Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Center cap fits your Lionshead trailer or RV wheel with a 4.25" pilot diameter. Opening on center cap provides easy access to your E-Z Lube axle for maintenance. Corrosion-resistant stainless steel construction.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Lionshead center caps for the trailer wheel. Now these caps are designed to improve the appearance of your trailer, and also keep the end of your hubs clean, so they're easier to maintain. Now, these are designed in three different sizes. These small one is LHCS102, that's going to be for the pilot hole, or the rim opening hole of 3.19 inches. The middle size, LHCS108, that works for the 4-1/4 inch pilot hole rims. And then for the larger size, we're going to have part number LHCS109, this is for the 4.88 up to 4.9 inch pilot holes. Now for the small center cap to fit inside, all of them are going to use the same size.
That part number is LHSI60C. Now, each of our center caps are designed to slide into the respective rim size, with a small flange around the back side that keeps it from passing through. Now, there are also four little raised edges here, as we tighten our rim down, those get compressed slightly, and that will keep this from moving around, rattling around, or rotating. You'll see, without the center cap installed, still going to give us a nice, clean look, and easy access into our easy lube hubs, or even barring buddies. The center cap is just going to be a pressure fit. There's a small notch in it, that you'll want to orient so you can find it.
Pop that on. It's going to give us a more clean look, kind of finishes that up. It's going to keep dirt and debris and stuff like that from getting in our cap. But then, just with a small, flat blade screw driver, we go to that little notch, you can see we can pop them off fairly easily there to gain access. Now, the center cap itself, and the cover are available as a kit, if you want to get them at the same time. You'll just use the part number for the cap size you need, which will be LHCS102, 108, or 109.
Then you'll put a dash behind that, and add SI60C, that will give you the cap and cover that will work for your rim. Then, not only is that stainless steel finish going to give us a nice look, but this is also a very corrosion resistant material, so we shouldn't have to worry about any corrosion. And we'll be able to clean them up nicely each time. And that will complete our look at the Lionshead line of center caps. Available with cover.
Average Customer Rating: 4.6 out of 5 stars (73 Customer Reviews)
Center cap fits your Lionshead trailer or RV wheel with a 4.25" pilot diameter. Opening on center cap provides easy access to your E-Z Lube axle for maintenance. Corrosion-resistant stainless steel construction.Received what I ordered. Nice replacements for my rusty hub caps on one side of my trailer. Going to look good for vacation! I popped my original inserts in fits as they should.
Haven't had a chance to use these because I just got them delivered today. They look and feel well made. Stainless steel should resist corrosion much better than the originals that were poorly chromed steel.
Rusting after a year, disappointing.
Wheels and center caps work great would recommend these to anyone wanting this product. Fast delivery from trailer . I have bought them twice to put on my Airstreams.
Wheel center caps are good but they didn't have the end center caps
Looks great with my new aluminum rims -- but be careful while tightening the lugs and use an extension so that you don't dent them -- they're made out of pretty soft metal.
ETrailer,
Received the products ordered on time and installed them on my Eagle Boat Trailer. I could not be mor happy with the product, they look great and the fit was also perfect. Much nicer than the stock plastic centers.
Thank you and your Staff!
Doug
they look great. stainless steel this time no rust.
Nice quality, looks great with the wheels.
When I ordered them I was unaware that
there were center caps that snap in. It was
Not clear that it was to be ordered separately.
I ordered this to replace one that I damaged while installing (very soft metal), but I'll take the blame as I should have used a socket extension to install (which I did on all the rest).
Looks great!
Decent center caps, fit well, made in China of course.
Wrong part. These caps are 5+inches. I Ordered the 4.25”
Tim
3/10/2024
Still looks good
William
10/17/2022
The perfect addition to an amazing tire & rim combo all from etrailer.
I called and talked to the staff, and they were very helpful. After talking to them I placed my order, it arrived on time, was prefect fit for my needs, and seems to be well made.i would also recommended this web site to anyone.
These made a huge difference in the overall look of my wheels. The previous ones had a lot of rust on them.
Cap shipment was delayed due to stock availability, received in good shape.
Fit the wheels good
all good, but I did think I was going to get the cap on the end. not true, I guess I need to order separate.
THANK YOU FOR THE SPEEDY DELIVERY! 2 OF THE CAPS WERE SCRATCHED UP OTHER THAN THAT ALL IS GOOD!!
They look great.
looks great just wish they came with the end plugs
Exactly what I ordered.
Good price and fitment.
The part was exactly what I needed.
Do you have a question about this Wheel Covers Hubcap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/11/2022
I will have our Customer Service team reach out to you.