Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"
(57 reviews)
Price: $375.25
In Stock
Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"
Item # 41947
Retail:$518.51
Our Price: $375.25
You Save: $143.26
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (57)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 41947
- Class V
- 2 Inch Hitch
- 15000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 1600 lbs TW
- 16000 lbs WD GTW
- 1600 lbs WD TW
- Custom Fit Hitch
Perfect for marine and heavy-duty applications, this vehicle trailer hitch receiver is strong, durable and corrosion resistant. Tested Tough guarantee ensures that the hitch exceeds industry standards.
Features:
- Custom fit is designed specifically for your vehicle
- Steel construction with computer-aided design ensures strength and durability
- Heavy-duty side brackets welded on
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 15,000 lbs
- Maximum GTW when used with weight distribution: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- Maximum TW when used with weight distribution: 1,600 lbs
- Maximum gross trailer weight: 15,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
41947 Draw-Tite Class V Ultra Frame Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2012 Ram 3500 Cab and Chassis
- 2010 - 2012 Ram 4500
- 2010 - 2012 Ram 5500
- 2008 - 2009 Sterling Bullet
- 1963 - 1980 Chevrolet C/K Series Pickup 8 Foot Bed with Standard Bumper
- 1981 - 1987 Chevrolet C/K Series Pickup 8 Foot Bed with Standard or Step Bumper
- 1985 - 2000 Chevrolet C/K Series Pickup Cab and Chassis
- 1988 - 1991 Chevrolet C/K Series Pickup Pickup - Standard or Step Bumper
- 1963 - 1980 GMC C/K Series Pickup 8 Foot Bed - Standard Bumper
- 1981 - 1987 GMC C/K Series Pickup 8 Foot Bed - Standard or Step Bumper
- 1985 - 2000 GMC C/K Series Pickup Cab and Chassis
- 1988 - 1991 GMC C/K Series Pickup Pickup - Standard or Step Bumper
- 2015 - 2021 Ford F-350 Cab and Chassis
- 2001 - 2014 Ford F-350, 450, and 550 Cab and Chassis
- 1999 - 2000 Ford F-350, 450, and 550 Cab and Chassis F-350 models
- 1999 - 2000 Ford F-350, 450, and 550 Cab and Chassis F-450 and F-550 models
- 2015 - 2021 Ford F-450 Cab and Chassis
- 2015 - 2021 Ford F-550 Cab and Chassis
- 2003 - 2009 Chevrolet Kodiak
- 2007 - 2012 Dodge Ram Pickup Cab and Chassis
- 2001 - 2013 GMC Sierra 3500 - Cab and Chassis
- 2014 - 2024 GMC Sierra 3500 Cab and Chassis
- 2007 - 2007 GMC Sierra Classic 3500 - Cab and Chassis
- 2007 - 2007 GMC Sierra New Body 3500 - Cab and Chassis
- 2001 - 2013 Chevrolet Silverado 3500 - Cab and Chassis
- 2014 - 2024 Chevrolet Silverado 3500 Cab and Chassis
- 2007 - 2007 Chevrolet Silverado Classic 3500 - Cab and Chassis
- 2007 - 2007 Chevrolet Silverado New Body 3500 - Cab and Chassis
- 2003 - 2009 GMC Topkick
California residents: click here
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" - 41947
Average Customer Rating: 4.2 out of 5 stars (57 Customer Reviews)
Perfect for marine and heavy-duty applications, this vehicle trailer hitch receiver is strong, durable and corrosion resistant. Tested Tough guarantee ensures that the hitch exceeds industry standards.by: Joe03/05/2023
2014 Winnebago Vista Motorhome
This thing is super beafy. It's fairly easy to install. I had to drill all 6 holes. I installed this on a 2013 Ford F53 Winnebago 35B. Definitely worth the upgrade.
by: Julian08/14/2023
1984 Chevrolet C/K Series Pickup
Carol,
You asked for a review, here it is:
1. Like so many others, my package arrived with holes and in terrible condition.
2. Inspecting the contents, the ears on the crossbar were bent and denuded of powder coating.
3. The plastic bags, overloaded with hardware, were torn and I will have to inventory parts to assure that all are there.
4. It looks like I will have to bend the ears back into place so the crossbar will fit between the frame rail mounts correctly. This is likely to remove more powder coating.
5. I will be installing the hitch shortly and will contact you if there are parts missing.
Shipping 70 pounds of fabricated steel in a single sided cardboard box without packing materials and without strapping is ludricrous. $3 of styrofoam block and $1 of strapping would have saved me time I will now have to spend to straighten the pieces for proper fitment. I hope you and your company are making loads of money because you clearly care nothing for your customers. The only question remaining is what you intend to do about these problems in the future.
Please do not send me a simpering apology filled with disingenuous statements or blame placed on others. Put your shipping team to work to design and package these shipments so that upon arrival at your customers' location they are intact and undamaged:
1. Double sided cardboard box.
2. Styrofoam sheets top and bottom.
3. Styrofoam blocks either side of crossbar limiting movement with pockets for hardware.
4. Styrofoam endcaps in the box.
5. Nylon strapping pulled tight around the sides and end of box.
What is better?
1. $5 less profit?
2. Unhappy customers?
These are decisions for your management team.
Katrina D.
8/25/2023
I'm sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.
Helpful Links
by: Alex08/14/2023
1979 GMC C/K Series Pickup
Don't recommend.
It did not fit my truck as described, I have a 79 GMC pickup, and it left a 1"+ gap between the receiver and the frame on the most inside holes.
On top of that the box arrived all messed up, no hardware, the receiver is pretty strong, but was all scratched out.
by: Rudy11/15/2023
1987 GMC C/K Series Pickup
Great company, for sure!! Bought this to install on my recently acquired 1987 GMC crew cab dually, to be used as a moving and tow rig to trailer my cars south. Installation was straight forward, a bit of drilling and rivet removal, which I was prepared for. Took a bit of time, as you may guess, but I was definitely able to skip the gym today because of it. Loses one star for chipping paint on the side pieces, I'll need to paint to prevent corrosion. Also, one tab on the crossbar was bent, so I had to straighten it to ensure the bolts torque specs were true. I'm very confident it will be up to the task at hand.
by: Paul03/11/2024
1982 Chevrolet C/K Series Pickup
I like the product but the packaging needs improvement.
Only missing one and the threads on some of the other bolts are damaged.
Jenny N.
3/16/2024
Oh my goodness! Customer Service will be in touch so that we can have the hardware shipped out to you.
by: Angel04/26/2023
2008 Chevrolet Kodiak
First one got lost in shipment, second one arrived last night. I have not installed it as of yet. It was received damaged.
Maybe a little better packing would help.
by: Jamie 02/28/2024
2005 GMC Sierra
Product worked great
by: David09/09/2022
The hitch looks well-made and very heavy duty my poor rating comes from the poor packaging and the hitch was damaged in transit. The end of the crossbar was sticking out of the box when it was delivered to my house there was not adequate packing in there to keep everything stabilized and there are many places where the paint is chipped off . The bracket on one end of the crossbar is bent due to the poor packaging and the fact that it came out of the box . I am very disappointed .
Heather A.
9/27/2022
I hate to hear that your hitch came scratched! I recommend to touch it up with a rust prevention spray paint. I sent our information to customer service and they should be reaching out soon.
by: David04/07/2019
2013 Ram 3500
Does fit my 97 3500 GMC cab and chassis with the second fuel tank, as promised. Unfortunately, it DOES NOT fit with my second fuel tank armor plate, which had to be removed for installation. I will do some cutting and hopefully be able to bolt it back up with 4 of the 6 bolts, which will be better than nothing.
This is a better hitch for a truck that is lifted a bit higher than mine, as I used the top-most holes for the cross member, and the side fins hang down a clownish amount. Hopefully it will not be a problem in my frequent off road uses. Unloaded, the fins are 13 1/2 inches off the ground.
A very beefy and solid thing, this should tow whatever I need it to, and in the end, function over form. Maybe I will work on a custom rear bumper that will help to hide it some.
David
4/8/2020
The side plates hit the ground when I would go over curbs, or try to back up a hill. It was a small problem, but still a problem. I sold the truck to someone who was going to OTR with it, and he loved it.
by: Jeane12/20/2021
2003 Ford F-350, 450, and 550 Cab and Chassis
Came in box all tore up and taped back together i have to repaint the hitch because it was slammed around and chipped it off
Sierra K.
12/21/2021
Customer Service will reach out to you.
by: Kent10/12/2018
Ford F-350 Super Duty
The hitch works great, but was not a simple install. None of the holes on the rails matched the frame on my chassis cab F350. I had to trim and make mods to this hitch to make it fit. Not what I expected at all. I am a metal fabricator by trade, so no big deal to me, but others wouldn't have the ability to install this hitch on the same truck as mine. The fit description needs to be reviewed and revised.
Mike L.
10/13/2018
Per the installation instructions, drilling is required to install this hitch on a 2011 Ford F350 Cab/Chassis, so the mounting holes in the hitch wont necessarily match up with existing holes in the trucks frame.
by: Kj08/14/2023
I git the part like you say I wood gate it on time I well tall to us you on part thank you and have a very nice day
by: Kerry E.05/30/2019
I don't want to discourage anyone from buying this hitch. That said, I probably shouldn't go into great detail, as to how I use it. I replaced a class III hitch on my motorhome, to carry a 700 pound motorcycle on a carrier. It it designed to fit 36 inch frames, but simply reversing the brackets, it now fits a 42 inch motorhome frame. Nuff said. It does the job very well.
by: Cowboy11/21/2020
Great product. Heavy duty. I had to drill 4 holes in frame. Looks good. 1987 Chevy V20 4wd 3/4 ton.
by: Rodney D.04/11/2019
2018 Ford F-350 Super Duty
The hitch is doing every thing I need it to do. The one problem that I had with it was. I was told it would fit a F-350 2018. With the mounting we had to drop the fuel tank, to get at the rear bolts. Also we had to add a 1/4" plate to both ends of the hitch, evidently the 2017 frame is a half inch narrower then the 2018 model. Once we did that everything went together with out any problems.
by: Brandon B. 10/23/2017
1987 Chevrolet C/K Series Pickup
Hitch came to me in good condition and looks very well built. However, I purchased this for a 1987 Chevrolet dually and it is not a fit for my truck. The first issue I found is with the spare tire. The side brackets are so deep there is no way to get around them to relocate the spare, they simply hang down too far. The hitch is at a good height in the uppermost holes. I attempted to install anyway only to find the center holes directly under a crossmember that would not allow space for a bolt to drop in. Overall looks to be a quality product for whatever its intended purpose just not workable on my square body dually. An expensive paperweight.
by: Theo G06/23/2020
Chevrolet
After years of comparison I bought this hitch for my US Army 1986 Chevy CUCV M1028 pickup. It had the right dimensions for simple mods to fit the truck, for which no commercial hitch will fit. We had to cut an L notch on both sides of the upright, to clear the shock mount. But there is plenty of steel there. By removing some of the bumper bracket, I was able to retain the bumper mount pieces, less 2.
by: Gerald05/01/2011
Excellant heavy product. It took a little fitting to the frame, only because this went on a military truck. Finished project is neat and will haul well
Joe
12/2/2012
did you install this hitch on a m1008 cucv? if so did you need to cut one set of bumper brackets? trying to find a hitch that I dont have to hack up the stock cucv bumper brackets to install
by: Mr. Galloway02/20/2017
1969 Chevrolet C/K Series Pickup
This hitch is being used on a custom 1969 Chevy C50 pickup truck. I won't be using this truck to haul, it's only for show. It was easy to install, and it looks perfect on the frame. You can't have a truck this big without a big hitch on it.
by: Mike M.08/21/2017
1986 GMC C/K Series Pickup
This receiver is well made and was not too bad to install. It should be noted that it is more of a "universal" hitch in that it fits multiple vehicles. This does require drilling holes in your truck's frame, which is not a difficult job, but it's not a direct bolt-on hitch. I had to make provisions for my true dual exhaust which added some time to the install, but overall it took about 3 hours to remove my rear bumper, the old class III hitch, and install this one. I use my 1986 GMC C3500 to tow my 24' enclosed car hauler.
by: David 01/13/2021
The product is great; of high quality. The delivery was prompt. I will do business with etrailer.com again
David M.
1/14/2022
fantastic
by: James07/30/2020
1972 GMC C/K Series Pickup
Ordered a Class V hitch, controller and wiring and actually received earlier than expected. Great customer service, had looked at one hitch which I thought would work and after talking to customer service purchased another recommend hitch which was best suited to my application.
by: Dale11/28/2018
1986 Chevrolet C/K Series Pickup
Instructions say you need a 9/16 drill bit to drill the holes for the hitch. In all reality you need 11/16 inch to drill the holes in the frame to mount the hitch. I actually used a 3/4 drill bit to complete the install.
by: Ron E08/15/2018
I received the hitch as promised. I have not tried the installation as of today but I have no reason to say anything bad or good concerning the product. So should any more opinions be needed, send another request a week from today and I will answer and I will answer at that time.
by: Peter08/08/2019
So far so good I truck pull and this is a strong hitch would by another and recommend
25
57
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Recommended Trailer Hitch Receiver, Trailer Wiring, and Brake Controller for 2002 Ford F-450 ChassisFor the weight capacity and ease of installation, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class V # 41947. This hitch is a confirmed fit for your vehicle. For your wiring harness, I recommend the 4-Pole Hardwire Kit with Circuit Tester # 18252 which will splice into your current tail lights. Then you will need # 10-2-1 sold by the foot to reach the factory run wires along the rear frame rail along with the Hopkins Endurance Quick-Install Trailer Connector Adapter...
view full answer... - Trailer Hitch Recommendation for a 2011 GMC Sierra 3500 Cab and ChassisI checked with Draw-Tite and they do list Trailer Hitch # 41947, as a fit for the Cab and Chassis model 2011 GMC Sierra 3500. The truck will need to have a 34 inch wide frame for this hitch, or any of the hitches listed for your vehicle, to fit (measured from outside to outside). I have included a link to the installation instructions for you. I have also included a link to all of the hitches listed as a fit for your truck. For a ball mount, I recommend the etrailer ball mount kit, #...
view full answer... - What is Vertical Height from Truck Frame to Hitch Tube on Draw Tite Hitch # 41947The Draw Tite hitch part # 41947 that you referenced actually is height adjustable. From the mounting surface (truck frame) down to the hitch opening can be 6-5/8, 8-1/4 or 10-1/4 inches.
view full answer... - Recommended Trailer Hitch, Wiring and Brake Controller for 1994 Chevy C/K Series Cab and ChassisThe Draw-Tite Class V hitch, part # 41947 will most likely work for you. The hitch has a drop (distance from the bottom of the frame to the top of the receiver tube) that's adjustable to 6-5/8, 8-1/4 or 10-1/4 inches. One of these distances should allow your receiver tube to clear the bottom of the back bumper, but you'll want to measure the distance from the underside of the frame member to the lowest point of the rear bumper. For wiring, you'd begin with a 4 pole, provided by # 118315....
view full answer... - Trailer Hitch Recommendation for a 1992 GMC 3500Draw-Tite trailer hitch # 41947 fits the cab and chassis models of the 1992 GMC 3500 trucks. These are the trucks that do not come with beds and are turned into utility trucks, ambulance vehicles, and similar things like that. These trucks have a narrower frame width than the pickup models. If your truck's frame width is 34 inches wide measured from the outside of one frame rail to the outside of the other then this hitch will fit. If you have a regular pickup model with a standard/step...
view full answer... - Receiver and Weight Distribution Hitch Recommendation for 1968 Ford F-250In order to use a weight distribution system you'll need to install a receiver hitch mounted directly to the frame of the vehicle. We don't offer any weight distribution systems that would allow you to utilize a bumper mounted trailer ball. If your heavy duty bumper is a standard or a step bumper, I'd recommend the Draw-Tite # 41947 which has a 1600 lb towing/16000 lb capacity if used with weight distribution. If you have a deep drop bumper, which is also called a cowboy bumper, use #...
view full answer... - Which Hitch Will Fit a 2001 GMC Sierra 3500 Dually Cab and Chassis?The Draw-Tite Ultra Frame Trailer Hitch # 41944 is designed for the standard 2001 GMC Sierra 3500 pickup, so it will not be the correct one for your cab and chassis. However, the Draw-Tite # 41947 will be. This is designed specifically for the 34 inch wide frames on cab and chassis trucks and will be the hitch I recommend. This is rated up to 1,600 pounds of tongue weight as well as 15,000 pounds towing, standard, and 16,000 pounds with weight distribution, so it can handle just about anything. With...
view full answer... - Trailer Hitch Fit on a 2019 Chevy C3500 Cab and Chassis 4x4 with Extra Fuel TankThe Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 will fit your 2019 Chevy 3500 Cab and Chassis 4x4 with extra fuel tank. The extra fuel tank will not change the mounting location of the hitch so it will work fine based on my research.
view full answer... - Gooseneck Hitch Option For the 1995 GMC C/K Series Cab and ChassisI do have an option for you but there is currently not a custom fit goose neck hitch available for the 1995 GMC C/K Series cab and chassis. Instead I recommend the weld on B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks part # BWGNRK1500 which will give you a 30,000 lb gooseneck ball on your flat bed. When you are done towing you can unlatch the ball, flip it over and store it in the gooseneck hole. I have attached the installation instructions of this hitch for your...
view full answer... - Heavy Duty Trailer Hitch that Fits 2000 Chevy Silverado 3500 Cab and ChassisWe do have bolt-on hitches that fit your 2000 Chevy Silverado 3500 cab and chassis like with the Draw Tite part # 41947 which could be welded on if you wanted.
view full answer... - Dimensions of Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting bracket is 30-1/2 inches. The distance between the mounting holes, center to center, is 3-1/2 inches for the closer of the two holes and 15-7/8 inches from the hole nearest the receiver to the rear bracket hole.
view full answer...
- Recommended Draw-Tite Trailer Hitch Receiver For 1969 Chevrolet K10 PickupBoth the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 and Draw-Tite Ultra Frame Trailer Hitch Receiver # 41938 are a confirmed fit for you 1969 Chevrolet K10 as long as you have an 8 Foot bed and both options will require some drilling for the installation. Since they both install in the same location both will fit the same, with the only differences being that the # 41947 will hang down lower due to the longer side bracket as seen in the included picture. My preference is the...
view full answer...
- Trailer Hitch for Towing with a 2012 Chevy TahoeThe only trailer hitch that was designed for your 2012 Chevy Tahoe is the Curt Trailer Hitch Receiver # C13161. The Ultra Frame Trailer Hitch Receiver # 41947 is a pretty big hitch that is designed for a 2012 Chevy Silverado 3500 cab and chassis model which is pretty different to what you have. With that being said, it looks like your Tahoe has a towing capacity range of 5,200 lbs - 6,000 lbs so since the Curt is rated for a max of 6,000 lbs you will be able to tow with your Tahoe to it's...
view full answer... - Highest Capacity Trailer Hitch for a 1986 Chevy K30 Cab and Chassis TruckFor a cab and chassis style 1986 Chevy K30 the highest capacity hitch would be # 41947 that you have referenced from Draw-Tite. Because the truck now has an 8 foot bed on it and another hitch, I cannot guarantee that it will fit. You will need to take a look at the instructions I have linked to determine if the attachment points required are free. If you can use the hitch I recommend the etrailer ball mount # EBMK2416. It comes with a ball mount, 2 balls, a hitch pin with clip, and a...
view full answer... - Dimensions for Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting bracket is 30-1/2 inches. The distance between the mounting holes, center to center, is 3-1/2 inches for the closer of the two holes and 15-7/8 inches from the hole nearest the receiver to the rear bracket hole. If you need any additional measurements,...
view full answer...
- Trailer Hitch for a 1998 R-Vision Trail LiteYour best option is the Curt RV hitch # 13703. It fits frame widths from 22 to 72 inches. It fits box, C-Channel, and I-Beam frames. And it can be bolted or welded on (welding should be done by a professional welder). Because of its versatility this hitch is going to be your best option.
view full answer... - Trailer Hitch Recommendation with High Capacity for 1976 Chevy K20 TruckThe highest capacity hitch we have for your 1976 Chevy K20 is the Draw Tite part # 41947 which has a capacity of 16,000 lbs and 1,600 lbs tongue weight. The tongue weight capacity of a hitch is the vertical load capacity the hitch has. So basically the amount of weight a coupler that can put on the hitch before failure.
view full answer... - Trailer Hitch for a 1989 Chevy R3500 Dually Crew Cab with 8 Foot Bed a 34 Inch Frame WidthIf your 1989 Chevy truck is a cab and chassis model (these are the ones that come without beds that are then turned into service vehicles, flat beds, and that sort of thing) then hitch # 41947 will fit for sure. But apparently, for 1989, Chevy trucks with a long bed and crew cab had a 34 inch frame width. So in this generation of GM trucks there are some pickup models that have the 34 inch frame. I also recommend etrailer ball mount kit # EBMK2416 which comes with a ball mount with a 3...
view full answer... - Install Instructions for Draw-Tite Ultra Frame Hitch 41947 on 2017 GMC Sierra 3500 Cab-and-ChassisThe 2017 GMC Sierra 3500 cab-and-chassis is a confirmed fit for the Draw-Tite Ultra Frame Trailer Hitch # 41947 so long as the truck frame width dimension is 34-inches from outside edge to outside edge. This frame dimension requirement applies to all hitches we offer for this vehicle, all shown on the linked page. Also linked are the instructions for this hitch which include specifics for your truck on page 5. I took that specific page and linked it for you. The red arrows point out the...
view full answer...
- Fit & Compatibility of Trailer Hitch for 1996 Ford F-450 Superduty Cab and Chassis w/34 Inch FrameRegardless of the trailer hitch you will most likely need to drill some holes. In addition to the # 41947 you were looking at, my contact at Curt and he told me that the Curt Hitch part # C15445 would work for your 1996 Ford F450 Cab and Chassis Super Duty. This model will not require you to bolt the wings to the hitch, they have already been welded on. The advantage to the adjustable Draw-Tite hitch is it allows for better bumper clearance. I have linked both above mentioned products...
view full answer... - What is the Width of the Horizontal Plates That Mount to the Vehicle Frame on the Draw-Tite 41947The horizontal mounting plate that mounts to the frame of your vehicle on the # 41947 is 2-13/16" wide and the mounting plates themselves are 11-9/16" tall. The holes on the horizontal mounting plates are 3/4" and 1-1/4" in diameter. Since the cross tube is 30-1/2" long, if the plates were flipped the total distance would be 33-5/16" from the edge of one plate to the edge of the other.
view full answer...
- What is the Distance From Frame to Crosstube on Ultra Frame Trailer Hitch Receiver 41947The Ultra Frame Trailer Hitch Receiver # 41947 has an adjustable cross-tube that allows the receiver to be moved into a variety of height adjustments. There are 3 locations on that this hitch can be mounted in (see attached photo diagram): Height from bottom of frame- to top of receiver tube Location 1 = 6-5/8” Location 2 = 8-1/4” Location 3 = 10-1/4”
view full answer...
- Trailer Hitch Recommendation For 2002 Ford E-350After speaking to my contact at Draw-Tite about your 2002 Ford E-350 Van, I recommend the Draw-Tite Trailer Hitch # 41906. It is a 2-inch receiver with a maximum gross trailer weight of 10,000 lbs and a maximum tongue weight of 1000 lbs. It is custom fit for your van and requires no welding for installation. I have provided a link to the installation instructions for this item as well as a link to a video showing the installation of this hitch on a 2003 Ford E-350 van. While it is a different...
view full answer... - 2005 Ford F150 Trailer Hitch RecommendationFor your 2005 Ford F-150 the Curt Hitch part # 13357 has been confirmed to fit your vehicle and is our most popular option so I would recommend it for you. It has been confirmed to fit all models of your vehicle so it would work with your frame setup. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joe
3/6/2024
Still going strong a year later. Super happy with this hitch and purchase.