Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Recommended Brake Controller And Wiring For 2000 Ford F-150
  You will have the port under the dash to plug in the adapter for a brake controller on your 2000 Ford F-150. I recommend the Tekonsha Primus, part # TK90160. This controller features a digital readout that will alert you to any problem with the braking system rather than a single LED that changes colors. The plug-in adapter for the Primus you need is part # 3035-P. One end simply plugs into the back of the controller and the other end plugs into the port located under the dash. I have...
  view full answer...
• What Makes the etrailer Trailer Hitch Different Than Other Hitches for a 2003 Ford F-150
  The etrailer Trailer Hitch Receiver # e92KR differs from the other fits for your 2003 Ford F-150 in that it has a matte black finish. This not only looks more rugged but is more durable than the classic glossy black finish we see with the other hitches. I really like this finish and recommend it as often as I can. If you don't already have trailer wiring on your truck then I recommend the Curt T-Connector # C55344 if you have a Flareside or SuperCrew or the T-Connector # C56031 if you...
  view full answer...
• Where is the Draw-Tite Hitch for a 2007 Ford F-150 Made
  The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75506 which is a fit for a 2007 Ford F-150 is made in Mexico. If you are looking for a USA option, the Curt Trailer Hitch Receiver part # C13360 is the way to go. If you need a trailer connector to go along with the trailer hitch, the Curt T-Connector Vehicle Wiring Harness part # C56031 is plug-n-play.
  view full answer...
• Recommended Trailer Hitch Receiver for 2005 Ford F-150
  The Draw-Tite Max-Frame Trailer Hitch Receiver # 75156 is an easy bolt on hitch option confirmed to fit your 2005 Ford F-150. The installation requires no drilling and will take someone with basic mechanical ability about 30-40 minutes to install. If you will be adding trailer wiring, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56031 will connect to the factory wiring harness ports. You can then use the mounting bracket # 18144 along with # 18136. If...
  view full answer...
• Hitch and 7-Way/Brake Controller for 1997 Ford F-150 without Tow Package
  The Micro Minni Winnebago travel trailers typically weigh between 3,000 and 3,700 lbs so for a hitch for your 1997 Ford F-150 a Class III model like the Draw Tite part # 41920 would be a really great option with more than enough capacity. To add a 7-way you would need to start with a 4-way like the part # C56031 which is a confirmed fit and the easiest install. Then to convert this to a 7-way and wire in a brake controller like our very reliable and well-performing Brake EVN # TK63VR...
  view full answer...
• Trailer Wiring Harness and Brake Controller For 2002 Ford F150
  If your truck already has a 4 pin trailer connector, you'll just need a # 37185 adapter, a brake controller like the Tekonsha # TK90160 Primus you'd looked at and the # 3035-P wiring harness. If you don't already have the 4 pin connector, you'd also need a # C56031 harness to tap into the taillight harness in addition to the brake controller and brake controller harness mentioned above. I'll link you to a help article that runs through the installation procedure for you step by step.
  view full answer...
• Will Trailer Wiring Harness 20028 Fit a 1998 Ford F-150 without Factory Trailer Connector
  To solve the problem of the dirty connections you can clean them, then use dielectric grease at the connections, # 11755, and then seal everything up using liquid electrical tape, # SWC50122. Another option is to replace the 4-Way you are using with either # C56031 for a non-stepside bed or # C55344 for a stepside bed. These connectors actually plug in line with the tail light wiring so you will not have to use quick splice connectors.
  view full answer...
• Is the Hopkins Plug in Harness # HM40145 Compatible with a 1999 Ford F-150 4x4?
  If you have a factory 4-flat connection on your 1999 Ford F-150 4x4 then the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM40145 will be a confirmed fit. This custom-fit T-connector plugs into your Ford F-150 wiring harness, which is located behind the rear bumper, near the driver's-side frame rail. If you do not have the factory 4-way flat, then you will want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56031....
  view full answer...
• Trailer Wiring Harness for a 2007 Ford F-150
  It sounds like that 2-pin connector you found might be related to power lights or a brake light in/on a camper shell. If it is not that then I am not sure what it would be for but I can tell you that it will not be for trailer wiring. To add a 4-Way on your 2007 Ford F-150 you can use # C56031. I have included a link to a video review of this harness for you.
  view full answer...
• Recommended Towing Package For A 2004 Ford F-150 Heritage Series
  When it comes to installing a towing package on your 2004 Ford F-150 Heritage Series there is a few things you will need. First the trailer hitch. If you have a standard bed model Ford or the step side model Ford The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # 75740 is confirmed for your vehicle. This trailer hitch has an easy, bolt-on installation with no welding required. It has a black powder coat finish that covers an e-coat base for superior rust...
  view full answer...
• Recommendations For Adding A Brake Controller To A 2007 Ford F-150
  Getting a brake controller installed on your 2007 Ford F-150 will require a few things. First will be a 4 Flat like the Curt # C56031, if you do not already have one. This will supply the power to the taillights, but you will also need the Universal Installation Kit for Trailer Brake Controller # ETBC7 for the rest of the needed power and functions. This will piggyback off the 4 Flat and includes the 7 Way, all the needed wiring, circuit breakers, and brackets needed to add a brake controller. There...
  view full answer...
• 7-Way Recommendation for 2006 Ford F-150 without Factory 7-Way
  If your 2006 Ford F-150 has a round plug behind the bumper you would want the part # 74682 for a replacement 4-way and 7-way that would plug right in and be functional. Otherwise you would need the # C56031 for a 4-way and then a # 37185 to convert it to a 7-way.
  view full answer...
• Recommended Brake Controller And Trailer Wiring For 2000 Ford F-150
  There is a brake controller port under your dash near the diagnostic port. I recommend the P3 Brake Controller # 90195. this is one of our most popular brake controllers because it is easy to install and operate. The plug-in adapter for this brake controller is part # 3035-P. If you have a factory 7-way trailer connector at the rear of your truck, no other wiring is needed other than the brake controller and the plug-in adapter. If your truck is not a Flareside and you do not have a...
  view full answer...
• Installing 7-Way Trailer Wiring Connector to 2005 Ford F-150 Super Crew
  The Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector # 118247 may be a fit for your 2005 Ford F-150 as sometimes the wiring changed part way through the model year change. That harness is a fit for 2004 models and retains the 4-way flat already present. It sounds like you don't have the 4-way and most likely have a connection like the one pictured for 2005 models. In this case you won't have a direct option to add a 7-way but one can still be installed with a couple...
  view full answer...
  
• Trailer Wiring Recommendation for 2002 Ford F-150 That Does Not have Trailer Wiring
  You will need to start with a 4-way (if you do not have one). For that you would want the # C56031 if you only need a 4-way. Now if your trailer does not have brakes but you do need a 7-way instead all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake...
  view full answer...
• Using the Curt Venturer Brake Controller with a 2001 Ford F-150
  To use the Curt Venturer Brake Controller, part # C74VV, with your 2001 Ford F-150, you will need the Custom Wiring Adapter for you vehicle, which is part # C51322. I've linked to a video installation of these two for you to reference. Keep in mind that in order to use a brake controller, you need a 7-way on your vehicle. If you don't have one, then use the etrailer Universal Installation Kit, part # ETBC7. This will hook up to your factory 4-way. I've linked to a video installation of...
  view full answer...
• Parts Needed to Install a 7-Way on a 2005 Ford F-150
  You would first need to start with a 4-way on your 2005 Ford F-150. For that you would want the part # C56031 which is a confirmed fit. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # 3035-P, the # 37185, and a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller...
  view full answer...
• Troubleshooting Trailer Wiring on 2005 Ford F-50 Not Functioning
  Typically when trailer lights are acting up the problem is actually the grounds of the light assemblies or the ground of the main trailer connector. If you can ensure the grounds are making a solid connection and verify that there is no corrosion in the connectors that will most likely take care of the problem. If there is corrosion clean it out with a wire brush or sand paper. You also can use a circuit tester like part # PTW2993 to test the pins of your current 4-way to see if the connector...
  view full answer...
• 2001 Ford F-150 Trailer Hitch Needed with a 700 lbs Tongue Weight and Fits with Spare Tire
  The Draw-Tite Trailer Hitch Receiver # 37130 is a Class IV trailer hitch with a 2" receiver opening that is confirmed to fit your 2001 Ford F-150 and will allow you to keep your full spare in it's current location. This has a 7,000 lbs Gross Towing Weight (GTW) rating and a 700 lbs Tongue Weight (TW) rating. When used in conjunction with a Weight Distribution (WD) system those ratings are bumped up to 12,000 lbs GTW and 1,200 lbs TW. I have attached the installation details for you to...
  view full answer...
• Brake Controller For 1998 Ford F-150
  The best and most popular brake controller we offer is the Tekonsha Prodigy P2 Trailer Brake Controller, part # 90885. This is a proportional controller and will activate your trailer brakes in proportion to your 1998 Ford F-150 truck's braking action. This system is easy to install and to use. The other items you need for installation depend on the type of wiring you have on your truck. If you have the factory 7-way connector on the rear of your truck then I recommend the Tekonsha Plug-In...
  view full answer...
• Recommended Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2000 Ford F-150
  I've linked all of the available trailer hitch receivers that fit your 2000 Ford F-150. Of the selection I recommend the Curt # 13359. It's a complete bolt-on installation and fits both the standard and stepside trucks. It also allows the full-size 20 inch spare tire to remain in place. I've linked the install details for you. If you also need trailer wiring you can add a 4-way using # C56031 if you have a standard bed or # C55344 for a Flareside. These both plug in behind the tail...
  view full answer...
• Can Curt Trailer Hitch 13365 for a 2007 Ford F-150 Handle 4,000 Pounds of Trailer and Horses
  Curt trailer hitch # C13365 is rated for 6,000 pounds gross trailer weight (10,000 pounds when using weight distribution) so it can handle a gross trailer weight of 4,000 pounds easily. If you plan on doing some towing you might be interested in etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer...
  view full answer...
• Parts Needed to Install 7-Way on 2003 Ford F-150 without Trailer Wiring
  You will need to start with a 4-way (if you do not have one). For that you would want the # C56031. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake...
  view full answer...
• Hopkins Smart Hitch Backup Camera Compatibility with 7-Way Trailer Connector Without Tow Package
  The Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002 will not plug into the Hopkins Endurance 7-Way Trailer Connector Socket # HM48480 but it will plug into the Endurance Quick-Install 7-Way Trailer Connector with Universal Pigtail Harness # HM47210 or the Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter w/ 4-Way Vehicle End Plug # HM47180. If you don't have any wiring yet, my recommendation is to use the Curt T-Connector Vehicle Wiring Harness with 4-Pole...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?