Roadmaster Polyurethane Bushing Kit for 1-3/4" Diameter, Factory Rear Anti-Sway Bar

See what our Experts say about this Roadmaster Accessories and Parts

• Front Anti-Sway Bar Bushing Kit for a 1995 Chevy P30 Chassis
  For the 1-1/4 inch factory front anti-sway bar on the 1995 Chevy P30 chassis you can use Roadmaster Polyurethane Bushing Kit # RM-4109-109. If you wanted to replace the factory front sway bar with a beefier, more effective model you can use # RM-1109-116. Please note: Product RM-1109-116 intended for vehicles with coil spring independent suspension; does not work for widebody models.
  view full answer...
• Which Bushings to Replace Bushings on Roadmaster 1-3/4 Inch Anti-Sway Bar
  It sounds like you're looking for the Replacement Bushing for Roadmaster Front Anti-Sway Bar for Motor Homes - Qty 1 # RM-205393-00, which you'll need 8 of. For the bushings that fit around the bar you'll need the Roadmaster Polyurethane Bushing Kit for 1-3/4" Diameter, Factory Rear Anti-Sway Bar # RM-4109-106 for a complete set with mounting hardware.
  view full answer...
• Replacement Bushings Available for Roadmaster Sway Bar # RM-1209-136
  If you are looking for the bushings that fit around the sway bar part # RM-1209-136 which is 1-3/4 inch in diameter you'd need the part # RM-4109-106 for a kit that includes hardware to install it. If instead you are looking for the smaller end link bushings you'd need the part # RM-205393-00 instead which are sold individually.
  view full answer...
• Steering Stabilizer and Front/Rear Anti-Sway Bars for a 1995 Georgie Boy on Chevy P30 Chassis
  The steering stabilizer that you need for your 1995 Georgie Boy Cruisemaster on a Chevrolet P30 Chassis is the Roadmaster part # RM-RBK3-RSSP30. We don't necessarily have replacement OEM rear sway bar bushing, but we do have the Roadmaster Bushing Kit # RM-4109-106 which is an upgrade to your current system. The front anti-sway bar that I recommend is the Roadmaster # RM-1109-116 which has a 1-5/8" diameter and replaces the factory sway bar. Some review videos and installation details...
  view full answer...
• Replacement Polyurethane Bushing Kit For 1-3/4" Diameter Sway Bars
  It sounds like you are needing the Roadmaster Polyurethane Bushing Kit # RM-4109-106. This includes bushings for a 1-3/4" factory sway bar.
  view full answer...
• Recommended Bushing Kit and Front Anti-Sway Bar for a 1998 Fleetwood Bounder
  According to Roadmaster, there actually isn't a steering stabilizer available for your 1998 Fleetwood Bounder. They do still make a front sway bar that you could use, however. If you're interested, you're going to want the Roadmaster Front Anti-Sway Bar and Bushing Kit # RM-1109-116. For the bushing kits, Roadmaster offers two depending on the thickness of your factory front and rear sway bars. Obviously if you decide to use the front anti-sway bar mentioned above you wouldn't need to...
  view full answer...
• What Are The Best Stabilizer Options For A 1994 Chevrolet P-30 Series
  You are correct, the 1994 Chevrolet P-Series Chassis came with both two wheel drive front coil spring suspension and four wheel drive front leaf spring suspension setups. Fortunately, we have stabilizer and sway control options for both models. For your coil spring suspension, I recommend using both a front steering stabilizer and rear axle stabilizer. For the front steering stabilizer, I recommend using the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Motor Homes...
  view full answer...
• What is The Mounting Hole Size and Spread On The Roadmaster Polyurethane Bushing Kit # RM-4109-106?
  The bolt holes for the Roadmaster Polyurethane Bushing Kit # RM-4109-106 are spread 3.3" with the slots being 1/2" wide and 3/4" long.
  view full answer...

Do you have a question about this Accessories and Part?