Aluminum Sendel Hi-Spec Series 03 Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2
(75 reviews)
Price: $128.94
In Stock
Aluminum Sendel Hi-Spec Series 03 Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2
Item # AM22327
Our Price: $128.94
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (75)
- Q & A (0)
- Photos
Sendel Trailer Tires and Wheels - AM22327
- Wheel Only
- 14 Inch
- 5 on 4-1/2 Inch
- Aluminum Wheels
- Boat Trailer Wheels
- Sendel
Sturdy, stylish aluminum trailer wheel is lightweight, provides superior corrosion protection and meets Department of Transportation standards.
Features:
- Durable, corrosion-resistant aluminum construction
- Hi-Spec series 03 design is unique and appealing
- Front and back of wheel are clear coated
- Improved clamp force (ICF) technology helps to keep wheel securely in place
- Bulletproof joint created between wheel and hub when properly installed
- No need to retorque after initial installation
- Attractive modular pattern
- High-quality wheel meets DOT specifications
Specs:
- Rim dimensions: 14" diameter x 5-1/2" wide
- Pilot hole diameter: 3.19"
- Bolt pattern: 5 on 4-1/2"
- Wheel bolt size: 1/2"-20
- Offset: 0
- Capacity: 2,200 lbs
- Lifetime warranty against structural defects
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
22327 Aluminum Mod Wheel - Hi-Spec Series 03 - 14" x 5-1/2" Rim - 5 on 4-1/2
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Aluminum Sendel Hi-Spec Series 03 Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - AM22327
Average Customer Rating: 4.9 out of 5 stars (75 Customer Reviews)
Sturdy, stylish aluminum trailer wheel is lightweight, provides superior corrosion protection and meets Department of Transportation standards.by: Jan06/05/2022
Good quality wheel
We ceramic coated them before installation for added protection as we mostly use the boat in salt water
by: Doug09/02/2023
Whees, lugs and stems showed up in just a few days. Everything was perfect. Mounted tires and installed on trailer. Wheels look great. Chose not to order wheel caps since I really didn’t need them. Great price and fast shipping! Ready to roll!
by: Mark 03/15/2023
Very satisfied. Also, very much appreciate your follow-up inquiry. Very few retailers follow-up in this manner! Thank You!
Mark
3/16/2024
Working very well.
by: Jeffrey 10/19/2023
Just finished putting these rims on my boat trailer.The rims are a perfect match for my aluminum trailer! Your service was great and delivery was FAST! Will buy again!
by: Tom04/12/2024
Quick shipping, nice product and great price
by: Jeff04/26/2023
I would recommend your company to all my family and friends, my wheels came promptly but was damaged , notified customer service and they sent me another set of wheels within days and had my wheels on my trailer by the time to go boating. Thank you all for being responsible and very prompt on my purchase, 5 star from me and my family
by: Monny05/21/2022
These are excellent for. About trailer or others. The best part about these rims is that they don’t have dust caps that can retain water and cause corrosion. I’m extremely happy with the way they look on my boat trailer.
by: Ted 02/16/2024
Very nice wheels. I wish they weren't made in China
by: Kelly S03/25/2020
Good looking set of wheels... glad I bought them. I wanted a clean looking aluminum wheel...not too flashy... these are perfect!
by: Gregory07/17/2021
Not as shiny as I was hoping for, but definitely better than any other option I could find in a 14 inch wheel.
by: Eugene 07/19/2023
Great wheel looks fantastic.
by: Craig 07/09/2023
New rims for my boat trailer, they look really good. Thanks
by: Greg03/27/2023
Dealt with Martha when ordering my trailer wheels, very knowledgeable. Received the wheels within just a few days and they look perfect, can't wait to get them on the trailere, thanks, etrailer !
by: Dustin01/05/2024
Fast shipping !!!! Great Products!!!!
by: Martin06/21/2022
Quick shipping. Wheel looks really good. We will see how they hold up in salt water.
Martin
6/23/2023
These wheels are holding up very well. I am very pleased with the purchase and service I received.
by: Greg 04/27/2023
Customer service was better than excellent. Follow-up after an order is not too common, but etrailer was exceptional.
by: Matt02/03/2023
One of the valve stem’s I ordered had some parts missing. I contacted costumer service and they are sending me a replacement. My over all experience with etrailer has been very satisfying. 5 STARS.
by: David10/14/2018
I have purchased several hitches, wheels, trailer tongue locks, spare wheels, brackets and more.....
A-1 selection
A-1 quality
A-1 prices
A-1 customer service is “OMG” from
A M A Z I N G Tiffany
by: Willie01/28/2020
Everything was awesome the wheels came in yeserday as promised, I got them installed, and they look great, thanks for everything we'll be visiting your site again
by: David05/07/2022
I like to give 5 stars but also tell what to expect. The computer changed the ship date about 12 times. Customer service is pretty quick to reply email but they can't control the crazy computer. I inspected one wheel and it has a couple small nicks on it. They were good for the price. They are for a boat trailer. If and when I sell the boat, these wheels will add a lot of appeal to the boat/trailer combo.
by: Reginald 05/01/2021
Awesome product, and a beautiful looking wheel. But please stop putting stickers on them that contain glue!! Its a pain getting the glue off.
Reginald
5/2/2022
After a year, my wheels look as good as the day I purchased them! Tandem trailer, 4200lbs boat, backing in and out of saltwater, and not one sign of rust!! Im truly impressed with the quality of the wheels.
by: Larry 12/22/2022
The modular wheel is well crafted, and a very beautiful wheel. It will make my trailer look great.
by: Ashton03/07/2021
Very pleased with my purchase. Haven't had any balance issues, discoloring, dulling, or signs of wear and tear! My only small complaint is the stickers that come on the rims from the factory are EXTREMELY hard to remove. Googone and gasoline didn't do the trick. I pressure washed them at least a dozen times before the sticker film was no longer visible.
by: Guy 08/01/2020
New rims replace rusty steel wheels on my Casita travel trailer. The rims really look nice, clean and not too flashy. E Trailer is my go to for all my trailer needs.
25
312
Show More Reviews
See what our Experts say about this Sendel Trailer Tires and Wheels
- Which is a Better Wheel to Use in Saltwater - Steel, Galvanized, or AluminumAlthough the Dexstar Steel Mini Mod Trailer Wheel # AM20315 has a e-coat primer and black powder coat finish, this is option is much more prone to rust over an aluminum or galvanized rim. The powder coat finish is mainly for common trailer use so it doesn't have to be as resistant since saltwater typically isn't in the equation. When it comes to a good, better, best for saltwater resistance the powder coat doesn't really make the cut. Better is a galvanized finish like the 14" x 6" Americana...
view full answer... - Tire Recommendation for the Americana Aluminum Mod Trailer Wheel # AM22327Yes, the Americana Aluminum Mod Trailer Wheel # AM22327 that you referenced will work with a trailer tire sized ST205/75R14. For a tire in that size I would recommend the part # AM10235. See review video. This is a radial tire in a Load Range D. A radial tire flexes more than a bias tire, giving it better ground contact, traction, stability, and tread wear. A radial tire will normally run cooler than a bias ply tire, especially when the tire is under a load. A tire that runs cooler will...
view full answer... - Best Wheels For Saltwater on Boat TrailerThe best wheels for saltwater are going to be aluminum wheels because they do not rust. I would not recommend using a steel wheel like the # AM20315 you were looking at. It might hold up if you meticulously rinsed it with fresh water and made sure to spray over/repair any scratches in the powder coat, but it is still unlikely. That would also be a lot of additional work. The Aluminum Sendel Series # AM25DR would be a good option for black. However, there aren't any completely black options...
view full answer...
- What is the Offset of a Trailer WheelTrailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A positive offset will move the tire closer to the trailer, while a negative offset will push the tire further away. Most of the trailer wheels we offer, including the Americana Aluminum Mod wheel you referenced, part # AM22327, have a zero...
view full answer...
- How To Determine If My Current Tires Will Fit This WheelYes, your tires should fit the HWT Hi-Spec Trailer Wheel, Item # AM22327, so long as they are 14 inch tires. A 5-1/2 inch rim is pretty common size for a 14 inch tire. I have attached additional information and videos for you to check out that should help with your project.
view full answer... - Rust Resistant Center Cap For Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel AM22327The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel part # AM22327 does not include a center cap. The pilot hole size is 3.19". I recommend to use Americana Trailer Wheel Center Cap - Stainless Steel - 3.19" Pilot part # AM90175 which is stainless steel for rust prevention. It also comes with a removable cap for EZ lube axles.
view full answer...
- What Is The Offset For The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel # AM22327The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel # AM22327 has a 0 offset and has a 14 inch diameter and is 5-1/2 wide. This wheel has a weight capacity of 1,900 pounds. If you have any further questions please feel free to reach back out to me anytime.
view full answer... - Goodyear Endurance or Kenda Karrier ST205/75R14 Tire for Boat Trailer at Higher Highway SpeedsIn terms of speed rating the Goodyear Endurance ST205/75R14 Radial Trailer Tire is certainly superior to the Kenda Karrier # AM10235, as it features an 87 mph maximum speed (compared to 81 mph on the Kenda). Based on your question, where it seems like you regularly dip into the 80's on the highway on the way to the ocean, this superior speed rating alone might be enough to make a difference for you. Otherwise, they are both good tires and both have 5 out of 5 ratings from our customers. For...
view full answer... - What Kind of Finish Does the Dexstar Steel Directional Trailer Wheel # AM20377 HaveThe Dexstar Steel Directional Trailer Wheel # AM20377 that you referenced is a powdercoated silver. For a rim in the same size with a finish as close to chrome as we offer you would want the part # AM22327 that is polished aluminum.
view full answer... - Replacement Wheels for Ranger Boat Trailer With 14" x 5-1/2" RimsFor a replacement rim on your Ranger boat trailer I recommend the # AM22327. This is a 14" diameter x 5-1/2" wide rim with a 5 on 4-1/2 bolt pattern. It also has corrosion protection with an aluminum construction and features a lifetime warranty against structural defects.
view full answer... - Lug Nuts for Aluminum HWT Hi-Spec Series 03 and Series S5 Trailer WheelThe Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel # AM22327 will use standard 60-degree cone lug nuts such as the Kodiak Trailer Wheel Lug Nut # KALN1375S. This is a stainless steel lug nut, which can be used with the aluminum HWT wheels because the wheels do already have a steel insert to prevent any type of galvanic corrosion. Then for a valve stem you can use the Americana Snap-In Valve Stem # AM20903 (up to 65 psi) or # AM20904 (up to 80 psi).
view full answer... - Availability of 14 inch Trailer WheelsWe have several 14 inch wheels available in a variety of finishes, but none of them are chrome. If you check out the link I attached to the right you will see all of the 14 inch wheels we carry. Probably the closest wheel we have to what you are looking for is the Americana Aluminum Mod Trailer Wheel # AM22327 that has a polished aluminum finish. While it's not quite chrome it is very similar. This wheel has a 5 on 4-1/2 inch bolt pattern. See link on determining bolt patterns if you are...
view full answer... - Availability of Aluminum HWT Mod Trailer Wheel in a 15 inch Diameter I attached a page that has all of the 5 on 5 inch bolt pattern 15 inch wheels we offer, but none of them are the Mod style wheel like the part # AM22327 that you referenced. Since the 5 on 5 inch bolt pattern isn't very common you might actually have a 5 on 4-1/2 inch bolt pattern. If so, you would then want the part # AM22627 as it is the wheel style you are looking for in a very similar size. I attached a review video for you to check out as well. I attached a help article that covers...
view full answer... - Maximum PSI for Aluminum HWT Hi-Spec Series 03 Trailer WheelA rim in and of itself is not rated for a specific psi. The valve stem is actually what determines the pressure a rim can withstand. You'll see some rims on our website that list a rating and that is because they include a valve stem. The Aluminum HWT Hi-Spec Series 03 Trailer Wheel, part # AM22327, that you asked about does not include a valve stem so you'll need to add them. To fit this rim we carry part # AM20903 rated up to 65 psi and part # AM20904 which is rated up to 80 psi.
view full answer... - Is There a Right and Left Side for the Lionshead Directional Wheel 274-000023The Lionshead Steel Directional Trailer Wheel - 14" x 5-1/2" - 5 on 4-1/2 - Smoke PVD Finish 274-000023 was just the one design so there will not be a right and left side wheel, unfortunately. If you wanted something to match on both sides, I have always been a fan of the modular style wheels, like the Taskmaster Steel Modular Trailer Wheel - 14" x 6" Rim - 5 on 4-1/2 - Black PVD Finish # 460545MBPVD or the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2...
view full answer... - Can You Pre-Mount Karrier ST205/75R14 Tire and Aluminum Hi-Spec Series S5 WheelThe Karrier ST205/75R14 Radial Trailer Tire part # AM10235 is a great option for the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel # AM22327. That said, we don't offer tire mounting services. The wheel/tire combos you see on our site come to us that way. Therefore, you'd have to take both the tire and wheel into a local tire shop for mounting. Please note, you'll also need the Americana Metal, Bolt-In Valve Stem part # AM20906 and I do recommend adding the Counteract Tire Balancing Beads...
view full answer... - Is there a Hub Stud Length Requirement for Americana Aluminum Mod Trailer Wheel AM22327The studs on the hub should be long enough to mount the Amricana wheel # AM22327 but you will need to use longer lug nuts such as # 12CLN-L because regular lug nuts will be too short and it will be difficult to get a socket on them.
view full answer... - Will a ST 21575R14 Tire Fit a Americana Aluminum Mod Trailer Wheel # AM22327 The Americana Aluminum Mod Trailer Wheel # AM22327 that you referenced will fit the ST 21575R14 tires you have. To determine if the wheel will fit your axle you will need to determine the bolt pattern of the hubs you have on your trailer. These have a bolt pattern of 5 on 4-1/2 inches. I attached an FAQ to the right that details how to determine wheel bolt patterns.
view full answer...
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Michael B
Installed by:
Jeff D
Installed by:
Andy C
Expert Research:
Jameson C
Written by:
Laura H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jan
6/8/2023
Still nice a year out however we do spend the extra time to make sure that they are thoroughly cleaned and dried every time they are dunked