Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
(140 reviews)
Price: $178.93
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # C12107
Retail:$306.95
Our Price: $178.93
You Save: $128.02
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (140)
- Q & A (0)
- Photos
CURT Trailer Hitch - C12107
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
12107 Curt Class 2 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2018 Toyota Avalon
- 2012 - 2017 Toyota Camry
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12107
Average Customer Rating: 4.7 out of 5 stars (140 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Joe 01/11/2024
I have bought several receiver hitches from etrailer and they were top quality hitches. Etrailer hitches are priced below the standard market prices for comparable hitches. I did have a problem installing the hitch in that the slots in the hitch were almost too short to get the bolts started. I do not know if it was the fault of the hitch or the car. It did install and looks nice on my car. I would and will buy from them again. Joe
by: John 10/18/2022
It is a near perfect fit. Bolts up and lines up as described and is very secure. Removing, cutting and reinstalling the plastic cover to get to the frame was a bit of a surprise and challenge. As was dropping the exhaust, but it all worked out. We use it for hauling bikes and it works great.
by: Jim11/18/2017
2017 Toyota Camry
I invested four hours total putting the hitch on the car. One hour was prep and cleanup. Could do another in less than two hours easy. I decided to ramp up the rear of the car with boards rather than jack and jack stands since they are always in the way when you're working underneath. (See pic.) I had the wife help me twice when putting the hitch on, the rest was just me. With the right tools near anyone can do it. (I'm 74). Your video and instructions are excellent and so is your product.
Have to mention something that will put a smile on your face. The first thing to be done was to remove the two brackets on either side of the car. They are held in place with two 14mm bolts on either side but they are kind of tough to get at so I decided to remove the 17mm nuts instead since they were easier to get at. A 17mm wrench with a mallet wasn't enough to get the nuts off so I got a 1/2" breaker bar and with all the strength I could muster I finally got those stubborn SOB's to break loose. Only then did I think to take a closer look and sure enough they were welded on (as per your instructions). Luckily they were meant to stay off.
Jim D.
by: Phillip12/08/2020
2012 Toyota Camry
I didn't cut off any underbody panel pieces. I just made a slit for the hitch to slide through. Also didn't cut off any heat shield. I drilled a hole for the 1/2" screw and torqued it to xx ftlb as instructed. Every thing worked fine. Hard to believe the video instructed to cut off that much. A bit crazy IMO. Also.. super snug fit. So snug I had trouble getting the M12 bolts to line up with the thread in the subframe. Pain the ass, but eventually got it in.
by: Dawn 06/13/2023
Ordering from etrailer is so easy and the prices are competitive. I have made at least 3 hitch & accessory purchases and I've never had the first problem. Some companies ask many irrelevant questions which makes selecting the proper hitch harder than it needs to be.
by: Andy05/17/2022
2014 Toyota Camry
The build quality is excellent and well built. The tolerances are very tight, I had to wallow out one of the mounting holes slightly. It fits a 2014 Hybrid nicely. The hardest part was dealing with the muffler being in the way. I am glad I had a single exhaust design. Also, my vehicle did not have access to the frame to feed the bolt though. I had to use a dremel to open a larger area for the rear mounts. Took a couple hours and had a helper hold the muffler aside while trying to drill required holes. It wasn't the easiest to install so I only gave 4 stars. But the product itself is well made and I feel it will work well.
by: Sally 09/01/2023
The customer service is excellent and my trailer hitch came in two days.
by: James p10/13/2018
2012 Toyota Camry
Fast delivery and everything fit perfect. Easy installation after watching etrailers videos. Lowest price I found on the internet for this hitch. Thanks for the great service.
by: Vin09/26/2020
2016 Toyota Camry
Fairly easy to install. Took 1hr and 45 minutes to install. Don't need the instructions just watch the video provided by etrailer. It easier to use a 1 and 1/8 hole saw then the step bit.
by: Canh07/21/2023
Excellent support on selection of proper parts and delivery tracking.
by: Shereen05/22/2023
2014 Toyota Avalon
The trailer store was unable to get this for us so I ordered directly. Got it in reasonable time and it was easy for my husband to install. We are up and going!! Thanks
by: Tim09/03/2019
2017 Toyota Camry
All equipment was delivered on time. Hitch, wiring harness, receiver and ball. Watched video's on installation of harness and hitch. Went down to my garage and installed both with the help of my girlfriend. Very satisfied with the products and the installation. etrailer supplied the goods and the knowledge. I am very happy that I went this route.
by: John 10/27/2022
Toyota Avalon
Good selection and good value on a trailer hitch for my Avalon from etrailer. Great to have for small boat trailers, lawn mower trailers, bike racks and small platforms for hauling coolers etc. Makes the car more versatile.
by: Jim DS05/26/2014
2013 Toyota Camry
The hitch was of industrial strength sadly unlike the enclosed instructions, which were weak at best. I have installed similar hitches on similar cars and getting this on a 2013 Camry V6 took 5 hours. Others have been a maximum of 2 hours. This includes the trip to Home Depot to get THE tool that you need that is not specified - a one inch metal hole saw that you WILL need in order to install this hitch. In summary, looks good, solid, needs better instructions. Do your own due diligence before you start on this and do NOT rely on the included instructions.
I should also mention that the plastic cover that the instructions say "give back to the customer" I did manage to get back on to the underside of the car with a bit of brute force and a couple fewer of the self tapping screws (bolts?) yet still is secure on the car after installation.
Jim D.
5/28/2015
The product works fine. The only issue is that the cut back exhaust heat shield rattles occasionally.
by: James04/12/2018
2017 Toyota Camry
Prompt delivery from etrailer. Quality well built trailer hitch. Provided instructions were pretty inadequate but watching the installation video on the website a couple times was all I needed to install this item. For my Camry it did involve some drilling as the video showed but was nothing super complicated. I am pretty mechanically inclined, and doing this installation all by myself took approx 4 or 4.5 hours from open box to cleanup. Very satisfied with this hitch and etrailer!
James
4/12/2019
Works fine, no problems with anything. Tucks up nice under the bumper so its not sticking out. No problems with it scraping the ground as others have said. Solid and built well. Thanks etrailer!!!
by: Father Paul07/04/2020
Good except that it was difficult to tell if the pin had to go further into the hitch for safety. Also it was very difficult to remove the bike rack from the hitch. I was told by Yakima Support that I should have put silicone spray inside the hitch before putting the bike rack in. God bless you!
Father Paul
7/5/2021
Good, but it is difficult to pull the hitch out, when removing it from my car. I have to use silicone spray to remove the hitch.
by: Neil S.12/27/2016
2013 Toyota Camry
Although the product it self is pretty well made, i am slightly disappointed in over all fitment of the trailer hitch. i am sure engineers have their reasons for the hitch hanging so low from the bumper.
install is fairly straight forward other then the need to widen the holes a little bit.
over its a good hitch i knew what i was buying i knew it would hang low.
good product nevertheless.
etrailer always makes it easy to buy.
Neil S.
12/27/2017
After a full year of ownership I am still happy with my hitch although it is starting to chip and rust is coming through around the receiver hole.still cant get used to seeing how low it hangs and have scraped it a couple of times coming out of driveways.other then that its a great addition to a car, converts a camry into a pickup truck with a little 4x6 trailer.
by: Nelson 03/14/2023
Easy installation due to exact model as in video
by: Robert 06/20/2020
2013 Toyota Camry
I installed this on a 2013 Camry SE. It fit perfectly and it went on exactly like the instructions said. I'm above average when it comes to handyness and it took me an hour including clean up. I did it in my garage with the car up on jack stands. If you are looking for a hitch is recommended this one.
Robert
6/22/2021
Its been a year since Ive installed this hitch. It still looks like new. I live in Wisconsin so its exposed to a lot of road salt in the winters and there is no rust.
by: Don10/29/2016
2015 Toyota Camry
I haven't even opened the box - this review is based solely on my past experience with the etrailer. Take it or leave it.
The review: I have never had the wrong parts shipped or the slightest problem with the etrailer on all my past orders. This is a Christmas present for someone else and I'm sure it will be perfect. Even if this wasn't "perfect," I have absolutely no doubt they (etrailer) would fix whatever might come up
Don
10/29/2017
Daughter-in-law has it installed on her Toyota and is working fine I’ve subsequently ordered a couple of more. The latest was on our 2016 Lexus RX 350 and it too “fit like a proverbial glove”-trailer light interface wiring also snapped in with no issues
by: Kevin05/27/2021
Ordered this so my Camry could tow my 2 stand up jet skies. Works great. Definitly more tricky to install than the one I did on my Honda Accord. However very much worth it.
Kevin
8/14/2022
Still working great in my Camry. I use it to tow the jet skies and it’s never had an issue.
by: Erick04/18/2016
2012 Toyota Camry
We purchased this hitch for our 2012 Toyota Camry LE. Toyota does not recommend towing with this vehicle, nor sell a Toyota hitch for this car. I don't know why, the Europeans will tow a huge camper behind any 4 cylinder gas miser. However we use the hitch to mount our bicycle rack, and it has worked out great for this purpose. We had it professionally installed by our auto-body mechanic, because frankly I'm at the stage of life where I can afford to pay someone who has a lift, instead of me contorting my body like a pretzel to climb under there and proceed to scrape my knuckles, lay down tools out of reach and otherwise frustrate myself into yelling profanity within earshot of the neighbors little kids. However feedback from the mechanic states that in went in like apiece of cake except that he had to cut a bit of the heat shield to make it fit. So if you are coming back from a trip to the moon, remember, you have a little less heat shield for re-entry.
by: Mike V04/20/2015
2012 Toyota Camry
This is the third hitch I have purchased from e trailer and as always it is an excellent fit and hitch. The hitch is on a Camry and looks and works great. Mike
Mike V.
4/21/2016
It is a great product. It is the second one I have purchased and it was as easy to install as the first one. If I change cars again I will buy from e-trailer.
by: Cl Morgan01/24/2020
The trailer hitch works perfectly. I use it weekly to haul debris and bring construction materials back to my project houses. The paint shows no signs of failure, even with the salt that’s used on our roads. Likewise the steel shoes no sign of age by way of rust.
This is the second Curt trailer I’ve used on my cars and they have both performed without flaw.
One caveat, I have to be careful on steep driveways entrances and street crossings because the trailer can scrape on the pavement. This is not a design failure, the hitch simply lowers the vehicle clearance by a couple inches. Still, I’d rather get the mileage of a car for 90% of the time I use it and use a trailer for the heavy lifting.
25
140
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- How Far Apart Should the Bolt Holes to Mount a Hitch on a 2013 Toyota Camry BeYour best bet is going to be to confirm the part number on the spec sticker of the hitch; the Draw-Tite # 36540 and Curt # C12107 are the confirmed hitches we offer for your 2013 Toyota Camry. The distance between the bolt holes on these hitches are all different depending on their positions but they are: 38" apart center on center for holes closest to engine 38-1/4" apart center on center for holes closest to bumper 37-1/4" apart center on center for the middle holes I've also linked...
view full answer...
- Trailer Hitch Receiver Installation On 2017 Toyota AvalonThe Curt Trailer Hitch Receiver Class II - 1-1/4" # C12107 or the Draw-Tite # 36540 will fit the same way on your 2017 Toyota Avalon. You can either cut a hole for the hitch in the underbody panel or you can leave it off, but there isn't a trailer hitch receiver option that will allow you to leave the underbody panel on without trimming.
view full answer... - Trailer Hitch Recommendation for 2017 Toyota CamryFor a 2017 Toyota Camry I would recommend the Curt hitch part # C12107 as it has the highest towing capacities and we have found to fit the best.
view full answer... - Recommended Trailer Hitch For A 2012 Toyota Camry For Holding A Cargo CarrierThough I am not familiar with the ECOTRIC brand as it is not one that we carry, it does look to need a hitch to be able to install on your 2012 Toyota Camry. With that said, we do have a few hitch options available for your car and the Curt # C12107 is a good one. This is American made and I included an install video for you to check out. However, this, as well as the Draw-Tite # 36540, are Class II hitches which means they have a 1-1/4" receiver. This is due to your 2012 Camry having...
view full answer... - Trailer Hitch for Carrying Bikes on 2016 Toyota CamryThe Curt # C12107 Class II hitch would be absolutely perfect for carrying a bike rack with your 2016 Toyota Camry. The hitch includes all the necessary hardware to successfully complete the installation. If you click the provided link, you can see a video of the hitch being installed on a 2016 Toyota Camry like yours. The Thule # TH9058 Camber would be an excellent choice for a bike rack. The no-frills rack is very rugged, is of high quality and is highly regarded by our customers. I've...
view full answer... - Does Curt Hitch C12107 for 2016 Toyota Camry Come with Hitch Install HardwareThe Curt hitch part # C12107 that you referenced is a confirmed fit for your 2016 Toyota Camry and comes with all needed hardware, but if you were in need of replacement hardware you would need the part # RHK. On the product page you would enter the part number for the hitch and then select the brand of the hitch and we would ship you out the correct hardware.
view full answer... - Recommended Bike Rack for the Curt Class II Trailer Hitch on a 2015 Toyota AvalonThe bike rack that I recommend using with the Curt Trailer Hitch # C12107 and Stabilizer Strap # 18050 on your 2015 Toyota Avalon is the Thule Camber # TH9058 for a few key reasons. The first reason is that hanging racks are lighter than platform racks (this one only weighs about 28 lbs) so moving it around and installing/removing it from your trailer hitch will be easier than some of the heavier bike racks. The second reason is that the cradles are set in place on the arms and are spaced...
view full answer... - Trailer Hitch Installation on 2013 Toyota Camry XLE V6Hitches for your 2013 Toyota Camry XLE V6 can be seen on the link provided. The particular one you referenced, Curt hitch # C12107 is a fit for both the hybrid and non-hybrid versions. All available hitches are a 1-1/4-inch Class II type. All will require some drilling and temporary lowering of the exhaust (by removing it from its rubber hanger); some will require trimming of the heat shield and may also require trimming or removal of the underbody panel. If you refer to the linked install...
view full answer... - Trailer Hitch and Ball Mount Fit for 2015 Toyota Camry XSEThe Curt Trailer Hitch Receiver w/ Euro Drawbar # C114122 is not a fit for your 2015 Toyota Camry XSE. Instead you will want the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12107 which does come with the hardware. If you want the Euro Style ball mount # C45572 is the correct fit. Finally you will need a pin and clip # F-4 or a locking pin like # e98880. For your trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118405...
view full answer... - Hitch Recommendation for a 2012 Toyota Camry HybridThe Curt Hitch # C12107 that you referenced will fit the 2012 Toyota Camry Hybrid models. You will need to remove the underbody panel and trim the heat shield to install this hitch. The lack of the under body panel will not significantly protect the undercarriage of your vehicle from winter road conditions as that panel does not seal the undercarriage so salt and road grime would still find its way in there. As for finding a shop to install the hitch, pretty much any qualified mechanic...
view full answer... - Best Way to Carry 50 lb E-Bike with a 2016 Toyota AvalonThe Thule Gateway 2-Bike Rack # TH88VR has cradles that can only accommodate up to 35 lb bikes, which is standard for a trunk mount rack so we need to get a hitch installed on your 2016 Toyota Avalon so you can use a hitch mount platform rack that can handle more weight. I recommend installing the Curt Class II Trailer Hitch # C12107 on your Avalon and then pairing this with the Saris SuperClamp EX Bike Rack for 2 Bikes # SA4025F. I really like the HighNoon FC because it can handle up...
view full answer... - Trailer Hitch and Wiring for a 2012 Toyota Camry to Move a 370 Pound ScooterI do have a solution for you but using just a hitch-mounted carrier will not work. In order to carry a scooter on a trailer hitch mounted carrier both the trailer hitch and the vehicle would have to have a tongue weight capacity greater than the combined weight of the scooter and the carrier. The trailer hitch with the highest tongue weight capacity that fits your 2012 Toyota Camry is # C12107. This hitch tops out at 350 pounds tongue weight so you would have to carry the scooter another...
view full answer... - Trailer Hitch and Wiring Recommendation for 2016 Toyota Camry HybridFor your 2016 Toyota Camry the Curt hitch part # C12107 is a confirmed fit since it also fits the hybrid models. For trailer wiring then the Curt kit part # C55567 would work great and is easy to install. The ball mount you'd need is the part # C45017 and then for a ball # 19256 would be correct for a 1-7/8 inch size.
view full answer... - 2014 Camry XLE Hybrid Towing CapacityI looked up the towing capacity of your 2014 Camry XLE Hybrid online and found it to be 1,115 lbs which would be enough for a small rental trailer. We have just what you'd need to tow a small trailer too. First you need a hitch which for that we have the Curt part # C12107 as a fit that would have plenty of capacity. For trailer wiring you'd then want the part # 118405 which has the most reliable converter box available and is easy to install. Then for a ball mount you'd want the Curt...
view full answer... - Is there Body Panel Modifications Needed to Install a Curt Hitch on a 2012 Toyota CamryBasically for all of the hitches available for the 2012 Toyota Camry you will have to do the same modifications. You will need to temporarily lower the exhaust, modify the heat shield possibly and trim or remove the underbody panel. I attached installation instructions for the Curt Trailer Hitch # C12107 for you to check out to give you an idea what the install will be like. If all of the modification is not something you are interested in doing you could also just get a trunk mounted...
view full answer... - Trailer Hitch and Wiring Harness for a 2012 Toyota Camry HybridFor a 2012 Toyota Camry Hybrid you can use Curt trailer hitch # C12107. I have included a link to the instructions for you. This hitch comes with the proper ball mount, pin and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # C55567 that you have referenced. I have linked instructions for it as well.
view full answer... - Hitch Receiver and Hitch Bike Carrier Recommendations for 2013 Toyota Camry LEConsumers are protected by a Federal law called the Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. A trailer hitch is a very common addition to many vehicles and dealerships often have their own OEM models available to sell you. These typically cost more than the aftermarket...
view full answer... - Recommended Hitch for a Bike Rack on a 2016 Toyota Camry The best hitch to use a bike rack on your 2016 Toyota Camry is the Curt Trailer Hitch item # C12107. This hitch is custom fit and bolts to your Camry with included hardware. This is a class II hitch with a 1-1/4" receiver. It has a 3,500 lbs towning capacity and a 350 lbs tongue weight. This hitch will be perfect for using the Thule EasyFold XT Bike Rack item # TH903202. If you go down the left side of our product pages below the pictures you will see a blue link that says, Locate installers...
view full answer... - Stabilizer Strap and Ground Clearance for a 2012 Toyota CamryCurt hitches like the Class II designed for the Toyota Camry, part # C12107 require the stability strap, part # 18050 as part of the warranty. Beyond that, the stability strap is one of the easiest ways to improve the performance of any non-trailer load by helping it become far more stable. I've included a video of our team installing a strap behind a 2014 Toyota Prius on a bike rack and a cargo carrier to better illustrate how it works. Draw-Tite does not have this requirement, though...
view full answer... - Recommended Class II Trailer Hitch for 2014 Toyota AvalonBoth hitches are Class II, with a 3500 lb towing capacity. The Curt hitch has a slightly higher tongue weight capacity, at 350 lbs, versus the 300 lb tongue weight capacity of the Hidden Hitch # 90031. Both hitches would install in the same manner. The Curt # C12107 features a crossbar that's constructed of tubular steel, while the Hidden Hitch # 90031 uses square tube steel. For both hitches, the entire length of the hitch crossbar and the receiver will be visible below the rear bumper...
view full answer... - Largest Trailer Hitch Available for 2014 Toyota Camry HybridThe largest trailer hitch that fits a 2014 Toyota Camry Hybrid (or even non-hybrid) is a Class II hitch with a 1-1/4 inch receiver, made by Draw-Tite or Curt: - Draw-Tite Trailer Hitch Receiver # 36540 - Curt Trailer Hitch Receiver # C12107 These are the biggest hitches anywhere for this vehicle as something with a 2 inch hitch and larger capacity just isn't feasible for a sedan. The amount of torque and pressure put on its frame would be too great for the larger capabilities of a 2...
view full answer... - Recommended Trailer Hitch Receiver for 2016 Toyota Camry HybridWe do have one hitch that is confirmed to fit your 2016 Toyota Camry Hybrid, which is the Curt Trailer Hitch Receiver # C12107. This is a custom-fit Class II hitch with a 1-1/4" receiver. It has a maximum tongue weight of 350 lbs which is great for any accessories like the Thule Hitching Post Pro # TH934XTR. This hitch features a bolt-on installation with the included hardware and a gloss black powder coat finish. It also comes with a limited lifetime warranty. I have attached a review...
view full answer... - How to Transport a Heavy Kayak with a 2012 Toyota CamryI have a solution for you. First, though, a roof rack coupled with a kayak carrier is not a viable option. It looks like a fully-assembled Old Town Sportsman Bigwater PDL 132 weighs 117 pounds, which is more weight than even our best kayak carrier can handle. Instead, I suggest going with a watersport trailer. I recommend the Malone EcoLight Sport Trailer for a Heavy Kayak, part # MAL73FR. It can handle up to 400 pounds and is much safer way of transporting and loading your heavy kayak....
view full answer... - Installing Receiver Hitch on 2014 Toyota Avalon HybridYou are correct, installing the Curt Class II Receiver Hitch, # C12107, on your 2014 Toyota Avalon Hybrid would require you to trim the heat shield and plastic underbody panel. Draw-Tite offers a custom fit hitch for your Avalon but according to the notes, installation would still require the trimming. I have attached the installation instructions for the Draw-Tite Hitch, # 36540, for you to take a look at.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Lori W
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Andrew L
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
10/19/2023
Couldt be happier with the product.