Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(88 reviews)
Price: $185.31
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C76WR
Our Price: $185.31
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (88)
- Q & A (0)
- Photos
CURT Trailer Hitch - C76WR
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- No Cross Tube
- CURT
- 350 lbs TW
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13493 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2021 - 2024 Ford Bronco
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C76WR
Average Customer Rating: 4.8 out of 5 stars (88 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Robert07/24/2023
2023 Ford Bronco
Very durable, easy install. My wife (her Bronco) did the install and I helped (she didn't know how to use a torque wrench). Task was complete in under fifteen minutes. Over fifty percent savings compared to buying from Ford.
by: J C04/12/2024
Pretty easy to install. Has never loosened.
I use it for a bike rack on our Bronco.
by: Rik10/14/2021
Super easy install (like 5-10 minutes) and very high quality. I did not torque to the recommended value because the frame is boxed and it did not appear to have sleeves, but all I will be doing with the hitch is hauling bikes and using a Twistep dog loading device.
by: Craig 04/28/2024
Easy installation.
by: Brian03/19/2023
A quality trailer hitch from Curt and eTrailer.com. Easy to install on my '23 Ford Bronco
by: Bruce 10/19/2022
2022 Ford Bronco
Nice welds and good finish good hardware. Fit perfectly. Simple, clear instructions, took less than 15 minutes to install.
Shawgo, L.
10/20/2023
Still looks good, finish is still perfect.
by: David03/27/2023
2023 Ford Bronco
Incredibly easy to install, had my bike rack on in no time!!
by: John09/05/2023
2023 Ford Bronco
The hitch is very well-made. It arrived quickly and was easy to install. This will be perfect for pulling our JetSki behind the BRONCO.
by: J11/10/2023
Installation instructions were simple and clear and first impression regarding quality is very positive.
by: Jamie 09/20/2023
Ford
Hitch arrived quickly and was very easy to install on my Ford Bronco. Additionally, the price was half of what the Ford hitch would’ve cost. Couldn’t be happier with the purchase.
by: Thomas09/11/2023
the hardware to install was missing from package
Brooke M.
9/15/2023
Thank you for letting us know about this! I see that our customer service team is sending out the missing hardware. I am sorry you had to wait even longer to be able to use the hitch.
by: James02/22/2022
2021 Ford Bronco
The Curt trailer hitch receive works like a champ.
The wiring kit however does not work on non-led Broncos (base models like Big Bend) without some modification. I'm attaching a link to a [online] video that shows how to make it work. I did it b and I'm good to go.
James
2/23/2023
Great.
by: Tom 04/17/2024
Heavy duty. Easy install
by: Adam 08/11/2023
Price was great and installation was super easy. Never had an issue each time we’ve used it. Great product.
by: Dan 08/06/2023
Easy installation, quality hitch, looks great, all the hardware was correct.
by: Luke 08/09/2023
Easy installation. Great customer servi ce.
by: David 07/15/2023
2021 Ford Bronco
Looks good, install instructions were spot on. Thx
by: Miguel 01/09/2023
2022 Ford Bronco
Easy to install, great instructions and really appreciate the follow-up from e-trailer. This is the second hitch I've purchased through e-trailer, and they did not disappoint!
by: Scott 08/15/2023
Ours was easy to install and has worked well for over a year. Thanks
by: Mark 08/09/2023
It is a good product and easy to instal l.
by: Marcus12/02/2022
etrailer has always been a great resource. Have not had issues in past. The part/item number they assigned the hitch I bought did not align with what was delivered. The price was almost $[XX] more than other vendors. Quite disappointing and not what I’ve come to expect from this company. Returning product on principle despite being charged for shipping.
by: Philip 08/09/2023
works perfectly!
by: Kenny 09/22/2023
.
good folks good product very sATIS FIED
by: Phillip04/17/2022
2022 Ford Bronco
I’m satisfied with my recent purchase of a Curt trailer hitch receiver for my new Ford Bronco. It fit the Bronco’s frame very well and we used the existing bolt holes with no modifications required to hitch or frame. The bolts provided were too long for my model. So I replaced them with the appropriate length bolts during installation. I could have used the existing bolts with washers for spacers but decided not to. No big deal, at least I had the option! I really liked the powder coat finish. It went well with the existing finish on the Bronco. Ford did not offer a hitch option when I ordered the vehicle. I’m thankful Curt had an off the shelf option available once we took delivery. The ordering, tracking and shipping/delivery process went off without any issues, always a good thing now days!
25
88
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Comparing Curt and Draw-Tite Hitch Receiver Locations for a Bike Rack on a 2024 Ford BroncoYes, the Draw-Tite Hitch # DT37GR has a longer receiver than the Curt Hitch # C76WR for your 2024 Ford Bronco. When we installed these on a 2022 Bronco we found the Curt hitch pin hole to sit 1" away from the vehicle frame while the Draw-Tite sat 7" away so you're gaining 6" of clearance with the longer receiver. If you don't already have a bike rack then I recommend checking out the RockyMounts BackStage Bike Rack # RKY10002 because it's a platform rack with a built-in swing-away arm...
view full answer...
- What All Is Needed to Install Curt Trailer Wiring on a 2024 Ford BroncoThe Curt Powered Tail Light Converter Kit # C59236 comes with everything needed to get it installed, but I do recommend picking up the Mounting Bracket # 18144 as well so you have a way to keep the 4-Way connector near your hitch receiver for easy access. If you're installing the Draw-Tite Hitch # DT37GR this bracket will connect to the extra tab that comes on the hitch, but if you're installing the Curt Hitch # C76WR you might need to secure the bracket to the rear fascia or tap it directly...
view full answer... - Recommended Hitch for a 2024 Ford Bronco For your 2024 Ford Bronco, I recommend the Curt Trailer Hitch item # C76WR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I really like this hitch because of its super easy installation method of bolting to your Bronco's bumper with four bolts. I have linked an installation video below to help you get this hitch set up. If you are planning...
view full answer... - Will The Curt Trailer Hitch Receiver # Y02483 Fit a 2024 Ford Bronco? Yes, the Curt Trailer Hitch Receiver # C76WR is confirmed to fit your 2024 Ford Bronco. If you plan on using this with hitch mounted accessories like a bike rack you will want to also use a Yakima BackSwing Swing Away Hitch Extender # Y02483. This will extend out the rack for clearance since you have the rear mounted spare tire. It also allows you to swing away your hitch mounted accessory to allow you to open the rear swing door on your Bronco.
view full answer... - Trailer Hitch Options for a 2022 Ford Bronco 2-DoorYes, both the Curt # C76WR and the Draw-Tite # DT37GR are compatible with your 2-Door 2022 Ford Bronco. I like the Draw-Tite hitch a little more just because it has a mounting bracket to easily connect the wiring. If you plan on using this hitch for towing then you'll also need the Wiring # TK99VR if you have LED lights or the Wiring # TK33VR if you don't have LED lights, as well as wiring bracket # 18144 (plus the No-Drill # 18140 if you use the Curt Hitch). To complete your towing setup...
view full answer... - Parts Needed To Install 7-Way and Tekonsha Trailer Brake Controller On a 2022 Ford BroncoI recommend using the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK55VR to install the Tekonsha Primus IQ Trailer Brake Controller # TK90160 and 7-way on your 2022 Ford Bronco. This Kit includes the Tekonsha Plug-In Wiring Adapter # 22292. The Hopkins Tail Light Converter Kit # HM48895 should not be used on your Bronco as this puts the power strain on the factory wiring and does not uses a powered converter like the Tekonsha above. Also the Pollak Black...
view full answer... - Parts Needed to Add 7-Way to 2023 Ford BroncoTo get your 2023 Ford Bronco set up with a 7-way, there's just a couple parts you will need. One of them is a 4-way, just keep in mind the right one for your Bronco will depend on if you have LED taillights or not: - WITH LED Taillights: T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C42WR OR - WITHOUT LED Taillights: T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C87BR - Universal Installation Kit for Trailer Brake Controller # ETBC7 You...
view full answer... - Does the Bumper on a 2024 Ford Bronco Outer Banks Need to be Removed to Install a Curt Trailer HitchHey Ed, it looks like you won't need to remove the bumper to install the Curt Trailer Hitch Receiver # C76WR on your 2024 Ford Bronco Outer Banks. This hitch is just going to bolt onto your Bronco's frame requiring no welding or trimming, and includes all the mounting hardware needed for install.
view full answer... - Trailer Hitch Confirmed to fit a 2022 Ford BroncoWe do have a trailer hitch confirmed to fit your 2022 Ford Bronco. - Curt Trailer Hitch Receiver # C76WR This hitch is made in the USA, has a bolt-on, no-drill installation and has a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you plan to do any towing, you can round out a tow package by adding the etrailer Ball Mount Kit # 989900 and the T-One Vehicle Wiring Harness # TK99VR if you...
view full answer... - Parts Needed To Add a Factory Style 4/7-Way Connector On a 2022 Ford Bronco With LED Tail LightsAs you already have the Curt Trailer Hitch Receiver # C76WR for your 2022 Ford Bronco Badlands you will only need the wiring. The Tekonsha OEM Replacement Vehicle Wiring Harness # TK55VR is compatible with your Bronco having LED taillights. This will include all the wiring for the trailer brake controller as we do not have a kit with all the wiring without the brake controller wiring. If you later need a Brake Controller # 90195 you will be able to add one at a later date. Rather than use...
view full answer... - Best Hitch for a Bike Rack on a 2024 Ford Bronco The best hitch for a bike rack on your 2024 Ford Bronco is the Draw-Tite item # DT37GR. This hitch has an extended 2" receiver that is designed specifically to clear the spare tire on your Bronco. It is a class III hitch that has a 675 lbs maximum tongue weight so you will have plenty of capacity for your bike rack. I have linked an installation video below to help you get this hitch set up.
view full answer... - Parts Needed to Tow a Trailer w/ Brakes w/ a 2023 Ford Bronco To install a 7-Way harness on your 2023 Ford Bronco you will need two separate wiring harnesses because they don't make just one harness that will add a 7-way. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C42WR for LED lights or item # C87BR. This custom-fit T-connector plugs into your Bronco's wiring harness, which is located behind the LED tail lights. This will provide you with a 4-flat connector. The second harness you will need is the Universal...
view full answer... - Extended Ball Mount for Clearing a Spare Tire Thanks for the picture! You won't need an extender plus that will cut your capacity. To clear your Bronco's spare tire you're going to want the Curt Ball Mount for 2" Hitches item # D-28. This extended ball mount has a 6" drop and is 14-1/4" long. It has plenty of capacity for your boat trailer. For a 2" hitch ball you will want the Curt item # A-90.
view full answer...
- 2-Bike Rack For 2022 Ford Bronco With Sasquatch Package 315/70-17 TiresThere is an option for a 2-bike rack for your 2022 Ford Bronco with the Sasquatch package that includes 315/70-17 tires, assuming you have the Curt Trailer Hitch Receiver # C76WR. The reason I say that is because when we installed this on a Bronco with standard tires 255/70-16 tires (which are 10" wide), it measured 12" from the center of the hitch pin hole to clear the spare. Your 315/70-17 tires are 12.4" wide, so we know with the # C76WR hitch you'll need a rack with just under 14-1/2"...
view full answer... - What Swinging Covered Locking Cargo Carrier do You Recommend for My 2021 Ford Bronco?I have a great option for you, and that is the Yakima EXO Swing Away # Y62VR. This has a built-in swing away feature, and the lid can be locked with the included key/lock setup. If you happen to need a hitch for your 2021 Ford Bronco, a great option is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C76WR. Not only does this hitch provide you with 350 pounds of maximum tongue weight and 3,500 pounds of gross towing weight capacity, it comes with a gloss outer coat over...
view full answer... - What is the Best Hitch for a Bike Rack on a 2024 Ford Bronco?The best hitch for a bike rack on your 2024 Ford Bronco is the Draw-Tite item # DT37GR. This hitch is custom fit and bolts to your Bronco's bumper with included hardware. The Draw-Tite item # DT37GR was specifically designed with a longer receiver to clear your spare tire. The hitch pin hole extends 7" past the outside edge of your Bronco's bumper. It extends 6" farther than the Curt item # C76WR you were looking at. This hitch also has the highest capacity available amongst Bronco hitches....
view full answer...
- Recommended Curt Trailer Hitch for a 2024 Ford Bronco Yes, for your 2024 Ford Bronco you can use the Curt Trailer Hitch Receiver # C76WR. This is a class III hitch that has a 3,500 lb weight capacity, a 350 lb tongue weight capacity, and is assembled in the USA.
view full answer... - What Hitch Extension Is Needed For Carrying E-Bikes Behind a 2023 Ford Bronco On 1Up Bike Carrier?Using a 18" Extension # e48YR is most likely going to extend the bike rack much further than what you are needing. If your 2023 Ford Bronco does not come with a receiver we do have the Draw-Tite # DT37GR which is specifically designed longer. This will place the hitch pin center hole 3-1/2" behind the rear bumper which better allows for hitch mounted accessories to clear the rear tire. A Curt Receiver # C76WR which is more like the factory option places the hitch pin hole 3" in on the rear...
view full answer... - Recommended Hitch for a 2023 Ford BroncoCongrats on your new purchase! To add a hitch to your 2023 Ford Bronco, I recommend the Draw-Tite item # DT37GR. This is a Class III hitch that is designed with an extended 2" receiver to clear the spare tire. I really like this hitch because of its ease of installation. It requires only four bolts ran into your Bronco's rear bumper to install. I have linked an installation video to show you how to get this hitch set up. If you are planning on towing you will also need a wiring harness...
view full answer... - Recommended Hitch for a 2022 Ford BroncoTo add a hitch to your 2022 Ford Bronco, I recommend the Curt Trailer Hitch item # C76WR. This hitch is custom fit and easily installs on your bumper with four included bolts. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I have linked an installation video below. If you are planning on towing you will also need a wiring harness item # C87BR for incandescent bulbs or item # C42WR for LED lights and a ball mount...
view full answer... - Best Hitch for Carrying a Bike Rack and Towing on a 2022 Ford BroncoThe best class III hitch for a bike rack that fits your 2022 Ford Bronco is going to be the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT37GR. This hitch is custom fit and bolts directly to your Bronco's bumper bar with included hardware. The reason this hitch is the best for carrying a bike rack is that it extends out far enough from beneath your Bronco to allow a bike rack to clear your spare tire. The center of the hitch pin hole for the Draw-Tite Max-Frame Trailer Hitch Receiver...
view full answer...
- Recommended Trailer Hitch for a 2024 Ford BroncoThe Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR is the same thing as the 76527 hitch you already have so If it didn't fit it's not going to work. Instead, I'd recommend going with the Curt Trailer Hitch Receiver # C76WR which we have listed as a fit for your 2024 Ford Bronco.
view full answer... - How to Install Curt Trailer Hitch on 2024 Ford BroncoIt honestly couldn't be any easier to install the Curt trailer hitch on your 2024 Ford Bronco, and I'll explain but first here is the correct part number for the hitch that fits: - Curt Trailer Hitch Receiver # C76WR Now, to install the # C76WR all you do is lift it up, insert the included bolts through the holes, and torque them. That's literally all there is to it. I have added a cut out below of the instructions showing the complete install so you can see how simple it is. If you...
view full answer...
- Will Curt Trailer Hitch Receiver Fit 2023 Ford Big Bend BroncoYes, the Curt Trailer Hitch Receiver # C76WR fits all models of the 2023 Ford Bronco. That includes your Big Bend trim. It has a simple bolt-on installation and comes with a limited lifetime warranty. If you plan on towing, you will also need wiring and a ball mount. If you have LED taillights you need the # C42WR and for incandescent you need # C87BR. For a ball mount, check out the Curt Towing starter kit # C45534. This comes with a 2" ball, hitch pin, hitch receiver lock, hitch cover,...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Lindsey S
Installed by:
Jeff D
Video by:
Joshua S
Video Edited:
Chris R
Updated by:
Wilson B
Test Fit:
Ryan G
Test Fit:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rik
10/15/2022
Fit and finish is still intact and the passivated zinc fasteners are holding up...no complaints whatsoever! I do believe other companies have come up with similar solutions, and similar products can be found that are less expensive...but some of them require removal of the rear bumper this product does not.