Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. No external crossbar means that only the base plate tabs are visible. Simple bolt-on installation with included hardware.
Features:
Specs:
When you're not towing, the included tab covers provide a clean look for your car by covering the protruding brackets. They also keep dirt and debris out of the base plate tabs, and even act as a shin guard to help cusion the blow if you walk into the base plate tabs. These high-density polyethylene covers easily snap into place over each pull point when your tow bar is not attached.
If you have a tow bar from a different manufacturer, an adapter may be available. Demco makes adapters for use with other manufacturer's tow bars so that you don't have to go through the added hassle and expense of replacing your tow bar when outfitting your new towed car with base plates.
| Type of Tow Bar | Use Adapter |
|---|---|
| Roadmaster Eagle and Eagle 8000 | DM9523014 |
| Reese Tow Champ and Valley Industries | DM9523015 |
| Roadmaster Falcon 5250 | DM9523023 |
| Roadmaster Tracker, Falcon 2, Falcon All-Terrain, Blackhawk, Blackhawk All-Terrain, and Sterling tow bars with serial numbers up to 14,500 | DM9523036 |
| Roadmaster Nighthawk All-Terrain, Sterling All-Terrain, and Sterling tow bars with serial numbers 14,501 and above | DM9523062 |
Average Customer Rating: 4.8 out of 5 stars (207 Customer Reviews)
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. No external crossbar means that only the base plate tabs are visible. Simple bolt-on installation with included hardware.Excellent product. I mounted it on a 2016 Ford Fiesta ST and the pictures showed it being mounted below the bumper. On the ST model there is an intercooler which is in the way of doing this, I had to take the bumper off again, flip the base plate upside down (Demco said this was no problem) drill a few new holes, and mount it above the bumper.
tl:dr Do not mount below bumper on ST models, flip and mount above
First of all, this is a great product so far. We made a couple of trips, and this far surpasses a tow dolly. We live on top of a hill, and a 500 lb. Tow dolly was not easy to lower to street level in order to load it to the coach.
One caveat, though. This was not something the average consumer can mount on the toad easily. Fortunately, I found a shop willing to put it on our 2019 Ford Fiesta for about $300.00.
The base plates fit nicely but the covers are a poor fit. It would make sense to me that the covers covered the whole base plate.
Thanks, Randy
Received on time and installed as directed. I'm 78 and only had one problem, that of having to bend down a tab on the vehicle frame. Had to go buy a punch. However, the left base plate front holes for the tow bar attaching pin was not in alignment. The pin would not go through. Contacted etrailer and received a replacement in no time. Removed the bad one and reinstalled the new one. Then took the vehicle to my hitch guy for brake wiring. He double checked my work and said everything was in great order and a good fit. With the virus lockdown, I have not towed other than home from getting the brakes set up. But that worked ok.
Etrailer has proven to be the best place to purchase all my towing needs! They sent my first order very quickly. I decided to do a second order for another vehicle and again perfect service and top quality parts! The communication is A++++ and I highly recommend Etrailer.
Received shipment fast. I ordered the wrong adapters and call customer service right after delivery. Got excellent service from Brittany ordered the right adapter, got a return label while on the phone to my email. Installed the demco base plates with a few problems. Fit was tight but nothing a small mallet couldn't handle. They do mention in instructions that you may need to elongate one of the holes. Mine was for a 2016 GMC 2500. Definitely need to make hole bigger on the truck frame. I would do it before inserting the baseplate. Otherwise great product good tight fit.
It took closer to 5 hours by myself!! Actually fairly simple install. If I had another one to do now it would probably take 3 hours. Some of the bolts were a pain with my large hands. It only pokes out a little. Very happy with this hitch!!
Very high quality.
Very quick delivery.
Very good customer service.
I will order from etrailer again, I'm sure
easy to install on the truck frame and the removable arms help hide the base plate.
Towed our jeep 3,000 miles and this baseplate fit and worked very well.
Great service - ordered Sunday night, delivered Wednesday lunch time, installed Wednesday afternoon. Excellent information, instructions - took about 4 hours, had to file 2 bolt holes a slight bit, but the fit was very good.
I am very happy with the baseplate and would recommend it to anyone.
Before and after pictures attached.
Super Service and parts fit perfectly.
Very good quality.
Demco is a great product. This is the third baseplate we have purchased for different vehicles. All have fit perfectly. It took me 1.5 hours to install this one on our Fiat 500.
These base plates are AWESOME! They were very easy to install on my 2013 Ram 2500. I just removed the shackles that were there, and the base plates aligned to the existing holes perfectly. Connecting to the tow bar behind my RV was a simple and easy task. Make sure you use the Loc-tite that comes with the base plates on the new bolts. This will ensure you have a good strong tight bond. The plastic covers that come with the base plates are a good fit too. The only come off if you pull them off, plus they protect your knees if you happen to bump into the base plates by accident. This is an awesome product, I highly recommend.
Good service and bang on timely delivery, thanks
After reviewing the top name brands for tow bars I was really exited first with Roadmaster's pin style base plate connectors, but when I realized that it would require cutting and possibly drilling I took a second look and decided to install the Demco base plates and get the tow bar from them as well.
These plates can be installed in a mere 2 hours if you have all the tools ready to go. I have the fortunate luck that my truck is equipped with the air suspension and so lifting it to the highest setting and driving up on 12in ramps gave me ample amount of room to work under the front bumper area.
The installation is seriously easy and requires no special tools, other than a set of metric sockets and a torque wrench. The factory tow hooks are removed and these base plates fit in the exact same space without any cutting, not even the plastic cover behind the pumper needed to be removed (though for some odd reason the instructions did and I followed them on the driver side but when I realized that I could install the plate without this step, I omitted it on the passenger side). Despite my initial worry of wanting a nearly invisible look, these bars are remarkably clean looking.
Very happy with this. It shipped fast a lso.
Received my H3 Hummer baseplates and towing lights diode kit. Haven't installed yet but when it's done I hope to submit pics.
Dealing with etrailer has always been nothing short of outstanding. Always rapid delivery of great parts and excellent prices. Thanks once again etrailer.
Fast delivery and great price. Replaced an old Roadmaster baseplate (which was a shin-getter) for my Saturn Vue, with a Demco baseplate. Fits perfect! New baseplate is barely exposed to my shins. Directions were very clear, and I installed it in about 2 hours. It even came with the thread lock required. etrailer communicated every step of my shipment, even following up after delivery.
it bolted right on . works great
I can only comment on how fast the shipping to Canada!! It was awesome!!! Tks
I installed this base plate on my 2006 z71 crew cab 1500. It works perfectly to flat tow our truck anywhere we want to go.
One year follow up....
The Demco unit is a solid base plate overall. Basemount mounting holes are slightly off compared to the frame which made installation slightly difficult, however, not too difficult to rectify. Unit works well with just over 3000 miles in the past year.
I am very pleased with this base plate , it installed with very little effort . The only issue I had was that it was delivered to the wrong address . The shipping label was for another address and with much effort we found it .
But with that I will still purchase from etrailer in the future .
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.