Dimensions of the Replacement Split Bushing # RM-205212-10

Question

Question:

What are the dimensions of this part?

asked by: Jerry F

0

Expert Reply:

The Replacement Split Bushing # RM-205212-10 that you referenced is a fit for the Roadmaster anti-sway bars with 1-5/8" diameter bars and has the following dimensions:

Bar Diameter - 1-5/8"
Height - 2-7/8"
Length - 3-7/8"
Width - 3-1/4"

I have attached a photo for you to use as a reference as well.

expert reply by: Jon G

0

Dimensions of Replacement Split Bushing for Roadmaster Anti-Sway Bars with 1-5/8" Diameter Bars
(click to enlarge)

Answer 1

Yes we do carry the replacement bushing for the Roadmaster Swaybar part #RM-1149-106 that you referenced. For that you would want the part #RM-205212-10.

view full answer...

Answer 2

Assuming that you're needing the steel U-clamp and replacement bushing for a Roadmaster #RM-1259-105 front anti-sway bar installed on your motorhome built on a 2003 Workhorse W22 Chassis, the replacement U-strap is part #RM-B141 and the…

view full answer...

Answer 3

The Roadmaster Replacement Bracket U Clamp for RM Front Sway Bar 1139-140 #RM-B141 measures 4 inches center of bolt hole to center of bolt hole, 5-1/2 inched end to end, 3 inches top to bottom, 1.975 inches inside, and the bolt hole measures 0.74…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 9

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Dimensions of the Replacement Split Bushing # RM-205212-10

Product Page this Question was Asked From

Continue Researching