Refrigerator Vent Latches - Thin Wall - Qty 2
(81 reviews)
Price: $14.31
In Stock
Refrigerator Vent Latches - Thin Wall - Qty 2
Item # 372235
Retail:$22.84
Our Price: $14.31
You Save: 37%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (81)
- Q & A (0)
- Videos (2)
- Photos
JR Products Accessories and Parts - 372235
- RV Refrigerators
- Refrigerator Vent Latches
- JR Products
Thin wall vent latches replace worn or damaged latches on your RV refrigerator exterior or interior converter doors. Works with walls up to 1/16" thick. Includes 2 latches.
Features:
- Thin wall vent latches replace worn or damaged latches on your RV refrigerator exterior or interior converter doors
- Works with walls up to 1/16" thick
- Includes 2 latches
- Lifetime warranty
00235 JR Products Refrigerator Vent Latch - Thin Wall
Video of Refrigerator Vent Latches - Thin Wall - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for JR Products Refrigerator Vent Latches Review
What's up everybody, it's AJ with etrailer.com. Today, we're gonna be checking out this refrigerator vent latch from JR Products. It's just going to be a replacement part that goes in one of the corners here of your refrigerator vent. We got one that broke, so we're ready to pop that one out. So we're gonna remove the vent and replace it with this one. So just go ahead and take it back out of its spot.
And you see, this is the backside, this one. We're gonna go ahead and replace this one too, just because we got two of them in the pack. This one's not broken, but just wanna put the new ones in and get it set back up. Let's check it out. So now we came back inside so we can have a tabletop to kind of work on, easier to show you how to pop these out.
So this one's not broken, but what we're gonna do is get a Phillips screwdriver and just kind of pry up on that top part, see how it starts to pop out on its own, and then you don't need the screwdriver anymore. You can kind of twist it with your hand and it'll pop out. So we've got our new ones here. We're gonna kind of do the opposite. And pull that pin back out, that way this section can clamp in a little bit smaller and then push it into place, just like that.
You can rotate that, push it in further and you've replaced it. Comes in a kit of two, so you have both of them we're gonna replace. Just gonna go and do the same thing for the other one, and then we can go put our vent back on outside. I'm back outside, I just slid the vent back into place. And with these up and down, you can see it goes right there in a place.
Then I'll come back with my Flathead screwdriver, twist that, and that locks it in. And now you can't remove the vent, and it's nice and tight. Overall, it's a good replacement part to have. You don't want the vent rattling as you drive down the road, and these are quite common to break, so they're easy to replace. That's another good thing. Just make sure you look at your vent and see which clips you have. You can look at the ones you have, like let's say one broke so you can take the other one out and look at it. There's thin and thick versions of this. We have both of them on our website, just look. If it's a really thin plastic, you're gonna need the thin ones, depending on your vent cover. And if it's a little thicker then you're gonna go with a thick one like we use today to keep this vent in place. Well I think that does it. Thanks for hanging out and hope this helped..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Refrigerator Vent Latches - Thin Wall - Qty 2 - 372235
Average Customer Rating: 4.8 out of 5 stars (81 Customer Reviews)
Thin wall vent latches replace worn or damaged latches on your RV refrigerator exterior or interior converter doors. Works with walls up to 1/16" thick. Includes 2 latches.by: Al02/23/2023
A perfect fit and looks great too. Keeping an old travel trailer looking newer is as easy as replacing some of the small things that the weather takes a toll on.
by: Jeff04/18/2024
I just bought a 2009 Jayco RV that used these clips to hold the refrigerator vent. The existing looked like they were old and brittle and would break, so I bought these as replacements before tried to remove the existing. price was cheap so I bought both the thick and thin. The arrived quickly, but when I removed the existing they didn't break. lol. So this are still in the package as a spare. but look exactly like the existing ones.
by: Alexander 04/12/2023
They were just the part that I needed. Better than stock!
Alexander C.
4/13/2024
The part has survived and works like new
by: Peter08/07/2022
They worked great, little learning curve, almost broke one. I have these on my trailer but I needed this for my home air return vent
Peter
8/8/2023
Update on learning curve, just watch their video for replacement, I didnt so it was more difficult. Dont use a Phillips screw driver, use a flat one.
by: Steve07/01/2023
We have an older Lance Truck Camper who has the older version of the refrigerator vent latches. Couldn't find a replacement in our usual haunts in Tucson for one of our latches that broke. Everyone has the newer version! But etrailer came through like they have done for us so many times. They had the latch and we got it in time to go out camping! Thank you etrailer.
by: T&J Mobile RV Repair09/26/2023
Worked beautifully for a Replacement for our customer
by: MMBrad02/22/2022
Purchased both "thin" and "thick" sizes, just in case. Thick (3/16) is correct size for 2016 Thor Axis 24.1 frig vent; thin is probably for metal or very thin plastic covers. Fast delivery, fits perfectly, easy to install, and etrailer.com always has what we need.
by: Kenneth05/09/2022
Always a pleasure to shop for parts here. Fast delivery and reasonable prices. Will always shop here
Kenneth
5/10/2023
No issues
by: Bob06/15/2022
Perfect replacement!
Bob
6/16/2023
Still working as expected.
by: Tony06/02/2023
not much to tell. saw a missing clip, etrailer had them. ordered and installed.
by: Roger 05/19/2023
Exactly the correct item for my electrical panel catches.
by: Mark 06/09/2023
Worked great on exterior fridge panel
by: Cdr. Bob01/17/2021
Picture is misleading, however, if your not an RV tech you may not realize that what you rec is a 1 pc unit that you have to break apart and assembly to make it work and look like the picture. A picture before and after might help. Once assembled the item works well. Ordering and shipping was good, I would do business with these people again.
Cdr. B.
1/17/2022
Hasnt broken yet :
by: Fred03/02/2022
Items received were as described and were delivered promptly. Good transaction!
Fred
3/3/2023
Worked well.Still holding the door and no signs of degradation.
by: Philip 10/28/2022
Used this to replace my rv furnace interior vent door latch. Worked perfect
by: Joseph10/12/2022
The are my spare parts for then the refrigerator access door clasps fail.
by: Fred 05/16/2023
From ordering to delivery it was a fast dependable service
by: Scott 07/22/2020
Bought to fix a broken latch on my RV breaker box. Snapped right in and works awesome! Super fast shipping on a quality product.
by: Doug 12/08/2020
This is the 3rd or 4th item I’ve purchased from etrailer and each one has been good express. I’ve gotten what I wanted, in a timely manner. When I’ve asked questions, I got timely responses.
I’ll gladly continue to order my camper parts here.
by: Mark 04/11/2021
Works great. Glad you have these kind of replacement parts.
Also good to have extras on hand as well.
Thanks Mark
by: Ray07/15/2022
Work great for RV fridge vent clips that dry rot.
by: Ted05/09/2022
This vent latch worked perfectly as a replacement for my RV fuse box cover. I was concerned that I might not be able to find a replacement but this one worked great.
by: Don 07/23/2021
They were just what I needed to fix my refrigerator vent latches
by: Debra05/20/2022
Did the job fine the refrigerator vent cover hasn’t come loose again
by: Billy O04/22/2022
Great service. It can be challenging to get parts delivered to AK, but etrailer.com did this easily and quickly. Thanks.
25
81
Show More Reviews
See what our Experts say about this JR Products Accessories and Parts
- Determining Which Wall Clip You Need When it comes to installing wall clips in your 2013 Itasca Navion Motorhome the difference between the thin or thick wall clips is how thick the walls are in your motorhome. The Refrigerator Vent Latches - Thin Wall - Qty 2 # 372235 work with walls up to 1/16 inches thick. The Refrigerator Vent Latches - Thick Wall - Qty 2 # 372245 work with walls up to 3/16 inches thick. I attached a review video link below.
view full answer... - Will this Refrigerator Vent Latch # 372235 Fit for my Furnace Cover?Yes, the Refrigerator Vent Latches # 372235 will work for your furnace cover on your RV. Note that these are the thin wall version which work with walls up to 1/16" thick. If you have thicker walls up 3/16", use the thick wall version # 372245. Check out the video linked below for more details.
view full answer... - Replacement Refrigerator Vent Latches For RVI believe we do have what you are needing with replacement refrigerator vent latches. We offer a couple options, depending on the thickness of your wall. - Up to 3/16" Thick: Refrigerator Vent Latches - Thick Wall # 372245 - Up to 1/16" Thick: Refrigerator Vent Latches - Thin Wall # 372235
view full answer... - Difference Between Thin and Thick Wall Refrigerator Vent LatchesThe difference between the Thin Wall # 372235 and Thick Wall # 372245 refrigerator vent latches has to do with the recess in the clip themselves. The thin wall clips are designed for walls up to 1/16" thick which is generally your sheet metal walls. The thick wall clips are designed for walls up to 3/16" thick which is for most fiberglass gelcoat walls that are laminated to a thin luan sheet. You can measure the recessed area at the wall edge of your clip to determine which clip you need.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Andrew K
Installed by:
Kathleen M
Edited by:
Lindsey S
Video Edited:
Jacob T
Video by:
Chris R
Written by:
Mike S
Updated by:
Tim N
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Al
2/24/2024
The good news is nothing has changed. The vent latches still look and work the same as the day I installed them. Good product.