Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 8'7" from edge to edge. Includes all necessary components.
Features:
Specs:
To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you don't have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage.
If there are two slide-outs next to each other, you will need a total of 14" of clearance between them for them both to have a slide-out awning. Again, you can go down a size if you are low on space.
Without a slide-topper, the roof of your slide-out room is continually exposed and can accumulate leaves and bugs and different types of debris. That debris can build up along the rubber strip at the top of your box, preventing a firm seal when your slide-out is retracted. Rain water can then get in and pool on the top of your slide-out. If you don't clear the water off each time it rains, mold can begin to form. And when your slide-out is pulled in, that mold gets inside your RV.
The Solera RV slide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out. Not only does it prevent debris from collecting on the roof of your slide-out, but it keeps water from pooling and potentially causing damage down the road. Because it mounts directly to the front of the slide box, the slide-out awning is able to automatically extend and retract every time the slide-out room is extended or retracted.
The durable awning fabric holds up to the rigors of the outdoors. It's made of premium 13.5-oz vinyl, which is an upgrade over the 10-oz fabric used in many awnings. This fabric also features heat-welded seams to prevent leaks. And it is made to withstand cold temperatures down to -25 degrees Fahrenheit, so it won't crack or degrade during the winter.
Use the self-tapping screws to secure the included access plate to the side of your slide-out, positioning the plate at the bottom of the T-molding. The two access brackets slide easily onto the access plate's track. The rods that are located at each end of the roller tube, which comes with the awning fabric already mounted, slide through the hole in the two access brackets.
The included awning rail is used to anchor the other side of the fabric to your RV. This rail can be mounted up to 5" above the trim on top of your slide box.
Note: It's important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (1105 Customer Reviews)
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 8'7" from edge to edge. Includes all necessary components.The slide topper works great and is not hard to install if you have someone to help slide it on and attach the rods. Otherwise it is a one-man job. The only problem I had was screwing the self-tapping screws through the rods. The rods are too hard. After twisting off and drilling out the first two screws, I drilled a hole big enough for the screws to bite into without twisting off. Otherwise I would have given the products and customer service 5 stars
Sales people are very helpful. Installed very easy.
Just received this today, everything looks right, will have it installed next week and be able to expand on this review. It took a while to ship, I was kept in the loop and had excellent customer service
every thing is perfect and the service dept. was very helpful with a few questions I had .I wish when ordering the awning that someone would have told me I had to order the black hardware with a black awing it came with white hardware instead of black Thanks John
6000 plus miles now and no problems. Works every time, we’re very satisfied with the unit. It was easy to install, the wife and I had it done in about 45 minutes.
Brian
7/23/2019
One year later still solid as the day we installed it. Traveled 23,000 miles last year. Newfoundland to British Columbia and all over the Western half of North America. The slide topper was money well spent. Cooler, cleaner and quieter.
Great product for roof shade and roof maintenance. Keeps inside cooler in the summer sun. Had a problem installing one or two brackets where they didn't seem to grab well. Solved that problem with a few extra screws and been working great since.
We have had this slide-out awning for 1 year and it still works fantastic! Very glad we purchased it. Easy to install & a quality product!
Ordered four additional toppers after trying one to try installing it by myself. Except for the step that requires two people to actually insert the topper fabric into the rail, it was a relatively simple process. Very impressed with the LCI product so far. I placed etrailer.com order on Tuesday, delivered on Friday. Pretty good service considering they also had the best price.
It does what we had hoped it would, sheds rain and protects the slide-out.
Installation was not that difficult, but definitely requires two people and several hours.
Seems like these should be standard equipment.
Worked perfect! Great customer service with people that have the correct answers!
Awning was fairly easy to install. I feel better knowing the slide is better protected now!
Great product, great service, zero conc erns
Are working great and look good
Very nice product, was easy to install.
Carol, I wanted to send you photos of how I received my two packages from the freight company. Y'all have been great to deal with but the delivery method needs improving. As long as my awnings are not missing any parts and are not damaged, I will be happy. But I just got back home and found the boxes like this. I thought you would want to know.
This awning was packaged well and it arrived undamaged, however, when I took it out of the package the top rail was bent and the groove where the awning slides in was damaged. I was able to open the groove by bending and it was still serviceable. The hardware package had been opened previously, but nothing was missing. On the bead end of the vinyl where it is glued together was not glued properly. It was on the leading end of the awning so it would take a beating while driving. I repaired it with super glue and hopefully it will hold properly. Those are my complaints and why I gave it only 3 stars. On the other hand, the instructions were thorough and easy to follow. The hardware installation was straight forward and was completed without issue.
I have purchased from etrailer for years and have been very satisfied with the service and quality of their products. This one didn’t measure up due to the factors above.
Product was destroyed in transit. Please refund my money. I will not be interested in further negotiations with e trailer. It seems to be a systematic issue with your choice of transportation vendor. Best wishes.
I purchased a total of 5 slide toppers for my Grand Design Solitude 390RK. After a year of use I love them. No more climbing on the roof to clean off the slide outs before retracting them. Very little flapping and only in very strong winds. Had one person helping to install 3 of them, 2 I installed by myself. It wasn't that hard. Took a little over an hour to install each one. Saved hundreds of dollars by doing it myself. Would definitely buy them and install them again again. Had very fast and good service from etrailer.
Perfect fit for my Coachmen Clipper 17BHS slide out. Install was easy with the etrailer install video! They cover every step in the video and explain assembly better than the supplied instructions. Works great at keeping out the leaves, hoping it works to help keep water out of the slide out seams too.
I am not sure whose fault it was, but it took about 3 months for my order to be completed. It was backordered initially, which is fine, but somehow shipped two weeks early. I get ready to install and realize the awning rail, and half of the screws are missing. It appeared to be an open box item, or maybe items taken, and sent to another customer. Customer service was great, (through the whole process, keeping me informed) and they requested the missing parts, which were also back ordered. Two months later, the parts become available and they ship me another slide topper, with the awning rail, but missing all of the screws again!!!! This required another order to be placed for the screws, which took almost two weeks to arrive. I then needed to return the extra awning with the freight company, which was aggravating because they kept canceling/rescheduling dates. Finally got it all installed which took about an hour. The slide topper looks great now that it’s finally installed!
Your choice of LTL carrier is poor at best. They arrived a week later than what they originally scheduled. All 3 packing tubes that the slide toppers were shipped in were damaged. Off loading and inspecting was a challenge in 106deg heat and a busy roadway. Did manage to confirm that the hardware kits were still intact. As for tube damage we will see what they look like during install this weekend
While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
I purchased the Lippert solera slide topper for our camper sence all the reviews and information I have read is that this is the best brand to get.
Looks good and can't wait to install it this summer. The first one showed up damage & missing parts during freight shipping but I called etrailers customer service and they got things going on what to do next. Alison B. a customer service rep contacted me and with a few calls and emails they sent out a New one & everything worked out great. Thanks again to Alison & the customer service team .I will definitely purchase more from etrailer in the future. Pictures to be posted of the install later when warm weather returns.
The product is a good product if I could get one shipped to me that was not damaged. The shipper etrailer uses Tforce and they really suck. I have received two of these awnings and both were bent and unusable. I received a refund for the first one ordered another it was also bent. I recommend ordering from another vender.
I originally bought 3 of these toppers after doing my due diligence on the BEST brand to go with , quality matters to me . Once installed 1 didn’t perform correctly when it rained I contacted Etrailer who’ve I also did research on mostly focused on shipping times and mainly customer service AFTER the sale , their customer service/support is over the top , it was like dealing with Sears forty years ago! . I’m glad I had the great experience working with them and will never purchase another product fo my fifth wheel anywhere else . I am not a review writer by nature so for me to write one good or bad means they really are the only company in my opinion that you need to consider if you are shopping for a , in my case a fifth wheel a accessory, pricing was competitive but where it really matters to me was customer satisfaction is a 100% for me . Thanks
Do you have a question about this RV Awning?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
5/10/2022
Great