Replacement Charger for Curt Soft Trac I and II Trailer Breakaway Kits
(7 reviews)
Price: $7.12
In Stock
Replacement Charger for Curt Soft Trac I and II Trailer Breakaway Kits
Item # C52025
Retail:$13.73
Our Price: $7.12
You Save: 48%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (7)
- Q & A (0)
- Videos (2)
- Photos
CURT Accessories and Parts - C52025
- Trailer Breakaway Kit
- Battery Charger
- CURT
Replaces the 12-volt battery charger that came with your Curt Soft Trac breakaway kit. This charger wires to your tow vehicle's power source and to the battery in your breakaway kit.
Features:
- Replaces the charger that came with your trailer breakway kit
- Works with Curt Soft Trac I (C52040) and Soft Trac II (C52028) breakaway kits
- Can be added to trailer breakaway kits that did not originally come with a battery charger
- Hardwires to your vehicle's power source and to the battery in your breakaway kit
- Wire functions:
- Red: breakaway battery
- Blue: breakaway switch
- Black: 12-volt power
52025 Curt Replacement 12V Battery Charger for Soft Track 1 and 2 Break Away Systems
California residents: click here
Video of Replacement Charger for Curt Soft Trac I and II Trailer Breakaway Kits
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Curt Trailer Breakaway Kit C52025 Review
Speaker 1: Today we're taking a look at a replacement charger for the Curt Soft-Trac one and two trailer breakaway kits. This replaces the charger that came with your trailer breakaway kit. It works with the Curt Soft-Trac and Soft-Trac two breakaway kits, part number C52040 and C52028. This can be added to a trailer breakaway kit that did not originally come with a battery charger, and it hard wires to your vehicle's power source into the battery in your breakaway kit. It's a really nice design. It has a couple little mounting tabs right here so it can be mounted permanently for a more secure mount.
It's a three-wire design, so the red wire is for the breakaway battery. The blue wire is for the breakaway switch, and then the black wire is for 12-volt power. That's going to do it for today's look at the replacement charger for Curt Soft-Trac one and two trailer breakaway kits.
Customer Reviews
Replacement Charger for Curt Soft Trac I and II Trailer Breakaway Kits - C52025
Average Customer Rating: 4.3 out of 5 stars (7 Customer Reviews)
Replaces the 12-volt battery charger that came with your Curt Soft Trac breakaway kit. This charger wires to your tow vehicle's power source and to the battery in your breakaway kit.by: Michael 09/21/2022
Very Prompt, let customer know of order status. Pleasure working with your team.
by: Adam08/14/2023
by: Michael 10/26/2020
No complaints currently
by: Kendall 10/02/2019
Fast service, product as described.. Thank You
by: John04/03/2019
quick delivery and good price
by: Ed04/09/2023
by: Adam 03/17/2021
7
7
See what our Experts say about this CURT Accessories and Parts
- Recommended Battery Charger For Trailer Breakaway BatteryYou do need to keep the breakaway switch battery on your trailer tongue charged, but you will not want to charge it with your Progressive Dynamics charger. Instead you will want to use the Replacement Charger for Curt Soft Trac I and II Trailer Breakaway Kits # C52025 which will get wired into your 7-way connector and charge your breakaway battery when the trailer is connected to your tow vehicle. You will wire the red wire to your breakaway battery, the black wire to the 12v power wire...
view full answer... - How Does the Curt Breakaway Battery Charger C52025 WorkThe Curt Breakaway Battery Charger part # C52025 only charges the breakaway battery while the trailer is plugged into the vehicle and the vehicle's battery charge line circuit is active (it could be constant on or keyed with the ignition). Once the trailer is connected and the circuit is active, the charger will provide a trickle charge to the breakaway battery. There is a shutoff feature built-in to prevent overcharging. The breakaway battery should not have to be hooked up for the charger...
view full answer... - Where Does the Red Wire Attach When Installing Curt Replacement Charger for Trailer Breakaway KitsWhen installing the Replacement Charger for Curt Soft Trac I and II Trailer Breakaway Kits # C52025 the red wire that has the spade terminal pre-crimped on it will be the only thing on the battery positive post. If you have an old wire on there you can remove it. I have attached an installation and review video for your reference which shows all of the steps and where each wire goes.
view full answer... - My Breakaway Switch Reads 7.6V Does That Mean It Is Defective?Yes, you should be receiving 12v with your Replacement Charger for Curt Soft Trac I and II Trailer Breakaway Kits # C52025 installed. A voltage reading of 7.6V is a definite indicator that there is something causing a power drop somewhere in your wiring. The usual culprit is a corroded or broken wire somewhere along your wiring. I recommend tracing the blue wire and inspect it for any breaks, frays, or pinches. Additionally, there may also be a possibility that the circuit board part...
view full answer... - Can Replacement Charger for Curt Soft Trac # C52025 Work without Blue Wire ConnectedYes, the Replacement Charger for Curt Soft Trac # C52025 that you referenced will still charge without the blue wire connected to anything.
view full answer... - Wiring Instructions for the Curt Soft Trac ChargerYou are correct that the Red wire from the Charger for Curt Soft Trac I and II Trailer Breakaway Kits # C52025 is connected to the Battery, the White is connected to Ground, the Blue is connected to the Breakaway Switch. The Black wire that you are asking about will be spliced into the 12V Power wire on your trailer. This should be the wire connected to the pin in the 11 O'clock position on your trailer's 7-Way connector (see attached picture). You can test this out by connecting your trailer...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
David F
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/16/2023
It is very quiet in this review. If you have any questions or concerns please contact me.