighting...
  view full answer...
• Can the Automatic Battery Disconnect Be Used On a 2019 GMC Canyon Diesel
  I do have an option for you but the Roadmaster Automatic Battery Disconnect part # RM-766 will not work on any vehicle with a diesel engine no matter the number of batteries due to power surges. Instead, you can use the Deka Lead Quick-Disconnect Battery Terminal part # DW05312 or you can use the Epicord Battery Disconnect Switch with Key part # 277-000096 and mount it inside the vehicle. I have attached some other items you will need to flat-tow a 2019 GMC Canyon below. Roadmaster Direct-Connect...
  view full answer...
• Comparing The Blue Ox And Curt Baseplate For A 2021 GMC Canyon
  The Curt Custom Base Plate Kit # C88FR is going to sit higher than the Blue Ox # BLU93FR, as well as all of the other options available so it's really going to come down to your personal preference and the brand of tow bar you chose. Both the Blue Ox and Curt baseplates are going to be compatible with Blue Ox tow bars so the Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380 you purchased will be compatible with both. I personally prefer the Blue Ox since it sits lower and would look better with...
  view full answer...
• Recommended Parts for Flat Towing a 2022 Chevy Colorado
  The parts I recommend for flat towing your 2022 Chevy Colorado behind your Class C are listed below. Please keep in mind that you can only flat tow a 4WD version of this vehicle according to the owner's manual. Flat Tow Parts Direct-Connect Base Plate Kit - Basic Z71 # RM37VR, ZR2 #RM78VR, or ZR2 Bison # RM33VR Nighthawk All Terrain Tow Bar - # RM-676 Towing Combo Kit - # RM-9284-2 Auto Battery Disconnect - # RM-766 Stay-IN-Play DUO Brake System - # DM86VR Brake Light Switch Kit - # RM-751472 High-Low...
  view full answer...
• Can a 2019 Chevrolet Colorado 4x4 Be Flat-Towed
  Yes, a 2019 Chevrolet Colorado 4x4 is flat-towable with all four wheels down. It looks like all models come with the 2-speed transfer case which is needed to be flat-towed so you should not have any issues. I have attached a list of parts for you below that you will need to complete your setup. Roadmaster Direct-Connect Base Plate Kit - part # RM-523182-5 Roadmaster Nighthawk All Terrain Tow Bar - part # RM-676 Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit - part # RM-15267 Roadmaster...
  view full answer...
  
• Parts Needed to Flat Tow 2022 Chevy Colorado ZR2 Behind Motorhome
  We'd be happy to help with that. As long as your Colorado has a transfer case that has a Neutral and a 4 wheel low position, it can indeed be flat towed. For base plates, I'd recommend the Roadmaster Direct Connect base plate kit, part # RM78VR which Roadmaster confirms is compatible with the ZR2 package. For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain tow bar, part # RM-522. You'll also need # RM-643 safety cables. To wire the taillights, use the # RM-152-98146-7 diode...
  view full answer...
• Is the Stop Light Switch Kit Needed When Installing the InvisiBrake on a 2017 Chevrolet Colorado
  If you are installing the Roadmaster InvisiBrake # RM-8700 on your 2017 Chevrolet Colorado then you will need the Stop Light Switch Kit # RM-751472 if you have adjustable pedals instead of part # RM-751452. The part you referenced is for a Jeep but the kit # RM-751472 is for your Colorado.
  view full answer...
• Flat Towing a 2018 GMC Canyon 6 Speed Manual Transmission
  A 2018 GMC Canyon with 6 speed manual transmission can be flat towed only if you disconnect the drive shaft. You will need a drive shaft coupling for this application which unfortunately we don't sell but I can email you information on who can help. If you use the drive shaft coupling, then you can use the following parts to flat tow: Roadmaster EZ5 Base Plate Kit - Removable Arms # RM-523182-5 Roadmaster Falcon 2 Tow Bar # RM-520 RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000...
  view full answer...
• Flat-Towing Setup for a 2018 Chevrolet Colorado ZR2
  Before you purchase the necessary components needed to flat-tow your 2018 Chevrolet Colorado ZR2 behind your 2014 Tiffin Allegro Open Road 36LA you will want to review the "Recreational Towing" section of your owner's manual for any special clauses. In order to flat-tow your Colorado you will need a base plate kit, tow bar, supplemental braking system, safety cables, tow bar wiring, and a possible high-low adapter. The only base plate kit we have for your Colorado with the ZR2 package...
  view full answer...
• Base Plate Kit Compatibility With A 2016 Chevrolet Colorado Z71
  I do have a base plate kit that is compatible with your 2016 Chevrolet Colorado Z71 Trail Boss but the Roadmaster EZ5 Base Plate Kit part # RM-523182-5 is not a confirmed fit for the Z71 Trail Boss package. For a base plate kit that is compatible with your vehicle, I recommend using the Blue Ox Base Plate Kit part # BX1721 as this is the only base plate kit we have list as a fit with the Z71 and Trail Boss packages. We also have an installation video of this kit installed on a 2015 Chevrolet...
  view full answer...
• Brake Light Switch for LED Indicator of Supplemental Braking System
  The part you are describing for your 2016 Chevy Colorado is the Roadmaster Stop Light Switch Kit # RM-751472. I've attached a video to assist as well as the installation instructions.
  view full answer...

Do you have a question about this Tow Bar Braking System?