THIS ITEM IS NOT A FIT FOR
2010 Subaru Outback Wagon
Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # 41929
Retail:$518.51
Our Price: $288.98
You Save: $229.53
2010 Subaru Outback Wagon
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (30)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 41929
- Class IV
- 2 Inch Hitch
- 12000 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 1200 lbs TW
- 15000 lbs WD GTW
- 1500 lbs WD TW
- Custom Fit Hitch
Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 12,000 lbs
- Maximum GTW when used with weight distribution: 15,000 lbs
- Maximum tongue weight: 1,200 lbs
- Maximum TW when used with weight distribution: 1,500 lbs
- Maximum gross trailer weight: 12,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
41929 Draw-Tite Class 4 Trailer Hitch Receiver - Ultra Frame
81533 Hidden Hitch Class 4 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2016 - 2024 Ram 2500 6-1/2 Foot Bed without factory hitch
- 2016 - 2024 Ram 2500 8 Foot Bed without factory hitch
- 2010 - 2014 Ram 2500 with factory hitch
- 2010 - 2015 Ram 2500 without factory hitch
- 2016 - 2024 Ram 3500 6-1/2 Foot Bed without factory hitch
- 2016 - 2024 Ram 3500 8 Foot Bed without factory hitch
- 2010 - 2014 Ram 3500 Pickup with factory hitch
- 2010 - 2015 Ram 3500 Pickup without factory hitch
- 2004 - 2008 Dodge Ram Pickup 1500 - with factory hitch
- 2003 - 2003 Dodge Ram Pickup 1500 - with factory hitch - built After 11/1/02
- 2004 - 2008 Dodge Ram Pickup 1500 - without factory hitch
- 2003 - 2003 Dodge Ram Pickup 1500 - without factory hitch - built After 11/1/02
- 2003 - 2014 Dodge Ram Pickup 2500 and 3500 - with factory hitch
- 2003 - 2014 Dodge Ram Pickup 2500 and 3500 - without factory hitch
California residents: click here
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 41929
Average Customer Rating: 4.4 out of 5 stars (30 Customer Reviews)
Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.by: Joe02/28/2024
The hitch is nice but….. shipping is not cool. Just wrapped in plastic wrap. All the edges need repainted. Bummer.
by: Hiten08/03/2018
2003 Dodge Ram Pickup
Excellent customer service by Troy H. at etrailer. Installed hitch on 2003 dodge ram 1500 SLT crew cab, 4.7L V8, bed size was 78". Instructions stated no drilling required for my truck, however, I had to drill 4 holes. It wasn't difficult, but, was challenging because I didn't have any help to install. UPS also damaged hitch during delivery, but, I had to move forward with the install.
by: John10/16/2021
I was pleased with the shipping time, with in the week I placed my order.
The reason for a 3 star is that the packaging ( clear plastic) was torn open ,and multiple chips in the black powder coating.
John
10/17/2022
Sorry to say, but it did not work out at all. It the description it only tells customer that it fits under the stock hitch at the bottom of page. I did not want to see two recivers on the back of my truck. And etrailer only offered to send a can of paint to fix the chips from poor packaging. It now has a dusty home in the did not work section of the shop.
by: John 09/12/2023
2024 Chevrolet Silverado 2500
Installation was simple. we only had to drill one hole per side.
by: Ryan O08/18/2017
This was easy to install! I will feel alot better when pulling my camper with this hitch! Great product!
by: Stephen11/16/2017
Very durable hitch at a very good price, very fast shipping too
by: Justin01/27/2023
2005 Dodge Ram Pickup
Looks good not shipped the greatest was wrapped not in box during shipping got wrapping ripped and some of the paint in now missing on hitch had to make sure bolts and nut were still there due to the plastic being ripped
by: Eric09/13/2023
0 0
Package was broken upon delivery. Part too heavy for the box it was shipped in. No damage to the product, however.
by: David 03/09/2023
Solid hitch and very easy to install
by: Ed Weeks02/01/2017
2007 Dodge Ram Pickup
Great hitch. The only thing that I had an issue was installing the rear most bolts, right at the read bumper mounts, once I loosened those bolts the hitch lined up just fine. Be for warmed the rear bumper can drop down. We feel much better towing our travel trailer now. The truck looks good with it there, other than having two 2" receiver tubes there. One of the best upgrades we done.
by: Lloyd11/20/2017
2007 Dodge Ram Pickup
Great customer service, Great product, Quick delivery, Good reference videos available. Only issue was video shows NO drilling required.... use existing holes in frame! 07 Dodge Ram has to have holes drilled in frame!!! NO biggie, just sayin!!!
Lloyd W.
11/20/2018
Great
by: Seth03/12/2022
2005 Dodge Ram Pickup
Install went fairly smoothly. I did have to widen the holes on my existing trailer hitch cross bar to fit the two 9/16 bolts through. I assume my hitch could be slightly tweaked from years of towing causing them not to line up well. I like how this hitch cross bar sits higher than other brands on here.
by: JT03/27/2019
I have had this hitch for a year now. I have pulled campers, car trailers and dump trailers as much as 10,000 lbs with no issues. It was easy to install only took about an hour. I am very happy with this purchase.
by: Travis04/01/2018
2007 Dodge Ram Pickup
I have always purchased towing and accessories from etrailer. This is the third truck I have put a hitch on. The product was great however the quality assurance of the packaging was lacking as I was given the incorrect nuts. Two of the four nuts were fine threaded instead of national coarse. This led to an issue mid-way through my install. The nuts only costed$ 2.00, but the time it consumed to retrieve them was frustrating .
by: Todd10/05/2022
2003 Dodge Ram Pickup
Did not fit was told by etrail I would have to pay $[XX] in freight to return it. I don't shop at etrailer anymore
by: Evan S04/24/2017
2008 Dodge Ram Pickup
Product excellent and built very well and it fit perfect under my factory hitch on my 2008 dodge ram the only reason it only got 4 stars cause it was a little tricky getting the bolts in the truck frame to mount the hitch and it took a little time but there probably is no cure for that problem just a little patience.
by: Bob S12/01/2019
excellent product, installation was easy. If there were more fish wires added to kit it would have made it easier.
by: Luke07/06/2022
Holds up really well! Was able to pull a car across the country with this bad boy! Only note would be that the box it came in was torn to shreds when it got to me. But no damage to the frame so I’m happy. Tanks.
by: Andy M.05/15/2019
This is heavy duty. It has worked for everything I need it for.
Install was pretty easy and instructions were straight forward.
The only complaint is that after being installed I noticed the receiver was welded a little at an angle which puts the ball a little of center. Not noticeable when towing but aesthetically annoying if your looking at it.
by: Douglas12/02/2019
The hitch worked well (5 stars) the packaging was poor so a lot of the paint was knocked off of the edges, so I had to buy paint to touch it up. etrailer offered to send a touch-up kit but I needed to install it the next day.
by: Bruce H05/18/2019
Dodge
Put on my 05 dodge power wagon for piece of mind for a long trip from ohio to wyoming pulling 26 foot travel trailer. Checked bolts a few times. Everything seem good. Help putting it would be a plus!
by: April09/11/2021
Customer service was excellent. Like many others mentioned the packing job was pretty bad . Lots of paint missing and pretty beat up when I received it . My pickup is a farm truck so that didn’t bother me but if you have a super nice pickup it would bother some people. I plan on spraying some paint over those areas to keep from rusting. I have bought a few things from etrailer and I will continue to do business with them . Overall I am happy
by: Deon08/06/2020
The package was delivered in a reasonable amount of time and I'm having it installed this morning. I was surprised that they got an item that big delivered to me in good time.
by: c.clark05/02/2012
got what i ordered quickly. everything fit. good instructions.draw tite makes a nice product.
25
30
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Weight Distribution System Recommendation for 2008 Dodge Ram 1500 BighornIf you have a Class IV hitch on your 2008 Dodge Ram 1500 it would be rated for use with a weight distribution system. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your...
view full answer... - Recommended Heavy Duty Trailer Hitch Receiver for 2003 Dodge Ram 1500The Curt Trailer Hitch Receiver - Custom Fit - Class V - 2" # C15572 is not a fit for your 2003 Ram 1500. It is only a fit for 2009 and newer models. For your needs, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41929 which is rated for 12K towing and 15K when using weight distribution and tongues weights at 1,200 or 1,500 with weight distribution. This is a very strong hitch that will meet your needs and not be an issue when using the Fastway...
view full answer...
- Can Replacement Install Hardware for Draw Tite Hitch 41929 be OrderedThe instructions for the Draw Tite hitch part # 41929 that you referenced are linked to this page for you to check out but for the install hardware you'd just need the part # RHK. Select Draw Tite on the product page from drop down menu and then enter the hitch number 41929.
view full answer... - Does Draw-Tite Trailer Hitch Fit 2011 Ram 3500 DuallyI verified with Draw-Tite that yes, the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41929 is a fit for your 2011 Ram 3500 dually. The hitch will bolt onto the frame of your Ram without any interference. I have added a link to the installation instructions for you as well which I recommend checking out of the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41929.
view full answer... - Trailer Hitch Recommendation for a 2004 Dodge Ram 2500 with Factory Trailer HitchThe factory hitch on the 2004 Dodge Ram is welded to the bumper beam on the truck. The bumper beam is a round, curved piece of steel. In order to remove the factory hitch it would have to be torched off and you would not want to cut off any of the bumper beam. The heat from cutting off the hitch could still affect the bumper beam so it is not advisable to remove the factory hitch. I recommend going with a hitch that is designed to fit beneath the factory hitch, like # 41929 that you have...
view full answer... - Does OEM Bumper Beam/Hitch Receiver Need to be Removed for Draw-Tite Hitch on 2008 Dodge Ram 1500Great news! The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41929 actually sits below the OEM receiver on your 2008 Dodge Ram 1500 so you don't have to remove anything for this installation! I have attached a clip from the installation instructions that gives an example of this.
view full answer...
- Class IV Hitches for 2018 Ram 1500, 2500, and 3500 Trucks I would be happy to help you find a hitch for your friends 2018 Ram Truck. We have a couple of options for class IV hitches depending on which model truck your friend has. I have listed them below and linked an installation video: Ram 1500: Draw-Tite Max-Frame Trailer Hitch Receiver item # 75232 Ram 2500 and Ram 3500: Draw-Tite Ultra Frame Trailer Hitch Receiver item # 41929
view full answer... - How Much Can a 2005 Dodge Ram 1500 with the 5.7L V8 TowIn order to find out if your vehicle is equipped to pull a certain trailer you will need to find the towing capacity of your vehicle and make sure the weight of the trailer does not exceed this figure. Now, there are several different towing capacities for a 2005 Dodge Ram 1500 with the 5.7L V8 that can range from 4,690 lbs to 9,150 lbs. If you can provide me with your cab style, transmission type, axle ratio, and gross combined weight rating (GCWR) then I could give you an exact capacity....
view full answer... - Trailer Hitch that Fits 2017 Ram 3500 without Factory HitchYes, the Draw Tite hitch part # 41929 that you referenced is a confirmed fit for your 2017 Ram 3500 without a factory hitch and would work well.
view full answer... - Installation Difficulty of Curt Trailer Hitch 15409 for 2006 Dodge Ram 2500 With Factory HitchYou will definitely be able to install the Curt Trailer Hitch Receiver - Class V XD - 2" # C15409 on your 2006 Dodge Ram 2500 yourself without the need for a professional. The reason for that is because no drilling is required to install the hitch, it will bolt on underneath your current trailer hitch, as you can see by the cut out of the linked installation instructions I added for you as well as a photo and review a customer sent in. The Curt is a Class V hitch, and to answer your other...
view full answer...
- What Rear Tie Down Does 2014 Ram 2500 Require if Factory Hitch Gets Replaced with Draw TiteYour Torklift tie down part # TLD3109 requires the factory hitch to install. If you replace the hitch with an aftermarket one you'll need a new rear tie down. For that you'd need the # TLR3500 for your 2014 Ram 2500.
view full answer... - Fit of Draw-Tite Class IV # 41936 Trailer Hitch on 2008 Dodge Ram 1500 Mega CabFor a Class IV hitch, I'd recommend the Draw-Tite # 41929. The Draw-Tite Class IV hitch you referred to, part # 41936 is a fit for cab and chassis trucks only. Cab and chassis trucks have a narrower frame than the regular truck models do, and therefore the hitch wouldn't fit your truck. I've linked you to the installation instructions. For a 12K rated ballmount, I'd recommend # 4281. For a 12K rated 2-5/16 inch ball, use # 19286 or # A-90 for a 2 inch ball.
view full answer... - Draw-Tite Ultra Frame Trailer Hitch Receiver for 2006 Dodge Ram PickupThe Draw-Tite Ultra Frame Trailer Hitch Receiver, # 41929 is a Class IV, 2 Inch Hitch and confirmed to fit the 2006 Dodge Ram Pickup. This will be used to replace an OEM hitch that has been damaged, removed for whatever cause, or used to upgrade from a factory hitch with a lower rating. You can definitely choose to remove the OEM component, removal or not does not effect this hitch installation. It designed to be mounted with the OEM in place if you choose to. But yes, you are correct,...
view full answer... - Trailer Hitch fit for 2013 RamAccording to Curt's installation instructions, their 13901 multi-fit hitch works on GM and Ford trucks, but not Ram trucks. I'd recommend the Draw-Tite # 75232 for a 1500 series or # 41929 for a 2500 or 3500 series truck. Both hitches are custom built to fit your truck, so you know they'll fit perfectly and have the best appearance possible. I've linked to a diagram of the fitment info from the installation sheets.
view full answer...
- Can I Tow a 5th Wheel Trailer on a 2006 Dodge Ram with a Suspension Lift KitTowing a fifth wheel trailer with a lifted vehicle such as yours does not work very well, and we do not recommend doing so. As you pointed out, the trailer will probably rub the bed of the truck or contact the tops of the bed rails, causing damage. Additionally, the lifted suspension could have altered the vehicle towing and load capacities. The trailer will also no longer be level which will make towing difficult and dangerous. You may be able to use a traditional frame hitch to pull...
view full answer... - Best Trailer Hitch for 2003 Dodge Ram 3500 with Aftermarket Drop BumperThe Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41929 could potentially work with an aftermarket bumper as the receiver tube has a significant drop. It would be the best option for this type of application. It measures 9" from the mounting flange to the top of the receiver tube. This will be the most amount of drop available for this application.
view full answer...
- Does Draw Tite Hitch part # 41929 Include Fishwire for InstallationYes, fishwire is supplied with the install hardware that comes with the Draw Tite part # 41929 that you referenced. This is confirmed in the install instructions link that I attached.
view full answer... - Trailer Hitch Recommendation for 2008 Dodge Ram 1500 SXTThe Curt hitch # 14070 that you referenced fits 3500 and up Ram trucks that are cab and chassis models not like your 2008 Dodge Ram 1500. You'd need a Draw Tite hitch like part # 41929 if you have the factory hitch or part # 75662 for if you don't have a factory hitch.
view full answer... - How Much Does Hitch Extender Reduce Tongue Weight CapacityThe answer is actually pretty simple, because using any type of hitch adapter, including a hitch extender, reduces the capacity of your trailer hitch by 50 percent, and that includes both the towing capacity and the tongue weight capacity. I am not certain what the tongue weight capacity of the hitch on your 2006 Dodge Ram 2500 is, but using the Curt Hitch Extender for 2" Trailer Hitches - 14" Long # C45795 or the Curt Hitch Extender for 2" Receivers -18" Long # C45796 will reduce that...
view full answer... - Does Draw Tite Hitch # 41929 Fit 2003 Dodge Ram 1500 With Towing BumperThe Draw Tite hitch part # 41929 that you referenced fits both the models of the 2003 Dodge Ram 1500 that have the factory hitch and models that do not have the factory hitch so it will work well and not require you to remove the rear bumper beam.
view full answer... - Fit and Compatibility of Trailer Hitch for 2007 Ram 2500 with Factory Hitch InstalledThanks for your pictures, this helped me identify that your hitch is a factory hitch on you 2007 Ram 2500. I can tell because of the design and the way the hitch is mounted to the cross-frame with a weld. I have linked all the hitches that will fit this factory hitch for you to check out. You will have both 2 inch and 2-1/2 inch receiver options. Which you would like will depend on your trailer setup. A great hitch if you wanted a 2 inch receiver would be the Draw-Tite # 41929. If...
view full answer...
- Trailer Hitch Recommendations for a 2004 Dodge Ram 2500 with Factory Trailer HitchThe factory trailer hitch on a 2004 Dodge Ram 2500 is not welded to the bumper but it is welded to a support beam that attaches the 2 frame rails so you would not be able to remove it. That is why I recommend a hitch designed to fit models that have the factory trailer hitch. Check out Curt trailer hitch # C15409. This is a beast rated for 2,550 pounds tongue weight and 17,000 pounds gross trailer weight but still with a 2 inch receiver. I have linked a video showing installation for you. Another...
view full answer... - Curt Trailer Hitch for a 2007 Dodge Ram PickupThe Curt Class IV Hitch, part # 14361 is a fit for your 2007 Dodge Ram Pickup 1500 Long Bed provided you don't have the factory installed tow package on the vehicle. If you do, you'll instead want the Draw-Tite Class IV & V Ultra Frame, part # 41929.
view full answer... - Recommended Trailer Hitch for a 2005 Dodge Ram 1500According to the owner's manual for your 2005 Dodge Ram 1500, if you will be towing more than 5,000 lbs but not more than 12,000 lbs then you will need to use a class IV trailer hitch with a 2" receiver tube opening. For this, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41929 which has a maximum gross trailer weight rating of 12,000 lbs. The Draw-Tite Ultra Frame Trailer Hitch Receiver is a custom fit for your Ram and it has a lifetime warranty. It also comes with...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Written by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Hiten
8/4/2019
Hitch is working perfectly and am very satisfied with the purchase from etrailer.