THIS ITEM IS NOT A FIT FOR
2010 Chevrolet Silverado
Hopkins Plug-in Simple Brake Wiring Adapter - Ford
Item # HM47715
Retail:$24.75
Our Price: $14.41
You Save: 42%
2010 Chevrolet Silverado
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (40)
- Q & A (0)
- Photos
Hopkins Accessories and Parts - HM47715
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Hopkins
- Vehicle Specific
Why mess with wires and splicing, when you can plug it in? Designed to fit Hopkins Agility brake controllers, this wiring adapter will have you on your way in no time!
Features:
- Includes 2 plugs
- 1 Plug is inserted into the back of the Hopkins Agility Brake Control Unit
- 1 Plug is inserted into the factory-installed port under the dash
- Fits Hopkins Agility Trailer Brake Controller (HM47294)
Specs:
- Compatible with Ford / Mercury / Land Rover / Lincoln vehicles
- 1994-2008 Ford F-150
- 1994-2004 Ford F-250 / F-350 Super Duty
- 1997-2009 Ford Expedition
- 1994-1998 Ford Van (full size)
- 2003-2004 Ford Van (full size)
- 2000-2005 Ford Excursion
- 1995-2003 Ford Windstar
- 2000-2008 Ford Explorer
- 2000-2008 Mercury Mountaineer
- 1994-1996 Ford Bronco
- 2005-2008 Land Rover LR3
- 2007-2008 Land Rover Range Rover
- 2007-2008 Lincoln Mark LT
- 1998-2008 Lincoln Navigator
You have a lot to think about when you are connecting a vehicle to a trailer or RV. Hopkins makes it easier with a vehicle-specific wiring adapter, designed to fit the Agility brake controller. Simply plug it in and go.
47715 Brake Control Connectors
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2009 Winnebago Access Motorhome with factory 4-Flat
- 2007 - 2009 Winnebago Access Motorhome with factory 7-Way
- 2012 - 2020 Thor ACE Motorhome with factory Tow Package
- 2016 - 2020 Holiday Rambler Admiral Motorhome with factory Tow Package
- 2016 - 2018 Holiday Rambler Admiral XE Motorhome with factory Tow Package
- 2000 - 2020 Winnebago Adventurer Motorhome with factory Tow Package
- 2016 - 2020 Jayco Alante Motorhome with factory Tow Package
- 2000 - 2018 Tiffin Allegro Motorhome with factory Tow Package
- 2012 - 2012 Holiday Rambler Aluma Lite Motorhome with factory Tow Package
- 2005 - 2009 Winnebago Aspect Motorhome with factory 4-Flat
- 2005 - 2009 Winnebago Aspect Motorhome with factory 7-Way
- 2008 - 2008 Holiday Rambler Augusta Motorhome with factory 4-Flat
- 2008 - 2008 Holiday Rambler Augusta Motorhome with factory 7-Way
- 2018 - 2018 Fleetwood Axom Motorhome with factory Tow Package
- 2018 - 2018 Fleetwood Axon Motorhome with factory Tow Package
- 2012 - 2020 Newmar Bay Star Motorhome with factory Tow Package
- 2013 - 2019 Newmar Bay Star Sport Motorhome with factory Tow Package
- 2000 - 2009 Bigfoot Bigfoot Motorhome with factory 4-Flat
- 2000 - 2009 Bigfoot Bigfoot Motorhome with factory 7-Way
- 2010 - 2015 Fleetwood Bounder Classic Motorhome with factory Tow Package
- 2000 - 2020 Fleetwood Bounder Motorhome with factory Tow Package
- 2008 - 2009 Gulf Stream Bounty Hunter Motorhome with factory Tow Package
- 2001 - 2016 Winnebago Brave Motorhome with factory Tow Package
- 1994 - 1996 Ford Bronco with factory 7-Way
- 2008 - 2009 Itasca Cambria Motorhome with factory 4-Flat
- 2008 - 2009 Itasca Cambria Motorhome with factory 7-Way
- 2008 - 2019 Newmar Canyon Star Motorhome with factory Tow Package
- 2000 - 2000 Coachmen Catalina Motorhome with factory Tow Package
- 2000 - 2002 Coachmen Catalina Sport Motorhome with factory 4-Flat
- 2000 - 2002 Coachmen Catalina Sport Motorhome with factory 7-Way See All Vehicle Fits
California residents: click here
Customer Reviews
Hopkins Plug-in Simple Brake Wiring Adapter - Ford - HM47715
Average Customer Rating: 4.8 out of 5 stars (40 Customer Reviews)
Why mess with wires and splicing, when you can plug it in? Designed to fit Hopkins Agility brake controllers, this wiring adapter will have you on your way in no time!by: Joseph H08/26/2016
Ford Flex
Easy install. Everything lined up on my Curt trailer hitch receiver C14360. 30 min install.
Also bought the Hopkins in-sight flex mount brake controller HM47297 and the Hopkins plug in wire kit for ford to Hopkins controller HM47715. This adapter saved me loads of time installing controller another 30 min install.
All was left was find my factory wires for trailer brakes and 12v battery supply and I was finished. I would say I spent 1.5 hrs installing and .5 hrs cleaning up. I use this brake controller in all my vehicles.
by: Rick W.07/02/2014
Honda Insight
The brake controller to Ford wiring harness worked but it was barely long enough for the F-150 when connected to a Hopkins Insight brake controller with the controller mounted behind the left kick panel (behind the parking brake). I had to unclip the brake controller jack from the data port connector in order to have enough wire length to reach over and down to the kick panel area.
by: James DuBois01/07/2017
2002 Ford F-150
Have not installed brake parts yet but everything looks like it will work as described. Fast shipping will deal again.
by: Josef 04/10/2017
2006 Ford F-150
The preassembled harness was a nap to install following the installation instructions. Just verify, when ordering what type of vehicle you have, ford, dodge etc. For the plug in adapter.
by: Ben W.02/24/2014
Ford F-250 Super Duty
This adapter works fine, but needs to be at least 4 inches longer. The only routing I could manage to allow connection from the F250 trailer connector to the controller mounting position (required by the product) has the wires rubbing on the brake pedal. This will fail eventually.
I'd really like you to send a new, longer cable.
by: Darrell H.01/12/2017
2013 Ram 1500
Great product and service. I just hooked it up and everything works like it should, great product and service, received it sooner than expected, trailer brakes work great on my new trailer.
by: Robbie10/25/2017
It was nice to have knowledgeable help in deciding which trailer brake controller was best for my situation. Thanks!
by: Andy Anderson08/15/2018
2005 Ford F-150
Well worth the money if you have the OEM towing package already in place. 'Plug and play'.
by: Ryan R.04/15/2018
1999 Ford F-250 Super Duty
Perfect fit into my '99 F250 Super Duty. The etrailer support staff provided excellent assistance with some minor issues and questions that I had concerning my vehicle's set-up. I'm ready to hit the road fully set up to tow! Thanks etrailer.com
by: Conrad10/26/2017
Gold products, great prices, and excellent customer service. Any future trailer needs I'll definitely be back.
by: Mike F.12/08/2010
One of the BEST online suppliers!Prices are fair, customer service is fantastic and the shipping is lightening fast! 2 thumbs up! Plus the products are high quality. Both times I've bought from etrailer have been very good experiences. I highly recommend them.
by: Gerald I.01/18/2015
2003 Ford F-150
Easy install on 2003 F150 with Hopkins HM47294 and HM47715 adapter.
by: Richard 05/13/2021
Plug and play. It doesn’t get any easier for the install and looks factory
by: Tyler Graham, California09/24/2016
This a great pigtail, a quick plug and play but it could've been about 3 inches longer, other than that it worked perfect
by: Paul02/28/2017
The two items that I ordered, Are absolutely a perfect fit, and the brake control hooked up so easy.
by: Steve06/04/2019
2007 Ford F-150
Perfect fit. Made the controller installation super simple.
by: Paul04/04/2018
2007 Ford Expedition
Great service and parts .
by: Richard M.03/18/2015
Made the insall a no brainier. Plug and play
by: Herb05/13/2015
2014 Hyundai Santa Fe
Right item for the job? On time with instructions. Great
by: Rick T.07/23/2017
Installation was super easy.
by: Rick 09/26/2018
I really only needed one end, cut the plug I didn't need and wired it up
by: Gary02/14/2019
Makes life easier nice adapter.
by: Justin07/05/2016
Works great easy to install
by: Matthew Sifford05/13/2017
Great product easy to install. Very friendly sales and customer service personnel. Very happy with the service I have received. I'll definitely buy here again.
by: Wade 01/24/2022
Part fit as described.
25
40
Show More Reviews
See what our Experts say about this Hopkins Accessories and Parts
- Hopkins Reliance Brake Controller Installation in 1999 Ford F-250 Super Duty You can install your Hopkins Reliance hardwire-type trailer brake controller in your 1999 Ford F-250 by using harness part # HM47715. Just cut off the flat connector, splice the wires to your Reliance color for color using butt connectors like # DW05745-5 and plug it in to the under-dash port as shown in the linked video.
view full answer... - Brake Controller Does Not Power Up on a 2006 Ford E-450 VanJust to be sure, the Hopkins harness that you should be using for the 2006 Ford E-series van is # HM47715. Make sure that the factory fuse for the brake controller is installed. Use the van owner's manual to find the fuse and relay locations for the tow package wiring. I checked the owners manual online and it looks like there are 2 brake controller fuses. Inside the in-cab panel there is one in location 39. Under the hood there is one in location 10. If you have it all hooked up right...
view full answer... - Where is the Brake Controller Adapter Port on a 2007 Gulf Stream YellowstoneAccording to my research, your 2007 Gulf Stream Yellowstone is on a Ford E-450 chassis. If that is the case then the brake controller adapter port, if present, will be located under the driver dash panel near the emergency brake pedal. I have attached a video which shows this location at around the 5:20 mark. In order to install the Hopkins Agility Trailer Brake Controller part # HM47295 you will want to use the Hopkins Plug-in Simple Brake Wiring Adapter part # HM47715 if the brake controller...
view full answer... - Installing a Brake Controller and a 7-Way Trailer Connector on a 2005 Ford F-150 With Factory 4-WayUnfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller on your truck, you will need a 7-way adapter like part # 37185 that you referenced. It sounds like you may be familiar with the installation process, but I have included some installation details below as well as a FAQ article on how to install...
view full answer...
- Brake Controller Adapter For 2011 Range Rover SportThe brake controller adapters we offer that will work with your 2011 Range Rover Sport are designed to work with specific brake controllers. We do not have a universal adapter that will work with all controllers. If you have a Tekonsha brake controller like part # 90885 or # 90195, the adapter that will work for you is part # 3035-P. If the brake controller you have in your Range Rover is made by Curt, the adapter you can use is part # C51322. For a Hopkins brake controller you can use...
view full answer... - Recommended Brake Controller and 7-Way for a 2006 Ford F-150According to my research, the brake controller plug-in port was standard on your 2006 Ford F-150. Therefore, in order to use the Hopkins Trailer Brake Controller part # HM47294 you will want the Hopkins Plug-in Simple Brake Wiring Adapter part # HM47715. I have attached an install video for as well. The only other thing you need to set your truck up for towing a trailer with brakes is a 4 to 7-way adapter like the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. The brake (blue) and hot...
view full answer... - Locating Brake Controller Port on 2000 Ford F-150 To Install Hopkins Brake Controller # HM47294The factory brake controller plug should be located under the dash to the right of the steering column. It should be located towards the center of the dash and may be tucked up and out of the way behind some wiring. I have linked an FAQ Article that shows the location of the plug. You will need the Ford Adapter, part # HM47715, to plug into the brake controller harness and the Ford plug under the dash. If you have a factory 7-Way on your 2000 Ford F-150, installation is complete after...
view full answer... - What All is Needed to Install Hopkins Agility Brake Controller in 2001 Ford F-150To install the Hopkins Agility part # HM47294 that you referenced in your 2001 Ford F-150 the best and easiest way is to go with the install harness part # HM47715 which is a separate harness not included with just the controller. The reason it's not included is because it's a very specific fit for your Ford truck and there are several others similar for other trucks so it wouldn't make sense for everyone to have to buy all of the harnesses for all the truck variations. I attached an install...
view full answer... - Installing Hopkins Agility Brake Controller with Adapter # HM47294 in 2002 Ford ExpeditionThank you for providing the photo of the under-dash wiring on your 2002 Ford Expedition. The brake controller connection port under the dashboard on your Expedition should be located just to the right of your right knee when seated. Unless your vehicle had a factory brake controller installed this connector should not be occupied. To assist you I have linked you to an article that covers the brake controller installation process for Ford vehicles, including your 2002 Expedition. The article...
view full answer...
- Brake Controller Adapter Wiring Instructions for a 2002 F-250 With Factory Tow PackageYes, I can help you connect your Hopkins Agility Brake Controller, item # HM47294, to your Ford factory brake controller wiring adapter. The red wire from the Ford adapter should go to the black wire from the brake controller, the white wire should match to the white wire, the blue wire should match to the blue wire and the light green wire from the adapter should go to the red wire from the brake controller. This will get your brake controller setup and ready to attach to the port under...
view full answer... - Brake Controller on 2003 Ford Expedition is Only Working with Manual Override and Not Brake PedalYes, when a brake controller works with the manual override lever but not with the brake pedal that usually indicates a problem along the red wire. In this case, since it is a hardwire install the problem could also be the connection itself. You might check to make sure the red wire is making a solid connection to your brake switch circuit. This circuit should see voltage when the brakes are applied and none when the brakes are released. The most likely culprit is a blown stop light or...
view full answer... - Wiring the Hopkins Agility Brake Controller in a 2005 Ford F-150 Without Factory WiringYou will just need a few more things to install the Hopkins Agility Brake Controller, # HM47294, in your 2005 Ford F-150. The first thing you will want is the Hopkins Plug-in Simple Wiring Adapter, # HM47715. This adapter will plug into the factory brake controller port under the drivers side dash of your vehicle. You should see an open ended, gray plug hanging down near the diagnostic port. I have attached a photo showing what this port should look like. The next item you will want is...
view full answer...
- How To Extend the Wiring Harness of the Hopkins Brake ControllerAll it would take to extend the Hopkins Plug-in Simple Brake Controller harness # HM47715 so that it would be longer if necessary for you to install the Hopkins Brake Controller part # HM47294 would be 4 equal lengths of 10 gauge wire and butt connectors. You can use # 10-2-1 and # DW05745-10. If you have a Hopkins harness already with the correct gauge wire you could also use that, but splicing in additional wire would be the easiest method. I attached an install video that shows this...
view full answer... - Hopkins Brake Controller Wiring Adapter for 2012 Ford ExpeditionIn your 2012 Ford Expedition you can install a Hopkins Brake Controller like their Agility # HM47294 using the wiring adapter part # HM47715.
view full answer... - Is the Four Pin Brake Controller Connector Installed Under the Dash on All 2004 Ford ExplorersThe Hopkins Plug-in Simple Brake Wiring Adapter - Ford, item # HM47715, will only work on Ford Explorers that have the factory installed 7-Way connector at the rear of the vehicle. Since your vehicle has a 4-Way flat connector at the rear of the vehicle you will need to do some extra wiring to install a brake controller. The easiest way to wire a brake controller on your Explorer is to use a brake controller installation kit, item # ETBC7. You will need to plug the connector into the...
view full answer... - Hopkins Agility Brake Controller w/Ford Adapter Installation on a 1997 Ford F350The Hopkins Agility Brake Controller and Ford Adapter # HM47294 and # HM47715 comes with an adapter harness that will simply plug into the the port under the dash of your 1997 Ford F350 and then into the back of the brake controller and be ready to go. I attached an FAQ on brake controllers for you to check out also.
view full answer... - Will Hopkins Brake Controller Wiring Harness HM47715 Fit a 2013 Ford F-53 RV ChassisYes, you can use brake controller wiring harness # HM47715 on the 2013 Ford F-53 RV chassis. The factory connection point is located over near the emergency brake pedal under the dash. On this wiring harness, the white wire is ground, black is 12 volt power in, blue is output to trailer connector, and red is input from the brake switch. I cannot confirm if this set up will work with your US Gear (Unified Tow Brake) braking system.
view full answer... - Hopkins Agility Brake Controller Adapter For A 2017 Ford F53 We sure do, the Hopkins Plug-in Simple Brake Wiring Adapter part # HM47715 is a direct fit for both the Hopkins Agility Brake Controller part # HM47294 and your 2017 Ford F53. The factory plug will be located under the driver's side dash panel to the left of the steering column. I have also attached a photo to better illustrate this location.
view full answer...
- Where Does a Brake Controller Plug Into on a 1999 Ford F-53 Motor Home ChassisOn the 1999 Ford F-53 chassis the brake controller plug is located up under the dash behind the instrument cluster. It is not easy to get to. Take a look at the picture I have provided that points it out. It also could be tucked behind or taped to another harness in that general area. If the RV is a 1999 model year then it is possible that the F-53 chassis on it is a 1998. I cannot guarantee that the brake controller plug is present on a 1998 model.
view full answer...
- Which Wiring Adapter Do I Need For Hopkins Brake Controller Part # HM47294 on 2010 Dodge Ram LaramieThe correct wiring adapter you will need for your 2010 Laramie Dodge Ram Pickup with 7-way pre-installed is the Universal Brake Control Wiring Adapter, Dodge Ram, part # 3021-S, which fits 2010 Dodge Ram with factory 7-way. You will plug the connector of part # 3021-S into the port under the dash of your 2010 Dodge Ram, and the other end with the 4 wires will be wired to the wires coming out of the brake controller using butt connectors, part # 05732-2. The connector you referenced,...
view full answer... - Functions Of Red And Black Wire For Brake Controller Harness On 2001 Ford F-250For your 2001 Ford F-150,and the plug and play harness, part # HM47715, red wire is the input from the brake switch telling the control you are stepping on the brake pedal, and the black wire is supplying 12 volt power to the brake controller.
view full answer... - Pin Out of Brake Controller Connector on 2021 Land Rover Range Rover SportOther than some slight cosmetic changes, there haven't been any appreciable changes in the chassis of the Land Rover Range Rover Sport since the first model year of the 2nd generation in 2013. Tekonsha/Draw-Tite nor the rest of the companies have tested the pinout of the 2021 model, but there's no reason to believe it's been changed from the 2020 model. I've heard nothing that indicates the pinout of the 2021 is any different, but you can confirm this for yourself as described below. The...
view full answer...
- Installation Of Hopkins Agility Brake Controller # HM47294 On My 1992 Ford BroncoWhen installing the Hopkins Agility Brake Controller, part # HM47294, on your 1992 Ford Bronco, you will not need the Ford adapter, part # HM47715, as it is not compatible with your 1992 Ford Bronco. To install the Hopkins Brake Controller # HM47294 on your 1992 Ford Bronco, you will need to install a 4-Way Connector, the T-Connector Vehicle Wiring Harness, part # C55350, if you do not already have a 4-Way on your vehicle. You will need to use Brake Controller 7 & 4 Way Installation Kit,...
view full answer... - Wiring Harness for Installing Hopkins InSIGHT Trailer Brake Controller in 1999 Ford F-350If you are looking for a brake controller installation harness for the Hopkins InSIGHT Flex-Mount Trailer Brake Controller you can use their harness # HM47715 which is a direct fit for the 1999 F-350 that has a factory 7-way. The included video shows installation in a 2001 Super Duty. The photo shows the gray under-dash connector it plugs into. We also offer many types of trailer wiring harness for your 1999 Ford F-350. I included all of them on the linked page so that you can see them. If...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Alexander C
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James D.
1/7/2018
They work great with the brake controller thanks