Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Front Anti-Sway Bar

Video Transcript for Review of Roadmaster Replacement Polyurethane Bushing Kit - RM46ZR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Roadmaster Replacement Polyurethane Bushing Kit. Now, this kit is going to replace the polyester split bushings needed for your Roadmaster 1 1/2 inch diameter factory front anti-sway bar, as you can see on the screen there. So if those bushings have begun to wear out or your finding it that they're not as effective as they used to be, these are gonna be the exact replacements from Roadmaster that you need to replace those originals. So you are going to get two of these polyurethane split bushings, very easy to switch out in place of the originals. You'll also get two bushing clamps in case the originals need to be replaced.

You'll get to split collars, some Aqua lube, and of course, directions on how to switch these out from the original. So if your original bushings are not quite holding up anymore, or for whatever reason, you've decided that you need to replace those, these are going to be the direct replacements from Roadmaster, so you can trust they are gonna fit with your sway bar, you're not gonna have to worry about fit issues, compatibility problems, or anything like that, it's gonna be exactly what you need. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..