Trailer Hitch Receiver and 4-Way Wiring Harness For a 2023 Mitsubishi Outlander

Question

Question:

Looking for a trailer hitch for 2023 Mitsubishi outlander !

asked by: Lonnie E

0

Expert Reply:

As the 2023 Mitsubishi Outlander is unchanged from the 2022 you will be able to use the Curt Trailer Hitch Receiver # C87WR.

The T-One Vehicle Wiring Harness # TK46VR will provide you a 4-way flat connector. This is the wiring commonly used on most small trailers. It can also be used for Auxiliary Lights # C53201 in the event your hitch mounted accessory impairs the view of your tail lights.

expert reply by: Bud M

0

Answer 1

Aftermarket hitches often have a max gross trailer weight and tongue weight that exceeds what the vehicle is capable of. You will always be limited by the lowest towing capacity whether that is the hitch or your 2023 Mitsubishi Outlander PHEV. A…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver #C87WR will fit all trim levels of the 2022 Mitsubishi Outlander. Since The Outlander Sport and Outlander PHEV are different models this receiver will not work on those vehicles. The Curt Trailer Hitch Receiver #C13398…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver part #C13293 and the Draw-Tite Trailer Hitch Receiver part #76023 are both excellent options for a 2020 GMC Acadia. That said, there are some distinct differences. The Curt hitch (see photo one) hangs below the rear…

view full answer...

Answer 4

The T-One Vehicle Wiring Harness #TK46VR is confirmed to fit your 2023 Mitsubishi Outlander per the manufacturer. I like the T-One harness over the other harnesses because it has a more reliable powered converter box that will give you a longer…

view full answer...

Answer 5

Yes, the Curt Trailer Hitch Receiver #C87WR is confirmed to fit all models of the 2022 Mitsubishi Outlander. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver part #C87WR is a confirmed fit for a 2023 Mitsubishi Outlander SE AWD. This is an excellent bolt-on option that provides you with a class III capacity and 2" opening which is good for use with bike racks and cargo…

view full answer...

Answer 7

Yes, we do have a hitch that will work for your 2022 Mitsubishi Outlander. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item #DT78GR. This hitch has a square crossbar that mounts close to your rear bumper for better concealment. It is custom…

view full answer...

Answer 8

The Tekonsha T-One Vehicle Wiring Harness #TK46VR designed for your 2022 Mitsubishi Outlander will be a separate part needed and will not be included with a hitch. However, this is a plug and play harness and will be a quick and easy install, though…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...