Recommended Brake Controller And Wiring For 2000 Ford F-150
Question:
I am interested in a trailer brake controller. How can I tell if my 2000 Ford F150 is prewired under the dash? I purchased it used with no manuals. I would like to install a Tekonsha Voyager. Thanks,
asked by: Pat K
Expert Reply:
You will have the port under the dash to plug in the adapter for a brake controller on your 2000 Ford F-150.
I recommend the Tekonsha Primus, part # TK90160. This controller features a digital readout that will alert you to any problem with the braking system rather than a single LED that changes colors. The plug-in adapter for the Primus you need is part # 3035-P. One end simply plugs into the back of the controller and the other end plugs into the port located under the dash. I have attached a link to an installation video for a brake controller on a 2000 F-150 you can check out.
If you have a 4-way connector at the back of your F-150 but no 7-way, you will need part # ETBC7. This will connect to your 4-way connector and gives you a 7-way and 4-way connector for your trailer.
If you have no 4-way connector at the back of your F-150, you will need part # C56031. This is an easy installation and does not require cutting or splicing into the existing wiring. The location points are located behind the rear bumper.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
I have attached links to some helpful articles that you can take a look at.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: How do I Tell if the Brake Controller is Bad
- Q&A: How Is Spring Bar Tension Set Up with Trailer Weight Distribution System
- Q&A: Lift Kit Options For A 2015 Winnebago Micro Minnie 1706FB