CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
(46 reviews)
Price: $16.06
In Stock
CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
Item # CE26212G
Retail:$17.88
Our Price: $16.06
You Save: 10%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (46)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE26212G
- Steps
- 15-1/4 Inch Long
- 3 Inch Wide
- CE Smith
This steel fender step provides easy access to the bed of your trailer from the side. Bolt it or weld it onto your fender, or bolt it directly onto your trailer's frame. Galvanized steel construction is durable and corrosion resistant.
Features:
- Creates sturdy step near the fender for easy side access to your trailer
- Constructed of durable, corrosion-resistant, 12-gauge galvanized steel
- Bolts to your trailer's fender or your trailer's frame
- Fits the driver's side or passenger's side of your trailer
- Can be mounted on the front or the rear of your trailer fender
- Hardware sold separately
- Made in the USA
Specs:
- Dimensions: 15-1/4" long x 3" wide
- Mounting slots for attaching to fender: 1-1/2" long x 7/16" wide
- Mounting slots for attaching to frame: 2-15/16" long x 9/16" wide
- Wiring hole diameter: 9/16"
- Quantity: 1 step
Mounting the Step
Mounting the fender step is easy. To mount the step to your trailer's frame, use the mounting slots on top (2-15/16" long x 9/16" wide). Just attach the step with a 9/16" or 1/2" diameter U-bolt (sold separately). The slots allow for U-bolts of varying sizes so that you can use this step on a trailer with a narrow frame or a wide frame.
The mounting slots on the side (1-1/2" long x 7/16" wide) are for mounting the step to your fender. When mounting to the fender, drilling will be required and hardware is not included. The 9/16" hole in the side of the step allows you to run wiring for your trailer tail light, if you choose to keep it near the frame of the trailer.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
26212G CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1 - CE26212G
Average Customer Rating: 4.8 out of 5 stars (46 Customer Reviews)
This steel fender step provides easy access to the bed of your trailer from the side. Bolt it or weld it onto your fender, or bolt it directly onto your trailer's frame. Galvanized steel construction is durable and corrosion resistant.by: Phil08/14/2016
Did the trick! I had to drill new holes to mount the fender but it worked great on my old magliner trailer.
by: Jonathan09/21/2021
Materials and coating were nice. The holes designed for the square bolts attachment to trailer frames are pretty generic, so will work with lots of frame sizes. My frame is 3.5" x 1.5" so they extend a little bit inside, but ok. I was able to drill holes for fender mounting bolts on the other side easily enough. They are barely wide enough for two bolts, so I had to be very careful to make it work. Photos are after a week driving in Northern Michigan, so sorry about the dust.
by: Dean06/22/2021
Great service. Shipped quicker than I expected. Exactly what I ordered. I painted and installed on boat trailer perfectly.
by: Larry05/24/2023
Very good quality and works as advertised. Great ordering and service from Etrailer!
by: Gary03/28/2020
Ordered 4 of these brackets for my trailer.
LoadRite doesn't have replacement parts for my trailer any longer.
etrailer was the only place that had the 15 1/4" size I needed.
They arrived exactly when they said they would.
They fit perfectly.
I couldn't be happier.
Thank you etrailer.
Gary S.
3/31/2021
Perfectly....like they were just put on. Still look and work as good as the day I got them.
by: John 06/09/2023
Works great no issues
by: Cal G.10/21/2017
I bought 4 of these to support a 1' x 3' platform alongside the tongue of my boat trailer. Needed to buy 1/2" x 3 1/16" x 6 5/16" square u bolts made by Seachoice to anchor to my 3 x5 trailer tongue. Really worked great as I can stand on the platform and winch boat onto trailer and stay dry.
by: Jayson 05/21/2023
Parts look very durable....
Also arrived faster than expected
Great job!
by: Jonathan10/28/2022
Worked great - solid metal easy to add to my trailer
by: H04/17/2020
Held up the step on the trailer that had rusted support
by: Tim11/18/2021
I was sent a used or dry fitted part , that another customer returned . Part was bent and had marks from washers being overnighted
Sierra K.
11/20/2021
Customer Service will reach out to you.
by: Ruben P08/05/2017
The product is outstanding. It is by far better than the 0ne that came on the trailer.
by: Dwight04/05/2018
The tires where shipped as the shipment date stated and was package well with no damage. On the other hand the fender was a little bigger than the original one that came with the boat and the foot plate is not as wide as the original. Over all the product was ship on time and work fine .
by: Luis 11/05/2021
Perfect design for fender mounting. Solid, sturdy and good galvanized finish.
by: mumminator06/15/2017
Works great. They had a thick coat of galvanizing on them so looking forward to them working for a long time.
by: Ronald05/14/2019
Haven't installed yet but looks like it will fit my needs. Good quality for the price. Note that the sides are angled inward and not a right angle to the top portion of the plate. That won't affect my install but it wasn't obvious to me when I looked at this online.
by: Gerald 01/31/2022
I ordered the part and it showed up.
by: David 09/02/2022
Perfect fit, fast shipping
by: Walter 07/04/2021
Order was shipped earlier. Everything was in great condition when I installed my fenders it all bolted right up perfect fit.
by: Nathon02/06/2024
by: James 02/12/2024
by: Patrick 01/01/2024
by: Ryan 07/17/2023
by: Craig05/07/2024
25
46
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Parts Needed to Install the CE Smith Single Axle Trailer Fenders w/ Top and Side StepsTo install the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps # CE19503-2 you need 4 of the CE Smith Galvanized Steel Step # CE26212G. The mounting hardware isn't included because every trailer design is different so you can either use U-Bolts or mounting hardware to bolt it directly to your trailer frame.
view full answer... - Trailer Fender And Fender Steps For A 1975 Murray Boat Trailer With 13" WheelsFor your 1975 Murray trailer, you'll want to use the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps # CE19503-2 which is designed to fit 13" wheels and measures 29-3/4" for the inside portion, and 33-3/4" for the outside portion. Since you mentioned that your slipper springs are 27" from bolt to end of springs, these will not pose an issue for your springs. The CE Galvanized Steel Step # CE26212G should not cause an issue since these will mount underneath the steps on the...
view full answer... - Mounting Bracket Recommendation to Use with CE Smith U-BoltI prefer the longer mounting slots of the CE Smith Galvanized Steel Step # CE26212G for use with the U-bolt kit part # CE15288GA as that will give you a bit more flexibility in where the fender installs on the trailer frame.
view full answer... - Recommended Mounting Bracket For CE Smith Fenders CE19502-2The brackets you will need for your CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2 # CE19502-2 will be the CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1 # CE26212G. You will need U-Bolts, like the # CE15284GA, to attach the brackets to the frame, but you should be able to reuse the rest of the hardware you currently have.
view full answer...
- U-Bolts Needed To Attach The CE Smith Galvanized Steel Step # CE26212G Onto A Trailer FenderWhen it comes to installing The CE Smith Single Axle Trailer Fenders # CE19502-2 you will need both The CE Smith Galvanized Steel Step # CE26212G and The CE Smith U-Bolt - Galvanized # CE15284GA. The bracket has a galvanized steel that helps resist rust and corrosion, and is suitable for saltwater exposure. The items listed above will make your trailer look like new. I attached a review video link below.
view full answer... - Will CE Smith Galvanized Steel Step for Trailers fit Different Sized Trailer FramesThe CE Smith Galvanized Steel Step for 2 Inch Trailer Frames # CE26212G-15284GA is only for 2 inch frames because it includes the U-bolts to mount the step. What you can do instead is purchase the step on it's own, # CE26212G, and then purchase the U-bolts you need to fit your trailer. As long as the bolt is 9/16 or 1/2 inch diameter it will work in the slotted mounting holes.
view full answer... - Could CE Smith Galvanized Steel Step # CE26212G-15284GA Be Used on 3 inch Wide FrameWhat you can do instead is get the # CE26212G, and then purchase the U-bolts you need to fit your trailer. We don't have any for a 3 inch frame width, but as long as the bolt is 9/16 or 1/2 inch diameter it will work in the slotted mounting holes.
view full answer... - Is There a CE Smith Trailer Fender Step Mount Bracket Wider Than 3?I have a different product that may help you as the CE Smith Galvanized Steel Step # CE26212G at 3" wide is the widest that CE Smith makes. The HitchMate Boat Trailer Step # HE4036 has a 9" long by 5" wide step pad. It also uses a non-slip step surface to reduce the risk of sliding off the step. This step will bolt to trailer frames up to 3" wide and 5" tall.
view full answer... - Recommended Mounting Brackets for CE Smith Single Axle Trailer FendersTh fender mounting brackets we offer designed for the CE Smith Single Axle Trailer Fenders like part # CE19504 is the CE Smith Galvanized Steel Step for Trailer Fender part # CE26212G. The slots in the top will attach to the frame using u-bolts (not provided) and then you will drill new holes into the top plate to line up with the holes on the bottom of the fender once in position.
view full answer... - Steps For Mounting To a Trailer TongueWe do have the HitchMate Boat Trailer Step # HE4036 which will fit up to a 3" wide and 5" tall trailer tongue. If you have a taller frame on your trailer we do have the Step # CE26212G which is typically used when mounting a fender. You will need to source the correct size U-Bolt for your frame and some Non-Skid Tape # A10-2260 to prevent slipping on the step.
view full answer... - Availability of Metal Trailer Wheel Step with U-Bolts I may have a solution for you, however we don't have a metal plate available with pre-drilled holes that are spaced to match the Redline Square U-Bolts # 382144UB. If you are looking to attach a step to the fenders on your trailer we do have the CE Smith Galvanized Steel Step # CE26212G-15284GA that's designed for a 2 inch wide frame. This kit consts of a 12-gauge galvanized steel step that will connect to the frame via the included U-bolt and attach to the fender to provide you with...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
Amanda M
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Phil
11/16/2017
Its still working fine