Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs
(16 reviews)
Price: $137.48
In Stock
Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs
Item # INA453
Retail:$187.37
Our Price: $137.48
You Save: $49.89
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (16)
- Q & A (0)
- Photos
Inno Accessories and Parts - INA453
- Watersport Carriers
- Load Assists
- Inno
This lift assist allows a single person to easily load a kayak onto a roof rack. Swing-out arm holds your boat upright - away from your vehicle - as you load it, and it stores on your crossbars when not in use. Easy, clamp-on installation.
Features:
- Load assist makes it easy for one person to lift a kayak or canoe onto a roof rack
- Eliminates the need for a second set of hands while loading
- Takes the strain out of lifting your boat onto the roof
- Swing-out arm lets you load boat from the side of your vehicle
- Helps protect boat and vehicle from scratches and scuffs
- Secures in stored position with ratcheting strap
- Board pads (INA771 - sold separately) help protect your kayak during loading
- Tie-down straps (sold separately) secure boat to the roof rack
- Easy, clamp-on installation to most crossbars
- Lightweight, rustproof aluminum construction with silver powder coat finish
Specs:
- Application: round, square, aero, elliptical, and most factory crossbars
- Maximum crossbar dimensions: 3-1/2" wide x 1-1/8" tall
- Crossbar spread: 27" - 39"
- Weight capacity: 90 lbs
- Swing-out arm length: 18"
- Base bar length: 43"
- Weight: 8.8 lbs
- Limited lifetime warranty
The Inno Kayak Lifter allows one person to easily load a kayak or canoe onto a vehicle's roof rack. The swing-out arm lets you load your boat away from the side of your vehilce to help avoid scratches and dings, and it stores on your crossbars when not in use. The load assist is constructed of rustproof aluminum, and it installs without tools on most crossbars.
Quick and Easy Installation
The load assist installs easily on most crossbars - no tools required. Simply place the load assist on your crossbars with a mounting bolt on either side of the bar. Thread the mounting bracket onto the ends of the bolts - under the crossbar - and secure it in place with hand knobs.
Simple, One-Person Loading
The swing-out arm lets a single person easily load a boat onto the roof of a vehicle. To load, rotate the arm out and away from the base bar on the side of your vehicle.
Lean your kayak or canoe against the arm. lift the rear end of the boat up so that it is level with your roof rack, and set it on your vehicle's rear crossbar. Use the back end of the boat to lift the front end and pivot it into place on your vehicle's front crossbar. Once in place, secure your load with tie-down straps and bow/stern tie-downs (sold separately) to secure the kayak to your crossbars and to your vehicle. Board pads (sold separately) protect your boat from scratches during transport.
Once your kayak is loaded and secured, simply rotate the arm back into the stored position and secure it with the integrated ratcheting strap.
INA453 Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs
Installation Details
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- etrailer mistake
- Did not fit
- Wrong item was ordered
Customer Reviews
Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs - INA453
Average Customer Rating: 4.5 out of 5 stars (16 Customer Reviews)
This lift assist allows a single person to easily load a kayak onto a roof rack. Swing-out arm holds your boat upright - away from your vehicle - as you load it, and it stores on your crossbars when not in use. Easy, clamp-on installation.by: John06/17/2021
I just finished building a cedar strip canoe and needed something that would help me get it on the roof rack without causing blemishes to the canoe. This was perfect for giving me the extra hand to load onto the roof rack of my full size SUV.
by: Jody 09/14/2023
Still working and offers a big helping hand when trying to get my kayak up onto my j-hooks
by: John10/18/2022
It sort of worked - but lifting a 70 pound kayak onto a Jeep was still an iffy proposition. So I have recently bought a Thule Hullavator - hugely better and hugely more expensive). So this item has been retired. The Inno lifter was never all that confidence inspiring - sagged when the weight of the kayak was put on it, making me think that a failure was imminent. It never failed but it was just too flimsy to really count on it.
by: Oliver04/18/2022
Does not work with my rack. Can I return it? Just an observation that device needs a longer rest for kayak otherwise kayak will scratch side of vehicle during loading. The device could not fit on my roof rack. There is not enough clearance on my roof rack to attach the mounting brackets. Device is not defective and was not mounted on the car or used at all.
Katrina B.
4/26/2022
Often times you will need a slightly longer crossbar that overhangs in order to use load assist and give you more clearance from your vehicle. We recommend using a crossbar that overhangs at least 4 inches length past the feet or side rails.
by: Roger S04/03/2019
What a great purchase. My Kayak is slightly over 70 lbs, I'm older and short so getting a Kayak on top of our SUV was becoming a challange. The Inno Kayak lifter changes all that. Very pleased. Also the shipment arrived much quicker than I expected.
Roger S.
4/4/2020
Im still extremely pleased with this purchase. Ive got a lot of use with this.
by: Jeff 07/29/2021
Easy to install and works for loading a 17 foot aluminum canoe without help from others.
by: Max08/21/2022
The right product, delivered quickly, minor problems resolved immediately, excellent customer service. Cannot think of any reason why I would not consider this company 1st when buying anything for my vehicles.
by: Curt 12/20/2021
Works very well I am able to load 16 foot 57# kayak on top of truck by my self
by: Andy10/27/2021
This installed in minutes and saves so much trouble when loading a kayak! Very happy with the purchase. 10/10 recommend.
by: Doug C.06/01/2019
Worked like a charm!...I put a tandem Hobie mirage on top of a Jeep jk no problem man?? Ps . I’m 5’6” short and 61 years old ??
by: Susan 04/21/2021
Looks great ! Feels sturdy and well made....... not putting it on the car for a while.... it’s actually snowing in Upstate NY today !
by: Earl 07/23/2022
super easy to put on
by: Lauren 09/03/2023
by: Jason 09/23/2022
by: Steve 04/09/2021
16
16
See what our Experts say about this Inno Accessories and Parts
- Load Assist That Works With a Smittybilt SRC Round Bar Roof Rack on a JeepWe do have an option for a load assist that works with round crossbars, but the Rhino-Rack Universal Load Assist # RR-RUSL does not; it will only work with certain aero and square crossbars. Instead, you would need the Inno Kayak Lifter Load Assist # INA453. The Inno Kayak Lifter Load Assist # INA453 is a universal fit that will work with all shapes of crossbars (including round), as long as the crossbars have between a 27" to 39" spread. This is a fairly standard spread, so it is likely...
view full answer... - Are Thule Xsporter Pro Crossbars Compatible with a Side Load Assist?The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Silver # TH500XT has load bars that are 72" long x 3-1/2" wide x 1-1/2" tall. The Rhino-Rack Universal Load Assist - Side Loading # RR-RUSL is not a fit for the taller crossbars in this application. The Inno Kayak Lifter Load Assist # INA453 is also not a fit based on the bar height but either option may work with slight modifications. There is not a direct fit available.
view full answer... - How to Carry 4 Kayaks Weighing a Total of 139 lbs on Roof of 2017 Chrysler Pacifica LimitedSince the total weight of your kayaks is 139.2 lbs and your 2017 Chrysler Pacifica Limited is rated for 150 lbs then you can definitely transport all 4 on your roof! For your application I do recommend using the Rhino-Rack Nautic # RRS520 over the Thule Stacker # TH830 because it isn't as wide which will help with your crossbar space. You can use the Rhino-Rack Anchor Straps # RRRBAS-2 for attachment points at your hood and hatch and then the Rhino-Rack Cam-Buckle Cinch Strap and Anchor...
view full answer... - Options for Loading 2 or 3 Kayaks on 2016 Subaru OutbackIt is possible that you will be able to carry 3 kayaks on the roof of your 2016 Subaru Outback, but it will depend on the length of the crossbars on your vehicle and the depth of your kayaks. The SportRack Kayak Carrier # SR5511 you referenced is a good, economical solution to carry the kayaks on the roof. J-style carriers typically take up approximately 17-1/2 inches of space. This means you would want around 53 inch crossbars to accommodate 3 kayaks in J-style carriers. If you typically...
view full answer... - Will The Malone MAL84AR Fit A 2024 Outback Wilderness And Work With The INA453 Load AssistYes, the # MAL84AR will indeed fit your 2024 Subaru Outback Wilderness. The 58" crossbar will provide plenty of overhang for the load assist # INA453 to work normally.
view full answer... - Does The Inno Kayak Lifter Load Assist Work With J-Style Kayak Carriers?The Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs # INA453 will work just fine on crossbars that already have a J-style kayak carrier installed. Since the Inno Load Assist mounts on the side of the crossbars, it will not interfere with the kayak carrier. You will just want to make sure your crossbars have a spread of 27-39"; crossbar spread is the distance between each crossbar, measuring from the center of each bar. You will also want to make sure your crossbars are...
view full answer... - Recommended Roof Rack Load Assist For Truck With Camper Roof Rack That Is 7-1/2' From The GroundWith the height of your truck camper at 7-1/2' tall I recommend using a Inno Kayak Lifter Load Assist # INA453. This will clamp onto your crossbars up to 3-1/2" wide and 1-1/8" tall and fits a crossbar spread of 27-39". Since it is clamped onto your crossbars you will not have to concern yourself with the limited height of the Rhino-Rack Universal Load Assist # RR-RUSL only extending to 7'3-1/8" tall. Or having to try to position the bar on the crossbars every time you load and unload your...
view full answer... - Recommended Kayak Lift Assist For Roof Racks To Allow One Person Lifting And LoadingMy recommendation for getting your 14.9 Scupper Pro onto your roof rack is to use the Malone Channel Loader Kayak Load Assist # MAL48FR. This will allow you to easily load your kayak from the ground onto your vehicle roof by yourself. It uses a roller similar to a boat trailer to roll the kayak up onto your crossbars. A side loading option to give you a pivot point is the Inno Kayak Lifter Load Assist # INA453 if you prefer a smaller load assist.
view full answer...
- Does The Inno Kayak Load Lifter Fit On The OEM Cross Bars On A 2019 BMW X3?I took a look at the G01 OEM roof rack for your 2019 BMW X3, and the Inno Kayak Lifter Load Assist # INA453 will work just fine. This kayak lifter will fit onto round, square, aero, elliptical, and most factory crossbars that have a maximum crossbar dimensions of 3-1/2" wide, and 1-1/8" tall. According to my research, your BMW's OEM cross bars are 3-1/4" wide, so these will work great.
view full answer... - Will Inno Kayak Lifter Load Assist INA453 Fit Factory Roof Rack Crossbars on a 2013 Toyota RAV4The Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs Item # INA453 will fit factory crossbars up to 3-1/2 inches wide by 1-1/8 inches tall. Measure the bars on your 2013 Toyota RAV4 to determine if they meet those specs. The swing-out arm is 18 inches long and the base bar is 43 inches long. With roof rack bars that do not extend out past the side rails that 18 inch swing arm length may or may not be long enough for you. A similar option is the Rhino-Rack Universal Load...
view full answer... - Help Loading Kayaks onto Crossbars on a Truck Camper ShellThe ideal solution to make it easier to load your kayaks is the LongArm # Y01149-1150 for a 2 inch hitch. It will make it so much easier to get the kayak up to the roof. Another option is the Inno kayak lifter load assist # INA453. Instead of helping load from the back it helps from the side. Take a look at the video I have linked showing how it works.
view full answer... - Compatibility of Load Assist with 2002 Subaru Forester OEM CrossbarsThe Rhino-Rack Universal Load Assist # RR-RUSL has a couple mounting hole options to ensure a fit on most crossbars. There hasn't been a confirmed fit on your 2002 Subaru Forester factory crossbars, so I recommend you use the Inno Kayak Lifter Load Assist # INA453 instead which has been designed to fit with your factory bars.
view full answer... - Can Two Thule Hullavators Be Used On a 2020 Chevy EquinoxI do have an option but you cannot use two Thule Hullavators part # TH898 together per Thule which has to do with both weight and crossbar space. Instead, I recommend substituting one of the Hullavators for the etrailer J-Style Kayak Carrier part # e98878. I order to use these together on a 2020 Chevrolet Equinox (Bare Roof) I recommend the Thule WingBar Evo Crossbar System part # TH711400, part # TH710501, and part # TH145206. For load assist, the best option for the other kayak would...
view full answer... - Can Yakima BigStack be Used for 40 lbs, 10-1/2 Long Kayak on 2011 Subaru Outback WagonThe Yakima BigStack # Y04041 can definitely handle a 40 lb, 10-1/2' kayak on your 2011 Subaru Outback Wagon, and it can be loaded by one person provided that person can lift and maneuver the 40 lbs. If the 40 lb kayak is a little much for you to handle on your own you may want to look into a load assist carrier like the HandRoll # Y04082-2, ShowDown # Y04081, or a supplemental load assist like the Inno # INA453 or Rhino-Rack # RR-RUSL.
view full answer... - Is Inno Kayak Load Assist part #INA453 compatible with Lexus Rx 350 crossbars? Thanks! The Inno Kayak Lifter, part # INA453 is compatible with crossbar spreads between 27-39 inches. It will fit crossbars that are up to 3-1/2 inches wide by 1-1/8 inches tall, so if the crossbars on your vehicle roof fall into those parameters, the Kayak Lifter will be compatible. The lifter works best with crossbars that extend past the roof rack feet, so the side rail of the load assist provides a surface for the kayak to ride along as it's being pushed up on the roof, but that's not absolutely...
view full answer... - Recommended Load Assist Options For Kayak Or Canoe Onto Roof RackA loading option is the Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs # INA453. This allows you to load the kayak from the side of your vehicle giving you an L shape to help pivot the kayak. Another option is the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs # RR-RUSL which attaches to your crossbar and then extends with an adjusting pole to support the load and give you a pivot point.
view full answer... - Recommended Side Load Assist Bar For Yakima Jaylow J Racks When it comes to installing a side load assist bar to work with your Yakima Jaylow J Rack Bars The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 pounds # RR-RUSL will only work with Rhino-Rack Vortex Aero, Euro, and Heavy-Duty crossbars; Whispbar Flush, Through, Rail, and HD crossbars; and Thule AeroBlade and square crossbars. So they will not work with your Yakima bars. The Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 pounds # INA453 has an easy,...
view full answer... - Could Inno Kayak Lifter Load Assist # INA453 Fit Factory Volvo CrossbarsYou'll need to take two easy measurements to determine if the Inno Kayak Lifter Load Assist # INA453 can fit your crossbars. Measure the width and height of the bars and if they are less than 3-1/2 inches wide and 1-1/8 inches tall this load assist will fit and work great. I attached a review video for this for you to check out as well.
view full answer... - Will the Rhino-Rack Universal Load Assist # RR-RUSL Fit a 2012 Jeep CompassThe Rhino-Rack Universal Load Assist # RR-RUSL comes with several brackets that will fit Rhino-Rack Vortex Aero, Euro, and Heavy-Duty crossbars; Whispbar Flush, Through, Rail, and HD crossbars; and Thule AeroBlade and square crossbars. If you have one of those systems then you will be good to go. If you have the factory roof rack crossbars then it is possible that one of the included brackets will fit but I cannot guarantee it and they do not make any other brackets for use with this load...
view full answer... - Compatibility of the Inno Kayak Lifter on a 2014 Toyota RAV4The required crossbar spread to install the Inno Kayak Lifter, # INA453, is 27-39 inches measured from center to center of the crossbars. If your factory crossbars can be adjusted to this measurement, then the Inno Kayak Lift will mount to the top of your RAV4. The Inno Kayak Lifter will mount to square, round, and most factory bars and support a maximum 90 lbs. Inno recommends the maximum crossbar dimensions to be 3-1/2 inches long and 1-1/8 inches tall to mount the kayak lifter to your...
view full answer... - Roof Rack and Kayak Carrier Recommendations for 78 lb Kayak on a 2013 Toyota PriusI recommend picking up the Inno Aero roof rack because you'll get a quality rack without feeling the quality price point of a Thule or Yakima rack. The parts you'll need for your 2013 Toyota Prius are the following: 51" and 54" Aero Crossbars - # INXB130-138 Through Feet - # INXS250 Fit Kit - # INK865 If you don't already have a kayak carrier I recommend checking out the etrailer Carrier # e98878. This is a simple yet effective J-Style rack that has a 150 lb weight capacity and folds...
view full answer... - Lift Assist For 90 lb KayakThe Hullavator is only rated to carry kayaks up to 75 lbs. The Inno Kayak Lifter # INA453 on the other hand, is rated for 90 lbs!
view full answer... - Recommended Kayak Carrier for 2017 Ford Expedition with Factory Cross BarsIn order to make getting your kayaks up and down off of your 2017 Ford Expedition I recommend using the Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs # INA453, which can be mounted on either side of your vehicle and can be used to help you load your kayaks into a kayak carrier. As long as the combined weight of your kayaks is under 130-lbs you can use the Thule Compass # TH890000, which will carry 2 kayaks and can be used with the Inno Load Assist mentioned above. If...
view full answer... - 2021 Subaru Outback Factory Rack What Are My Kayak Load Assist OptionsAccording to Inno, the Inno Kayak Lifter Load Assist - Clamp On - Side, part # INA453, is supposed to be mounted outside of the towers on your vehicle. Unfortunately the bars on your roof rack terminate at the rails on your vehicle so you will not be able to use this with your factory bars. However, I may have a solution, I recommend the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading, part # RR-RUSL. It comes with six different adapters to fit different size racks and...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Tyler C
Video Edited:
Dustin K
Updated by:
Lisa S
Updated by:
Ronnie R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
6/18/2022
Works great! After 200 hours of building a cedar strip canoe, I wanted some security of not having it slide off to the side while loading onto the roof rack.