Solera RV Slide-Out Awning - 169" Wide - Black
(1098 reviews)
Price: $601.13
In Stock
Solera RV Slide-Out Awning - 169" Wide - Black
Item # LCV000168112
Retail:$913.37
Our Price: $601.13
You Save: $312.24
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1098)
- Q & A (0)
- Photos
Lippert RV Awnings - LCV000168112
- Slide-Out Awnings
- 164 Inch Wide
- 165 Inch Wide
- 166 Inch Wide
- 167 Inch Wide
- 168 Inch Wide
- 169 Inch Wide
- Black
- Extends 48 Inches
- Lippert
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 14'1" from edge to edge. Includes all necessary components.
Features:
- Protects your RV slide-out from damage from clogging leaves, debris, and pooling water
- Prevents water damage and mildew
- Blocks out sun to help keep the RV cool
- Extends and retracts with your slide-out automatically
- Made of heavy-duty, durable fabric with premium 13.5-oz vinyl
- Won't crack in cold temperatures
- Prevents leaks with heat-welded seams
- Includes brackets, hardware, and awning rail
- Black awning fabric matches black hardware
- Made in the USA
Specs:
- Application: slide-outs 164" - 169" wide with 48" extension
- Minimum 7" of clearance needed on both sides of the slide-out - order next size down if needed
- 2 Slide-outs next to each other need 14" total clearance between them
- Awning dimensions:
- Awning rail: 169" long
- Awning fabric (when fully extended): 169" wide x 48" long
- Bolt hole diameter: 3/16"
- Mounting bracket dimensions: see below
- 1-Year warranty
How to Measure for an RV Slide-Out Awning
To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you don't have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage.
If there are two slide-outs next to each other, you will need a total of 14" of clearance between them for them both to have a slide-out awning. Again, you can go down a size if you are low on space.
Protect Your RV Slide-Out
Without a slide-topper, the roof of your slide-out room is continually exposed and can accumulate leaves and bugs and different types of debris. That debris can build up along the rubber strip at the top of your box, preventing a firm seal when your slide-out is retracted. Rain water can then get in and pool on the top of your slide-out. If you don't clear the water off each time it rains, mold can begin to form. And when your slide-out is pulled in, that mold gets inside your RV.
The Solera RV slide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out. Not only does it prevent debris from collecting on the roof of your slide-out, but it keeps water from pooling and potentially causing damage down the road. Because it mounts directly to the front of the slide box, the slide-out awning is able to automatically extend and retract every time the slide-out room is extended or retracted.
Durable Vinyl Fabric
The durable awning fabric holds up to the rigors of the outdoors. It's made of premium 13.5-oz vinyl, which is an upgrade over the 10-oz fabric used in many awnings. This fabric also features heat-welded seams to prevent leaks. And it is made to withstand cold temperatures down to -25 degrees Fahrenheit, so it won't crack or degrade during the winter.
Simple Installation
Use the self-tapping screws to secure the included access plate to the side of your slide-out, positioning the plate at the bottom of the T-molding. The two access brackets slide easily onto the access plate's track. The rods that are located at each end of the roller tube, which comes with the awning fabric already mounted, slide through the hole in the two access brackets.
The included awning rail is used to anchor the other side of the fabric to your RV. This rail can be mounted up to 5" above the trim on top of your slide box.
Note: It's important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.
V000168112 Lippert Solera 14'1" Slider (Slide-Topper) in Black w/ Black Hardware
Installation Details
California residents: click here
Customer Satisfaction Score:
82% were satisfied with this product
18% of customers were not satisfied
Customer Reviews
Solera RV Slide-Out Awning - 169" Wide - Black - LCV000168112
Average Customer Rating: 4.6 out of 5 stars (1098 Customer Reviews)
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 14'1" from edge to edge. Includes all necessary components.by: Bonnie 11/09/2023
These slide out awnings are awesome. I love mine
by: Mark08/05/2020
The installation was straightforward. The only issue I ran into in the instructions was there was very little about removing the retaining pin for the springs. Other than that, this unit was installed in one hour.
by: Lloyd08/04/2023
My package was damaged I didn’t sign for it hope to get a replacement soon
by: Larry08/31/2023
The 85" owning rail is damaged. I have attached some photos.
Jenny N.
9/6/2023
It definitely took a tumble. Customer Service will be in contact so that we have this taken care of for you.
by: Paul 11/25/2023
Watched installation video. Easy instal lation!
by: Kris08/02/2023
Dont blame ET for it but Every slide topper i order comes in destroyed and my customers have to wait months. Amazon here in two days perfect. the shipper does not care to take care of the products here
by: Mark 07/05/2023
Slide cover works great. Etrailer was very helpful when I ordered.
by: Larry 11/30/2020
I have ordered various items from etrailer over the past few years. The customer service is always unbelievably excellent. Thanks Montrell and Derek! This Solara slide topper replaced a broken Dometic topper on our motor home. Installation was easy and straight forward. The hardware was top quality and instructions were easy to follow. The topper arrived in a heavy cardboard tube that could have withstood being run over by a truck. Extremely Happy Thanks etrailer.
Larry Y.
12/24/2021
Awning is still working perfectly after installing over a year ago.
by: Larry 11/15/2022
Very easy installation, but definitely a two person job with the longer ones. The longer the cover the more it will sag on it's own. No fault of anyone....Just the shear weight of itself will cause it to sag. Be prepared to run your slides in, and back out, after a rain in order to dump pooled water or devise a way to support it underneath. I currently have my thinking cap on.
by: Mike06/26/2023
Got one done today it went pretty good. The awning is working great.
by: Randall03/01/2022
2019 3811ms Montana. These were easy to install, and all three went up in one day. No more worries of water standing or leaves when closing up trailer. I highly recommend this product! Had one issue with a damaged awning when it arrived, etrailer was very helpful and had a new one sent out promptly.
by: Tanya02/09/2022
Awning mechanism almost fell off pole. Luckily caught it time and fixed problem. Awing itself is great.
by: 04/18/2024
by: Glenn 02/26/2021
by: Jimmie04/23/2023
Carol, I wanted to send you photos of how I received my two packages from the freight company. Y'all have been great to deal with but the delivery method needs improving. As long as my awnings are not missing any parts and are not damaged, I will be happy. But I just got back home and found the boxes like this. I thought you would want to know.
by: Robert03/13/2024
This awning was packaged well and it arrived undamaged, however, when I took it out of the package the top rail was bent and the groove where the awning slides in was damaged. I was able to open the groove by bending and it was still serviceable. The hardware package had been opened previously, but nothing was missing. On the bead end of the vinyl where it is glued together was not glued properly. It was on the leading end of the awning so it would take a beating while driving. I repaired it with super glue and hopefully it will hold properly. Those are my complaints and why I gave it only 3 stars. On the other hand, the instructions were thorough and easy to follow. The hardware installation was straight forward and was completed without issue.
I have purchased from etrailer for years and have been very satisfied with the service and quality of their products. This one didn’t measure up due to the factors above.
by: Ryan05/30/2022
Perfect fit for my Coachmen Clipper 17BHS slide out. Install was easy with the etrailer install video! They cover every step in the video and explain assembly better than the supplied instructions. Works great at keeping out the leaves, hoping it works to help keep water out of the slide out seams too.
by: Hansen48902/09/2023
I purchased a total of 5 slide toppers for my Grand Design Solitude 390RK. After a year of use I love them. No more climbing on the roof to clean off the slide outs before retracting them. Very little flapping and only in very strong winds. Had one person helping to install 3 of them, 2 I installed by myself. It wasn't that hard. Took a little over an hour to install each one. Saved hundreds of dollars by doing it myself. Would definitely buy them and install them again again. Had very fast and good service from etrailer.
by: Mitch12/29/2023
Product was destroyed in transit. Please refund my money. I will not be interested in further negotiations with e trailer. It seems to be a systematic issue with your choice of transportation vendor. Best wishes.
by: GR07/10/2023
I am not sure whose fault it was, but it took about 3 months for my order to be completed. It was backordered initially, which is fine, but somehow shipped two weeks early. I get ready to install and realize the awning rail, and half of the screws are missing. It appeared to be an open box item, or maybe items taken, and sent to another customer. Customer service was great, (through the whole process, keeping me informed) and they requested the missing parts, which were also back ordered. Two months later, the parts become available and they ship me another slide topper, with the awning rail, but missing all of the screws again!!!! This required another order to be placed for the screws, which took almost two weeks to arrive. I then needed to return the extra awning with the freight company, which was aggravating because they kept canceling/rescheduling dates. Finally got it all installed which took about an hour. The slide topper looks great now that it’s finally installed!
by: Cecil08/01/2023
Your choice of LTL carrier is poor at best. They arrived a week later than what they originally scheduled. All 3 packing tubes that the slide toppers were shipped in were damaged. Off loading and inspecting was a challenge in 106deg heat and a busy roadway. Did manage to confirm that the hardware kits were still intact. As for tube damage we will see what they look like during install this weekend
by: Jeffery12/05/2022
I purchased the Lippert solera slide topper for our camper sence all the reviews and information I have read is that this is the best brand to get.
Looks good and can't wait to install it this summer. The first one showed up damage & missing parts during freight shipping but I called etrailers customer service and they got things going on what to do next. Alison B. a customer service rep contacted me and with a few calls and emails they sent out a New one & everything worked out great. Thanks again to Alison & the customer service team .I will definitely purchase more from etrailer in the future. Pictures to be posted of the install later when warm weather returns.
by: Travis01/03/2019
While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
by: Stanley01/29/2024
The product is a good product if I could get one shipped to me that was not damaged. The shipper etrailer uses Tforce and they really suck. I have received two of these awnings and both were bent and unusable. I received a refund for the first one ordered another it was also bent. I recommend ordering from another vender.
by: Stephen 01/20/2024
I originally bought 3 of these toppers after doing my due diligence on the BEST brand to go with , quality matters to me . Once installed 1 didn’t perform correctly when it rained I contacted Etrailer who’ve I also did research on mostly focused on shipping times and mainly customer service AFTER the sale , their customer service/support is over the top , it was like dealing with Sears forty years ago! . I’m glad I had the great experience working with them and will never purchase another product fo my fifth wheel anywhere else . I am not a review writer by nature so for me to write one good or bad means they really are the only company in my opinion that you need to consider if you are shopping for a , in my case a fifth wheel a accessory, pricing was competitive but where it really matters to me was customer satisfaction is a 100% for me . Thanks
25
940
Show More Reviews
See what our Experts say about this Lippert RV Awnings
- Slide Out Recommendation For A 167 Flange To Flange MeasurementThe Solera RV Slide-Out Awning - 14'1" Wide - 48" Projection - Black Item # LCV000168112 will fit your 167" length and 37" box length. It's recommended to have at least 7" of clearance on each side to avoid the arms of the topper colliding with anything else on your trailer.
view full answer... - How to Determine if Solera Slide Topper # LCV000168112 Fits RV Slide OutEasiest way to know if the Solera slide topper # LCV000168112 fits your application is to compare the distance from slide out flange to flange that already took to the box width range that awnging fits. If your box width including the flanges is between 164" to 169-3/4" this slide topper fits. If you have a different width let me know and I'll check to see what would be the best fit.
view full answer... - What Is The Distance Between Bottom Of The Bracket To Top Of Awning On Solera Awning LCV000168112I had out warehouse measure the Solera RV Slide-Out Awning - 14'1" Wide - 48" Projection - Black # LCV000168112 you were looking at and from the bottom of the mounting bracket to the top of the roller measures in at 9-3/4" as shown in the included diagram, and the rail for the awning needs to be 3" - 6" above the top of the edge of the slide out. I included a video of the # LCV000168112 for you to take a look at.
view full answer...
- Correct Slide-Out Awning for 13 Foot 11 Inch SlideWe do have the correct slide-out awning for you, so long as the 13 foot 11 inch measurement you took was from flange to flange on the outside of the box; you can choose from either White or Black for color: - White: Solera RV Slide-Out Awning - 14'1" Wide # LCV000163302 - Black: Solera RV Slide-Out Awning - 14'1" Wide # LCV000168112 I've added a link to a video review for you to check out as well.
view full answer... - Slide Topper Awnings For a Slide Out Room Measuring 13'8" to 14'1" Wide Flange To FlangeWe have the Solera RV Slide-Out Awning in White # LCV000163302 or Black # LCV000168112. These slide toppers are designed to fit a slide out room with a flange to flange outer width of 13'8" to 14'1".
view full answer... - How To Choose The Correct Slide Out Awning Size For Your RVThe Solera RV Slide-Out Awning # LCV000168112 will fit your RV's slide out that measures 167" including the flange, and 37" long. This awning will fit slide outs that are 164-169" wide and up to 48" long. However, you will need at least 7" of clearance on either side of your box so if you do not have that then you will have to order the next size down which would be the Solera RV Slide-Out Awning # LCV000168110.
view full answer... - Slide Out Awning Recommendation for Slide Out that Measures 168 inchesIf the width you measured of 168 inches included the mounting flange around the outside of the box then yes the Solera slide topper size you need is the 14-1/2 foot size like the part # LCV000168112. If the measurement didn't include the flange you'd need the next size up of # LCV000251477 which is for widths of 170" to 175-3/4".
view full answer... - Slide Out Awnings to Fit Flange Widths on RV that Measure 5 Foot and 14 FootThe correct slide topper for your 5 foot wide slide out is the part # LCV000168104 and then for the 14 foot slide out you'd want the # LCV000168112 and you'd be set. Both of these match the mounting flange dimensions you mentioned and come with everything you'd need to install as well!
view full answer... - Which Slide Awning Fits 14 foot Outside Flange to Outside Flange MeasurementSince your slide out is 14 feet (168 inches) from the outside of one flange to the outside of the other then you will want to go with the 14.5 foot Slide-Topper. This is available in either Black # LCV000168112 or White # LCV000163302 and will fit outside to outside flange measurements of 164 inches to 169-3/4 inches.
view full answer... - Is There a Solera RV Slide-Out Awning to Fit the 14' Slideout on My 2012 Keystone SpringdaleWe do have a slide-out awning to fit your 2012 Keystone Springdale Travel Trailer, the Solera RV Slide-Out Awning - 14'1" Wide - 48" Projection - Black # LCV000168112. The Solera Slide-Out Awning # LCV000168112 fits RV's ranging from 164" to 169".
view full answer... - Solera Slide Topper Fit For 166-1/2 Inch Flange to Flange MeasurementThank you for that measurement and we do have the correct Solera slide topper for your 166-1/2 inch flange-to-flange slide, and you can choose from either Black or White: - Black: Solera RV Slide-Out Awning # LCV000168112 - White: Solera RV Slide-Out Awning # LCV000163302
view full answer... - Solera RV Slide-Out Awning Recommendations and MeasurementsFor determining the proper size Solera Slider you need, to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the left/right side overhang). You can have greater than 2-1/2" overhang if you want, but it is suggested that you do not go any less. Since you have done so with resulting measurement of 162.25" you need an awning no less than 167.25. You can go beyond the overhang of 2.5" each side if you choose, no worries....
view full answer... - Recommended Slide Toppers for 161 and 82 Inch RV Slide-OutsAssuming that the widths of the slides you provided were measured from flange to flange which is the widest point of the slide, I'd recommend the Solara # LCV000163302. This slide topper is what we'd typically recommend for a 164-169 inch long slide, so it's a size larger than what I'd usually recommend. For your 82 inch slide, use # LCV000163288 which is also a size up from what I'd typically recommend. You can see a typical installation by clicking the provided link.
view full answer... - Recommended Solera RV Slide-Out Awning for Flange-to-Flange Measurement of 167-3/8Either will be a good fit, it comes down to personal choice of how much overhang would you like and if there is the room for the wider overhang. Providing there is no obstruction in allowing the wider option to be installed, The Solera RV Slide-Out Awning - 14'7" wide with a 48" projection, # LCV000163303 for white and # LCV000251477 for black, will work for your 167-3/8" flange-to-flange slide-out. This has an actual awning rail width of 175" therefore providing slightly more than 3"...
view full answer... - Recommended Slide Out Topper Awnings For A 2022 Heartland Prowler 320BH Travel Trailer I have the following recommendations for the slide outs of your 2022 Heartland Prowler 320BH travel trailer; 90" Slide Out: Solera RV Slide-Out Awning - 7'7" Wide - 48" Projection - Black # LCV000168106 or # LCV000163288 for white. 164" Slide Out: Solera RV Slide-Out Awning - 14'1" Wide - 48" Projection - Black # LCV000168112 or # LCV000163302 for white. We do recommend having at least 5-7" of clearance on each side of the slide out to allow for the arms to properly retract without...
view full answer... - Why Do the Solera RV Slide-Out Awnings Come with Two Piece BracketsThe Solera RV Slide-Out Awnings like part # LCV000168112 come with different brackets now, the Solera Slide Topper Access Kit part # LC795354 that you mentioned. The reason for this is because trailer manufactures have now started to install a prep kit from the factory that allows you to slide the slide topper bracket onto the trailer without drilling but you can still install the kit on a trailer without the prep kit as well by drilling. If you prefer the old style bracket, we still have...
view full answer...
Do you have a question about this RV Awning?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Dustin K
Updated by:
Chelsea B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Michael B
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
Randy B
Written by:
Kristen H
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark
8/6/2021
Still works and looks like new!