Replacement Split Bushing for Roadmaster Anti-Sway Bars with 1-5/8" Diameter Bars

Video Transcript for Review of Roadmaster Replacement Split Bushing 1-5/8 Inch Anti Sway Bar - RM-205212-10

Hi, everybody, Andy here with etrailer.com. Let's take a real quick look together at this Roadmaster replacement split bushing. This is going to replace one split polyurethane bushing for your Roadmaster anti-sway bar with a diameter of 1 5/8 inches. And as you probably know, polyurethane is durable. It's resistant to damage caused by oil, gasoline, and ozone. So it's flexible, yet durable.

And so this is going to ensure that the system is either so rigid nor so malleable, malleable that it's gonna become ineffective. And as you can see, this is a split bushing. So this is going to allow you to open this up and put it in place on your sway bar precisely where you need it. So no, pushing it all the way down the bar into place is necessary since this is a split bushing. And again, this is going to fit over your bar with the diameter of 1 5/8 inches.

Lemme go over some other measurements with you, looking at the height, in case you're interested, we are sitting right at 2 7/8 inches, lining that ruler up there, 2 7/8 inches. And then looking at the width, we're sitting right at about 3 1/4 inches. And then looking at the length, looks like we're sitting right at 3 7/8 inches long. And this bushing is directly from Roadmaster. So what that means for you is, you can have the confidence that this is going to work without any issues, without any problems, with your Roadmaster anti-sway bar with the diameter of 1 5/8 inches.

Well, I think that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.