bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C87WR
Retail:$325.95
Our Price: $228.07
You Save: $97.88
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 29 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C87WR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (130)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C87WR

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 525 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 525 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13487 Curt Class 3 Trailer Hitch Receiver

Installation Details C87WR Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C87WR

Average Customer Rating:  4.7 out of 5 stars   (130 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

excellent hitch! Install was easy. Just a little tight to mount on the drivers side. Had to wiggle it and use a little persuasion to get it in. ( see photos ) The only other problem was the rear kick feature for the rear hatch door. It worked fine with the hitch installed but no longer works after I installed the trailer wiring harness. I thinks its because of the 4 way flat trailer connector and the green tail light wires that run underneath the bumper. I believe they are causing interference.

Sal

4/28/2023

Product is still functioning properly. The harness wires cause some interference when trying to open the rear hatch door with the kick feature.



by:
2024 Mitsubishi Outlander

This is the 4th Class III Curt hitch purchased in the past 10 years from etrailer. We currently have Curt hitches on a 2020 Ford Explorer and a 2024 Mitsubishi Outlander. We use this hitch with a Hollywood Racks bike rack for 4 bikes, also purchased from etrailer. We also HAD Curt Class III hitches on a 2011 Dodge Nitro and 2015 Mitsubishi Outlander Sport and never had any issues or trouble after thousands of miles of use. Curt hitches are highly recommended for those who buy SUVs that do not come standard with a Class III hitch. A+++



by:

THE PRODUCT ARRIVED WITH NO BEND AREAS BUT THE PACKAGE CAME HORROBLE BROKEN AT EVERY CORNER AND WAS ABOUT TO COMUNICATE WITH YOU DID NOT SEE INSTRUCTIONS AND THE SCREWS I NEED A REPLACEMENT TOOLS AND INSTRUCTIONS

Etrailer Expert

Jenny N.

7/15/2023

Oh my! I will have our Customer Service team reach out to you.



by:
2023 Mitsubishi Outlander

Received this today. Packaging was torn up and not sufficient for shipping. Once I received it I went straight to install. It took approximately 30 minutes and that included time to find tools and put them away. One thing is that the driver side is extremely tight. I had to remove the muffler bracket to have room to slide receiver into place. Might have taken an extra minute but saved probably 10 minutes. Overall it is an exceptional product and I would order it again.



by:

Great product. Very satisfied even after one year of ownership. If you’re on the fence about purchasing go for it.



by:
2023 Mitsubishi Outlander

Fast delivery! Everything was in good condition. Highly satisfied with the order and service=). Perfect fit on our mitsubishi outlander 2023. Thank you very much!



by:
2022 Mitsubishi Outlander

I managed to install this by myself by using two sepeLOL. floor Jack's. The bolt holes lined up perfectly. I would recommend this to others. I am not a mechanic, just a weekend warrior Lol.



by:
Mitsubishi Outlander

Installed perfectly on my 2023 Mitsubishi Outlander PHEV. Did not need to remove the exhaust to install the driver's side. To install the passenger side, I had to remove the obstructing pump and pump bracket, which I think are electric powertrain components specific to the PHEV models. After removing those it was no trouble to get the 3/4" rachet wrench on the bolts to tighten them.

Post install hitch looks great and feels super solid. Stoked on this purchase!



by:

Awesome service with speedy shipping. The hitch mounted up without any issues.



by:

Hitch is very well built. This was a great price for this product as I searched several places and etrailer has everyone beat. The website is very user friendly and selecting the correct hitch was simple.
Installation was fairly easy as others mentioned. I would definitely recommend 2 people to install. I did not have to lower the exhaust, though that may have made it simpler. You will want to install the drivers’ side first as you have to snake around the exhaust without damaging it and may have to use a rubber mallet on the hitch to get the holes to line up as it is a snug fit. The bolts are fairly easy to access on both sides.
The hitch fits great avoiding all the extra body pieces and parts and has a very low profile. The “hands free” trunk sensor was partially obstructed, but still works fine. You may have to turn off your rear sensors once you place a cargo basket or bike rack on as it will beep non-stop.
Definitely recommend!



by:
Ford Edge

The trailer hitch was delivered exactly on the date expected, and installed the next day. It fit like a glove and was very easy to install, even for a guy like myself with no mechanical experience. With the help of a friend to more easily hold the bar in place while installing, it fit in there pretty snug. We had to use a small pry-bar to get it over the edge on one side, but it worked really well. You could maybe muscle it up there, but the pry-bar made it much easier. The bolts screwed in easily as well. Overall install took about 30 minutes or so, mostly just screwing in the 6 bolts. Used it immediately with a new trailer hitch mounted cargo carrier and that fit perfectly. Excellent price and easy to install!



by:
2023 Mitsubishi Outlander

Fit perfectly, I actually have a 2024 mitsubishi outlander se, I called the manufacture to see if the 2023 would fit. The numbers were the same. I actually didn't have to drop the exhaust. If you turn it just right with two people it will slide up in. Package was Gamache from shipping some scratches but hitch was fine.
Quinn helped me when ordering wonderful experience.



by:

Item arrived fairly fast like within 2 days. The item was not damaged although the Box did have a hole in it from the weight of the receiver which is kind of to be expected all of the bolts and hardware and instructions were there it was very easy to put on took me about 30 minutes and you do not have to drop the exhaust you just have to put the left side on first over top the exhaust and then the right side you just have to use a little bit of strength and push it up on there so you can get the bolts then once that's done the six bolts go in Fairly easily and the hitch is on and working perfect. Thank you etrailer for allowing me to order this part as the dealer wanted $1,500 for a new one which was basically the same. I would say difficulty in installing was just a matter of getting up under your vehicle if you can jack one side up or the other or the back and put jack stands that makes it easier I was able to lay on the ground and do it myself without a problem helps to be a little bit flexible. I would say pretty much anyone could put that hitch on it's very simple. Thanks again and I will order more products from you in the near future. Move on to something else

Michael

3/13/2023

Still as good as new working perfect and I have not had any problems with it. Thanks again for the customer service and the follow-up and the quality product that I purchased.



by:

Hitch was easy to mount in 1h on 2023 Outlander PEHV 40thEd. No need to drop the exhaust just unscrew the pump on the other side (2 screws cups).Easy access from the floor no need to lift the car. Kick feature for the rear hatch door run good on both sides of the center of the hitch (kick no swipe!).



by:

Refer to prior review where I listed my opinion on all of the items I purchaseed



by:
2022 Mitsubishi Outlander

Curt makes a nice hitch. I’ve bought a few. First purchase from etrailer. They seem like a good company. Easy to deal with.
Shouldn’t be to hard to install.

Richard

4/23/2023

Hitch was easy to install and works well. It does partially block the hands free lift gate sensor, but not a big deal. I bought the factory wiring harness and that was time consuming to install.



by:
2024 Mitsubishi Outlander

Fast shipping, we haven’t installed it yet but the shipping g experience was excellent!



by:
2022 Mitsubishi Outlander

Greetings; I just received the order, but it arrived with scratches and bumps. Likewise, the box presented the blows that he had suffered during the trip. For my part, I think that in the end they put a lid on it so that the box could reach its destination. What can I do about respect? I attach photos of evidence.

José S.

4/1/2023

Si bad…

Jose S.

4/1/2023

No good.



by:

Box is damage parts. Parts of the hitch broke through. There is some scratches and paint gloss. I haven’t taken a completely out of the box yet tomorrow I just installed and we’ll see if there’s any other damage.



by:

great product.A little difficult to ins tall



by:
2022 Mitsubishi Outlander

Le quedó exacto al chasis y luce bien cubierto el tubo



by:

It works great! Easy install and no issues at all!



by:
2022 Mitsubishi Outlander

Receive the wrong item. I ordered a trailer hitch and the tail light converter. I received 2 tail light converters and not the trailer hitch even after I called to resolve this matter. It’s over a month now and still don’t have the trailer hitch.

Etrailer Expert

Jenny N.

11/21/2022

We recently sent you a new hitch and were wondering if you had any feedback about the product for other shoppers?



by:

It looks a great product. However I have not yet install it on my outlander.

The package could be better. Even the box had holes, product didn’t damage.

Last thing, 15 mins after I received the product Carol sent me an email and asked me to review. Carol this is called bullying!!! You should give time to your customers and if they want, they’ll review.

Etrailer Expert

Katrina D.

8/25/2023

I am sorry if that made you uncomfortable. We have an automatic email that sends out once we get a notification that your package has arrived. You can always wait to respond till after you have installed the product.



by:

Excellent product, I received it sooner than expected, I installed it right away. Probably the easiest hitch I have ever installed. I think in the past customers complained about packaging and received scratched hitches, etrailer must have listened, this one was boxed up with extra protection in all the right areas, not a mark on it!!! Flawless!!! Thank You!!!

Lee

12/1/2022

Perfect, absolutely satisfaction!!!


25
130
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Trailer Hitch & Wiring Harness Fit For 2024 Mitsubishi Outlander
    We do have a trailer hitch receiver and wiring harness that fits your 2024 Mitsubishi Outlander (non-PHEV), which are the following: - Curt Trailer Hitch Receiver # C87WR - T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C43WR I verified these fits directly with the manufacturer for you.
    view full answer...
  • Will Curt Trailer Hitch C87WR On 2022 Mitsubishi Outlander Work W/ Hands Free Lift Gate Sensor?
    I reached out to my contact at Curt and the Curt Trailer Hitch Receiver # C87WR you were looking at for your 2022 Mitsubishi Outlander will partially block your hands free lift gate sensor, but it will still work. You will just need to place your foot on either side of the receiver and move it in and out until you find the sweet spot for the sensor. After a few times it will be come second nature as to where to place your foot. If you can tell me what you are planning on using your trailer...
    view full answer...
  • Will The Curt Trailer Hitch Receiver # C87WR Fit 2022 Outlander, Outlander Sport and Outlander PHEV
    The Curt Trailer Hitch Receiver # C87WR will fit all trim levels of the 2022 Mitsubishi Outlander. Since The Outlander Sport and Outlander PHEV are different models this receiver will not work on those vehicles. The Curt Trailer Hitch Receiver # C13398 is the last hitch we have confirmed to fit the Outlander PHEV and it fits the 2018-2020 model years. The Curt Trailer Hitch Receiver # C13079 is the last hitch we have confirmed to fit the Outlander Sport. It fits the 2011-2021 model years.
    view full answer...
  • Trailer Hitch Receiver and 4-Way Wiring Harness For a 2023 Mitsubishi Outlander PHEV
    For your 2023 Mitsubishi Outlander PHEV you will need the Curt Trailer Hitch Receiver # C86FV. This has a different mounting bracket on the passenger side of the frame than the Receiver # C87WR you found which does not fit the PHEV. I recommend installing the T-One Vehicle Wiring Harness # TK46VR when you install the receiver. This will give you a 4-way flat connector for connecting to most small trailers you might pull as well as Auxiliary Lights # C53201. The auxiliary lights are needed...
    view full answer...
  • Recommended Hitch for a 2022 Mitsubishi Outlander
    Not really but it depends on your skill level. The hardest part of installing the Curt Trailer Hitch item # C87WR is going to be loosening the rubber pieces that attach the mufflers to the hangers. Other than that you'll just need a socket set to bolt the hitch on. The hitch weighs 29 lbs so you'll want to have someone help you hold it up while you install the bolts. I have linked the instructions below so you can take a look at them and see if this is something you are comfortable tackling...
    view full answer...
  • Trailer Hitch & Wiring Harness For 2024 Mitsubishi Outlander
    There is both a trailer hitch receiver and wiring harness that fits your 2024 Mitsubishi Outlander (so long as it is not the PHEV model). What you need is the following: - Curt Trailer Hitch Receiver # C87WR - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C43WR
    view full answer...
  • Recommended Hitch for a 2024 Mitsubishi Outlander ES
    Sorry but no! The only hitch available for the 2024 Mitsubishi Outlander ES is the 2" Curt item # C87WR you were looking at. If you are wanting to use 1-1/4" accessories with this hitch all you will need is the Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver item # e63YR. This inserts inside the 2" receiver and allows you to mount 1-1/4" accessories like bike racks and cargo carriers. It is not an adapter so you will not lose any tongue weight capacity or violate your accessories...
    view full answer...
  • Will the Draw-Tite Hitch # DT97GR Fit My 2022 Mitsubishi Outlander?
    I have a great hitch that will fit your 2022 Mitsubishi Outlander. Unfortunately, I confirmed with Draw-Tite that the Draw-Tite Max-Frame Trailer Hitch # DT97GR will not fit your vehicle. However, we do carry a great alternative that will fit: the Curt Trailer Hitch Receiver # C87WR. The Curt hitch will provide you with the same 525 pound maximum tongue capacity and the 3,500 pounds of gross trailer weight capacity as the Draw-Tite. You also receive the benefit of the Curt hitch being produced...
    view full answer...
  • Trailer Hitch Receiver and 4-Way Wiring Harness For a 2023 Mitsubishi Outlander
    You will need the Curt Trailer Hitch Receiver # C87WR for your 2023 Mitsubishi Outlander. This receiver is custom fit for your Outlander and requires no drilling for installation. It will bolt in place on your frame using factory holes. The Curt Powered Tail Light Converter # C59236 will allow you to add a 4-way wiring harness. This will operate the tail lights on most small trailers you may tow. It will also allow for Auxiliary Lights # C53201 if you are using a hitch mounted accessory...
    view full answer...
  • Trailer Hitch Receiver Compatibility With Hands Free Liftgate On 2022 Mitsubishi Outlander
    The Curt Trailer Hitch Receiver # C87WR for your 2022 Mitsubishi Outlander will not prevent your hands free liftgate from opening. You will have to perform the kick motion to the side of the receiver as it will not see your foot under the receiver tube itself. I recommend installing the T-One Vehicle Wiring Harness # TK46VR when you install the receiver. This 4-way connector will attach the lighting of most small trailers you may tow and will also allow for Auxiliary Lights # C53201....
    view full answer...
  • What Hitch Receiver Do You Recommend for My 2022 Mitsubishi Outlander?
    Yes! We do have a hitch available for your 2022 Mitsubishi Outlander. For a great hitch option, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C87WR. The Curt hitch provides 525 maximum tongue weight capacity and 3,500 pounds of maximum gross towing capacity. In order to make sure that your vehicle can accommodate this much weight, I recommend confirming with your owner's manual. Also, if you have a hands-free hatch sensor, this hitch will work with the sensor...
    view full answer...
  • Hitch Confirmed to Fit a 2022 Mitsubishi Outlander
    Yes, the Curt Trailer Hitch Receiver # C87WR is confirmed to fit all models of the 2022 Mitsubishi Outlander. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. To round out a towing package for your 2022 Mitsubishi Outlander you can pick up the T-One Vehicle Wiring Harness # TK46VR and the etrailer Ball Mount...
    view full answer...
  • Does Curt Trailer Hitch For 2022 Mitsubishi Outlander Block Kick Sensor
    The kick sensor will still be completely functional on your 2022 Mitsubishi Outlander when installing the Curt Trailer Hitch Receiver # C87WR. You will not need to drill any holes, the only thing that you'll have to do is kick your foot to either side of the receiver portion of the hitch instead of the 2 inch area where the receiver is, but the # C87WR will absolutely work properly. The only other thing I wanted to mention, in case you were going to use this hitch for towing, is that...
    view full answer...
  • Does Curt Trailer Hitch For 2022 Mitsubishi Outlander Have Enough Tongue Weight For 4-Bike Rack
    Yes, you will absolutely be able to carry a 4-bike rack on your 2022 Mitsubishi Outlander with the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver # C87WR The 525 lb tongue weight of the # C87WR is enough to handle any 4-bike rack and its bikes, even the ones that weigh the most and have the most capacity. For example, the heaviest you can get is the 291-1/2 lb total (91-1/2 lbs for the rack and 50 lbs per-bike) of the Hollywood Racks Sport Rider...
    view full answer...
  • Recommended Hitch And Wiring For A 2022 Mitsubishi Outlander
    The Tekonsha T-One Vehicle Wiring Harness # TK46VR designed for your 2022 Mitsubishi Outlander will be a separate part needed and will not be included with a hitch. However, this is a plug and play harness and will be a quick and easy install, though one wire will need to be run to the battery for needed power. If you have not decided upon a Hitch yet, the American made Curt Class III Hitch # C87WR available that is also designed specifically for your vehicle is highly recommended. This...
    view full answer...
  • Recommended Trailer Hitch Receiver and 4-Way Wiring Harness For a 2023 Mitsubishi Outlander
    I recommend using the Curt Trailer Hitch Receiver # C87WR on your 2023 Mitsubishi Outlander. This is custom fit for attaching to your frame and uses a 2" receiver to offer a greater selection of hitch mounted accessories and ball mounts. You will want to install the Curt Powered Tail Light Converter # C59236 when you install the receiver. This will give you a 4-way flat wiring connector which is the most common connector used on small trailers. It will also allow for Auxiliary Lights...
    view full answer...
  • What is the Best Hitch for a 2023 Mitsubishi Outlander?
    The best hitch for your 2023 Mitsubishi Outlander is the Curt Hitch item # C87WR. This hitch is custom fit and bolts to your Outlander with included hardware. It has been confirmed to fit all models of the 2023 Outlander whether you have the Sport or not. It is a class III hitch with a 2" receiver that has a 525 lbs maximum tongue weight and a 3,500 lbs towing capacity. For a e-bike capable bike rack, I recommend the Hollywood Racks Destination E Bike Rack item # HLY66ZR. This frame mounted...
    view full answer...
  • Trailer Hitch Receiver and 4-Way Wiring Harness For a 2023 Mitsubishi Outlander
    As the 2023 Mitsubishi Outlander is unchanged from the 2022 you will be able to use the Curt Trailer Hitch Receiver # C87WR. The T-One Vehicle Wiring Harness # TK46VR will provide you a 4-way flat connector. This is the wiring commonly used on most small trailers. It can also be used for Auxiliary Lights # C53201 in the event your hitch mounted accessory impairs the view of your tail lights.
    view full answer...
  • Is Drilling or Trimming Needed to Install Curt Trailer Hitch on 2022 Mitsubishi Outlander
    The installation is really simple, and does not require you to do any type of drilling, or do any trimming of the bumper or any fascia when installing the Curt hitch that fits your 2022 Mitsubishi Outlander, which is the following part: - Curt Trailer Hitch Receiver # C87WR To install this hitch on your '22 Outlander, literally all you have to do is lower the exhaust and bolt the hitch on with the included hardware and that's it! So the Curt # C87WR is a great choice, not only for the...
    view full answer...
    Image 1 for
  • Is the Curt Trailer Hitch Receiver a Fit for a 2023 Mitsubishi Outlander SE AWD
    The Curt Trailer Hitch Receiver part # C87WR is a confirmed fit for a 2023 Mitsubishi Outlander SE AWD. This is an excellent bolt-on option that provides you with a class III capacity and 2" opening which is good for use with bike racks and cargo carriers or towing if needed. It features a simple bolt-on install. Please note, if you are towing you'll also need a few other items like the T-One Vehicle Wiring Harness part # TK46VR and Curt Towing Starter Kit part # C45534.
    view full answer...
  • Recommended Trailer Hitch and Cargo Carrier for a 2023 Mitsubishi Outlander
    In order to use a cargo carrier like the Flint Hill Goods 60" x 22" Cargo Carrier part # FHG49ZR on a 2023 Mitsubishi Outlander you just need a trailer hitch. I recommend the Curt Trailer Hitch Receiver part # C87WR as it is a bolt-on fit. The Flint Hill Goods 60" x 22" Cargo Carrier requires a 2" receiver and that's exactly what the Curt Trailer Hitch Receiver has so there will be no issues. The weight capacity of the hitch (525 lbs) also exceeds the weight capacity of the carrier (500...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.