Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Trailer wiring included.
Features:
Specs:
Note: The included receiver attachment is only for hitch-mounted accessories and cannot be used for towing. To tow with this hitch, you must use the included ball mount attachment.
This Stealth Hitches trailer hitch includes everything you need to hook up your trailer for towing. The ball mount pops into the hitch's center block so you can attach your trailer's coupler to the hitch ball. The wiring harness lets you power your trailer's lights. And the safety chain loops let you attach your trailer's safety chains. A receiver attachment is included as well for those times you need to use a bike rack or cargo carrier instead of towing your trailer. This all-in-1 solution saves you the headache of scrambling for missing parts, so you can get on the road faster than ever.
Nothing can ruin the clean, stylish look of your vehicle like a giant piece of metal bolted beneath the bumper. Luckily, with the Stealth Hitches trailer hitch receiver, you never have to worry about messing up your vehicle's lines.
This hitch installs behind your bumper, keeping the cross tube concealed and leaving only the ball mount visible. Even better, the ball mount can be easily removed from the cross tube when it's not in use, so you won't see any trace of the hitch. This means that you can retain that clean, from-the-factory look for your ride, while still being able to tow your trailer on the next family road trip.
This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Both the ball mount attachment and receiver attachment can be installed and removed in seconds with no tools required. Simply pop the selected attachment's base up into the stainless steel block at the center of the hitch until it automatically latches in place.
Be sure to then press the lock on the side of the block to fully secure the attachment. When you're finished hauling, use the included key to unlock the latch. Then turn the handle on the block clockwise and remove the attachment. You can stow the attachments in a safe place like your vehicle's rear cargo area, or you can use a convenient carrying case (391CASEC - sold separately).
And when you're not using an attachment, the included hitch plug covers the center block's opening to protect the hitch's body from dirt and debris.
The included wiring splices into your vehicle's wiring harness, which is located in your rear cargo area, on the driver's side. Once you've made all of the necessary connections, insert the provided fuse into the in-line fuse holder.
Once installation is complete, the 7-way connector will mount beneath your hitch. A mounting bracket is included to attach the connector to your hitch.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 7-way connector itself - to help prevent corrosion.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.
Alternate Instructions
Average Customer Rating: 4.1 out of 5 stars (7 Customer Reviews)
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Trailer wiring included.
Great hitch! My wife loves the fact that it is hidden whenever the ball hitch is not connected. It wasn’t the easiest thing to wire on our 2017 Audi Q7 but otherwise not a bad installation. I like that it doesn’t rattle when in use and it isn’t difficult to install. I was a little hesitant the first time I used it to pull trailer with golf cart, wandering if it was fully engaged, but after a trial run I felt good about it. The first trip we took pulling the trailer was nearly 500 miles and have made the same trip two more times since. The hitch is a bit pricey but if you want it hidden whenever not in use this is the way to go. I hope eventually dealers will use or at least offer this or a similar type hitch.
The StealthHitch is excellent. If not for the wiring kit, if would have been installed in my Q7 in maybe an hour. The wiring kit was not good. The printed and downloadable PDF had completely inaccurate wiring instructions. I watched the video on eTrailer and the installer did everything almost 100% different than the printout down to the printout said “there is no brake light for this car it just uses it the two turn signals.” Completely wrong.
I still have to install a wired brake controller so we’ll see how my first tow goes in a few months.
In all photos the hitch is in even the photo where the bumper looks stock. It’s there.
Love this hidden hitch. Maintaining ground clearance was of paramount importance to me, and this unit fits the bill perfectly. I've pulled a 5600 lbs trailer with my 2019 Audi Q7 with zero concern for the safety of my payload. The ability to remove the ball when not in use is ideal for this weekend warrior.
If I could wish for one thing, it would be the ability to order with the high-rise ball mount by default, but now I've got two different ball mounts for different loads!
Great service from etrailer. Product shipped promptly, was packaged properly, and arrived in perfect condition.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
11/1/2021
The instructions are saying the vehicle does not have separate brake and turn signals as they are together.