Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick

See what our Experts say about this Roadmaster Base Plates

• Compatibility of etrailer Brand SD Tow Bar With D-Ring Bumper on Jeep Wrangler
  The Roadmaster or Blue Ox D-Ring adapters haven't been tested with the etrailer brand # e24ZR tow bar, so the manufacturer can't speak to the compatibility. I'd recommend going with a tow bar and D-ring adapter with known compatibility, like the Roadmaster Falcon All-Terrain tow bar, part # RM-522. For a D-ring adapter, use # RM-035 for 3/4 inch thick D-ring mounts or # RM-035-1 for 7/8 or 1 inch thick D-ring mounts. Before using the D-rings on an aftermarket bumper for towing purposes,...
  view full answer...
• Parts Needed to Flat Tow a 2003 Jeep Wrangler
  In order to flat tow your 2003 Jeep Wrangler there are a number of parts you'll need, including a tow bar. The first thing you need to get are base plates for the Wrangler, and that will depend on the type of bumper you have. For example # RM-035-1 if you have 1 inch D-Ring bumper mounts or # RM-521424-4 if you have a Double Tube bumper. I have added a link to our page with the base plates that work with a 2003 Wrangler so you can find the one that works for you. The tow bar you need,...
  view full answer...
• Recommended Flat Towing Set Up for a 2005 Jeep Wrangler TJ
  I would be happy to help you. You will want to verify that your bumper is capable of being flat towed with first. If you have 1" D-Rings you will need the Item # RM-035-1. If your D-rings are 3/4" wide you will want item # RM-035. I have listed the rest of the parts you will need to flat tow your 2005 Jeep Wrangler TJ along with any installation videos we may have. Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Wiring Harness - Roadmaster Diode...
  view full answer...
• Flat Towing Recommendations For A 2015 Jeep Wrangler Unlimited Sahara With Quadratec Bumper
  I spoke with Quadratec and was able to confirm that your Qaudratec Bumper #12057.0210 is rated to flat tow. You'll be able to use the the Roadmaster D-ring mount adapters and tow from your D-ring mounts instead of a lengthy base plate install that would require you to alter or remove your bumper. If your mounts are 1" thick you'll want the # RM-035-1 or for 3/4" thick mounts the # RM-035. You'll also need a tow bar, tow bar wiring kit, braking system, and safety cables. I have the following...
  view full answer...
  
• Wiring Kit for the Nighthawk All Terrain Tow Bar to Flat Tow a 2018 Jeep Jk Wrangler Unlimited
  To complete the wiring kit included for your 2018 Jeep JK Wrangler Unlimited when using the Roadmaster Nighthawk All Terrain # RM-676 tow bar I recommend going with the All Terrain Towing Combo Kit # RM-9284-2. This includes the wiring and diodes needed to complete the wiring as well as a cover and locks for your Nighthawk All Terrain, silicone rv lube, and a storage bag for keeping all of your loose flat towing components in one place when they are in storage. If you would rather just...
  view full answer...
• Jeep D-Ring Adapter Recommendation for 1 inch Thick D-Ring with 7/8 inch Diameter Hole
  Based on what you listed the correct Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars is the part # RM-035-1 which fits D-ring adapters that are 1 inch thick and also comes with sleeve fittings to also fit a 7/8 inch diameter hole.
  view full answer...
• Compatible D-Ring Adapter For Flat Towing Jeep With Smittybilt Bumper With Falcon 2 Tow Bar
  It is possible for you to use the D-rings on your 2015 Jeep Wrangler bumper with the Roadmaster Falcon 2 Tow bar part # RM-520 with the adapter part # RM-035-1 if your D-rings are 1" thick or part # RM-035 if your D-rings are 3/4" thick. I have attached a couple very helpful video for your reference. Please keep in mind your aftermarket bumper does need to be rated for flat towing. According to Roadmaster, Smittybilt is the only aftermarket bumper manufacturer that they know of that approves...
  view full answer...
  
• Tow Bar that Can Be Used with Roadmaster D-Ring Adapter # RM-035-1
  We do have similar tow bars that can attach to the Roadmaster D-ring adapter part # RM-035-1 you referenced but the Curt # C19745 will not attach. You'd have to go with a motorhome mounted tow bar like the Falcon 2 part # RM-525.
  view full answer...
• Fit of Roadmaster Adapter for Jeep D-Ring Bumper Mounts
  There isn't a minimum or a maximum. The # RM-035 Adapter for Jeep D-Ring Bumper Mounts doesn't use the D-rings themselves, they attach to the shackle mounts that the D-rings attach to. You'll also want to find the diameter of the pin hole. The # RM-035 adapter is designed for shackle mounts that are 3/4 inches thick and pin holes that are 7/8 or one inch in diameter. The # RM-035-1 is for 1 inch thick shackle mounts and 7/8 or one inch diameter pin holes. Before using adapters such as...
  view full answer...
• Recommended Flat Towing Set Up For A 2021 Jeep Wrangler Unlimited With An Off-Road Bumper
  We definitely have what you need to get your 2021 Jeep Wrangler Unlimited all set up to be flat towed. Knowing you have an off-road bumper with the 1" D-Rings actually does help quite a bit and allows you to use the Roadmaster Adapter for Jeep D-Ring Bumper Mounts # RM-035-1 instead of a traditional base plate, so that's a huge plus. These will replace the attachments at the ends of the arms on the Roadmaster Falcon All Terrain Tow Bar # RM-522 and get you connected in no time flat. The...
  view full answer...
• What Tow Bar is Roadmaster Base Plate to Tow Ready Towbar Adapter Compatible With
  The Roadmaster Base Plate to Tow Ready Towbar Adapter and Replacement Crossbar for Tracker Towbar # RM-025 is not compatible with the Roadmaster Falcon 2 Tow Bar # RM-520. It is a replacement for the Roadmaster Tracker tow bar RM-020 and compatible with Draw-Tite 2480, Reese 74950, Valley, EAZ-Lift and Tow Ready 63180 tow bars. It also requires base plates, and can't just use this on a bumper as it not only wouldn't work, it absolutely wouldn't be safe. Base plates are required for almost...
  view full answer...
• Roadmaster Adapter Recommendation for Connecting Sterling Tow Bar to D-Rings of Aftermarket Bumper
  Before you order that front bumper you should check with the manufacturer to make sure you can flat tow the vehicle using the D-rings on the front of it. If so you should then ask what the thickness of the D-rings is. If they are 3/4 inch then the Roadmaster D-Ring adapter part # RM-035 would be what you'd need. If they are 1 inch thick instead you'd want the part # RM-035-1. I can't post the picture you send up due to copyright issues but judging by the location of them they should work...
  view full answer...
• Availabilty of D-Ring Adapters for Bumper on 2017 Wrangle Unlimited
  We don't offer a D-ring adapter for the etrailer brand # e94ZR tow bar, but we do have an option that will work with a Roadmaster Tow Bar like # RM-576 Sterling All-Terrain for an 8K capacity or the Blackhawk # RM-422. You'd need adapters like # RM-035-1 for 1 inch thick rings or # RM-035 for 3/4 inch thick D rings.
  view full answer...
• Parts Needed To Flat Tow 2020 Jeep Wrangler Unlimited with Aftermarket Bumper and Diesel Motorhome
  In order to flat-tow a 2020 Jeep Wrangler Unlimited you'll indeed need a tow bar, base plate kit, tail light wiring, braking system, and safety cables. In regards to the base plate kit, these are designed for the factory bumpers and in which case you would use the Roadmaster Direct-Connect Base Plate Kit part # RM-521453-5. If you have an aftermarket bumper then you will want to use d-rings (if equipped), the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars...
  view full answer...
• Is There A Recommended Bumper For Flat Towing A 2001 Jeep Wrangler
  We don't carry replacement front bumpers, but you could check with Smittybilt since they do offer some bumpers that are rated for flat towing by the D-Ring mounts. This will give you a more rugged looking bumper for your Wrangler without having to install a baseplate. When you're picking out the bumper you'll want to note the thickness of the D-Rings to ensure that we have a compatible adapter to connect to a tow bar. We have the following options: Roadmaster: 3/4" Thick # RM-035 1" Thick...
  view full answer...
• Base Plate Kit Adapter that Works on D-Rings on Front of Jeep Bumper
  By C plate do you possibly mean D-rings like what are very common on front of Wrangler bumpers? For that we have Roadmaster D-Ring adapters like the part # RM-035 if they are 3/4 inch thick and also the part # RM-035-1 for if they are 1 inch thick. These require a Roadmaster tow bar like the # RM-520.
  view full answer...
• Can Roadmaster Tow Bar Connect to Jeep Wrangler with D-Rings on Off Road Bumper
  Roadmaster has D-Ring adapters for their base plate kits like with the # RM-035 for a 3/4 inch thick D-ring, part # RM65FR for a 1 inch D-ring adapter that is extended or the part # RM-035-1 for a 1 inch thick D-ring standard length. This would work great with any of their coupler mounted base plate kits like the # RM-520.
  view full answer...
• Recommended Jeep D-Ring Bumper Mounts for a Roadmaster 5250 Tow Bar
  Yes, there are a couple of adapters that will work with the Roadmaster Falcon 5250 tow bar and connect to the welded rings on your aftermarket bumper. For 1" rings you will want the Adapter for Jeep D-Ring Bumper Mounts item # RM-035-1. For 3/4" rings you will want the Adapter for Jeep D-Ring Bumper Mounts item # RM-035. You will want to confirm your bumper is rated to be flat towed with. I have listed some other parts you will need to flat tow your 2015 Jeep Wrangler Unlimited below. Tow...
  view full answer...
• Diameter of Holes Tow Bar Attaches to on Adapter for Jeep D-Ring Bumper Mounts RM-035-1
  I was able to find the diameter of the hole where the tow bar attaches to for the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035-1. As you can see by the accompanying diagram, the holes are 1 inch in diameter. I have added a link below to a video review for you to check out as well of the Adapter for Jeep D-Ring Bumper Mounts # RM-035-1.
  view full answer...
  
• Parts Needed to Flat Tow a 1993 Isuzu Trooper RS with Jeep DV8 Front Bumper Installed
  Do you know the diameter of the holes on the D-Ring mounts that are on the bumper? If so then you could use Blue Ox adapter such as # BX88296 for 7/8 inch diameter if that is the hole size. There are also options for 3/4 inch D-Rings # RM-035 or 1 inch rings # RM-035-1 but you would then have to use a Roadmaster tow bar such as the Falcon 2 # RM-520. If you go with the Roadmaster set up then the tow bar does not come with safety cables like the Blue Ox Aventa LX does. So for safety cables...
  view full answer...
• Compatible Baseplate Adapter For An 07' Toyota FJ Cruiser With Fab Fours Aftermarket Bumper
  The Roadmaster Direct-Connect Base Plate Kit - Fixed Arms Item # 1437-3 will connect to your Roadmaster Falcon 5250 tow bar but they were specifically designed for 2007-2010 Jeeps with a Rugged Ridge XHD bumper. I spoke with a Roadmaster tech and another option is to first ensure your bumper is capable of towing your vehicle and then use a D-Ring Adapter like the D-Ring Bumper Mounts to Roadmaster Tow Bars - 1" Thick Item # RM-035-1 or D-Ring Bumper Mounts to Roadmaster Tow Bars - 3/4"...
  view full answer...
• Parts Needed to Flat Tow a 2017 Jeep Wrangler Unlimited with the Even Brake System # RM-9400
  The parts needed to flat tow your 2017 Jeep Wrangler Unlimited include a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Since you have D-Rings on your front bumper you will need an adapter like part # RM-035 or part # RM-035-1 for 3/4" or 1" thick D-Rings respectively. These allow you to then use a tow bar like the recommended Falcon All Terrain # RM-522 that features a non-binding design and safety cables...
  view full answer...
• How Can I Flat Tow My 2009 Jeep Wrangler That Has An Aftermarket Bumper
  The etrailer SD Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs, part # e34ZR, does not attach directly to an aftermarket bumper. You will need to confirm with the manufacturer of the bumper to see if is rated for flat towing. If so, then we would look into the base plate for your 2009 Jeep Wrangler. You can always go with a different tow bar. The Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs, part # RM-522, can be paired with Roadmaster...
  view full answer...
• Inside Diameter Of Roadmaster Adapter For Jeep D-Ring Bumper Mount RM-035-1
  I had our warehouse measure the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1 and the inside diameter of the adapter sleeve that fits the Roadmaster tow bar is 1" as shown included diagram. The # RM-035-1 is confirmed to fit your 2018 Jeep Wrangler JK as long as it has an off-road bumper with 1" D-ring mounts and will allow you to use any Roadmaster motorhome mount tow bar like the Roadmaster Falcon All-Terrain Tow Bar # RM-522 you...
  view full answer...
  

Do you have a question about this Base Plate?