Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
(96 reviews)
Price: $34.03
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Our Price: $34.03
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (96)
- Q & A (0)
- Photos
2011 Mercedes-Benz Sprinter - Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port under the driver's seat.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connector end plugs into the built-in port under the driver's seat of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- 1-Year limited warranty
Installation of Tekonsha Brake Controller Adapter
To install your electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
The connector is located under the driver's seat. No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
306300 Tekonsha Dual Plug, Direct Install Brake Control Wiring Harness Adaptor
Replaces Tekonsha 3063-P
Item # 3063-P
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - 3063-P
Average Customer Rating: 4.8 out of 5 stars (96 Customer Reviews)
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port under the driver's seat.by: Frank06/14/2023
2022 Mercedes-Benz Sprinter
In case my first review posts, after an unsuccessful online chat with someone at etrailer, I called them and spoke with a very nice and knowledgeable man (unfortunately I didn’t catch his name). He walked me through the subtle differences between the 2nd generation Sprinter van 7-way factory plug and the 3rd (current) generation van which I have and via telephone I was able to get the Tekonsha adapter harness connected. Thanks etrailer!
by: Mr Mac Rides02/07/2024
Works great, following instructions and installed the trailer controller. Not all defaclut to install and the hardest thing was getting a 66 Year old kid in position to install it under the dash! I don’t bend as easy as I use too.
by: Terry 02/28/2023
This harness fits more years than noted, so long as you have the green factory connector under the driver seat. I thought shipping this item would take several weeks but E-Trailer had it out in just a couple days. A quality product that worked perfectly and was easily installed.
by: Alvin 04/27/2024
This made connecting my me REDARC Brake Controller easier than hard wiring.
by: Max 02/03/2024
This brake controller was so simple to install with help from etrailer.
It unit operats the electric brakes on my trailer great and I love that I can adjust the braking power from inside my motorhome.
by: Randy04/02/2023
Hello Alex. I appreciate the follow-up on my brake controller and wiring for my Sprinter van. The wiring was plug and play. It was s little difficult running the wires, but I got it. Again the wiring was plug and play along with the brake controller. I plugged it in and it immediately worked. I haven't towed the trailer with it yet, but will soon. Thanks again for the information on what to buy. You made the project so much easier.
by: Michael 12/09/2023
It's always a great day when you can plug and play! No cutting or splicing wire with this kit. Works great!
by: Christopher 01/03/2023
Mercedes-Benz Sprinter
Perfect set-up to add brake controller to my sprinter van
by: Paul 01/30/2024
2016 Mercedes-Benz Sprinter 3500
GOT THE RIGHT PART THANKS TO VEHICLE SPECIFIC LOOKUP. THEN, GOT THAT PART REASONABLY FAST. TIME AND ACCURACY ARE KEY WHEN YOU RUN A REPAIR SHOP LIKE OURS.
by: Jerry J01/28/2021
2021 Jeep Wrangler
Installed this in my 2020 Winnebago View (a 2019 MB Sprinter cassis and cab). I'm using it with a Brake Buddy Stealth controller. Routing it to the dash has a chore, but there are how-to videos on [online]. Most will simply lop off the Tekonsha connector and splice it directly to the pigtail wires on the Stealth controller. I chose, instead, to purchase a mating connector and add THAT to my controller, making the setup compatible with other popular controllers and removable without cutting wires. The Sprinter is pre-wired to "always hot" positive power, which means that you will always have power to the controller and a drain on your battery during storage. You can pull the fuse (in the panel under the driver's seat) or, as I chose to do, wire in a cutoff switch on the dash.
by: Paul02/02/2024
Great service !!!!!
by: Brian02/02/2024
Makes life easy
by: George G.07/21/2019
This product was supposed to eliminate any splicing of wires in my vehicle and the braking unit I purchased but does not. I will need to cut off one end and splice to the connector that came witht he braking unit. It maybe that this is not a standard connection but this cable was sold as a connection between the two. I do appreciate having the "pigtail" to the vehicles prewired connection.
Mike L.
7/23/2019
This wiring harness is compatible with brake controllers from Tekonsha, Tow Ready, Reese or Draw-Tite. The brake controller end wont be compatible with other brands, but as you said, you can always cut the plug off and splice up the wires, color for color.
by: Mark 06/18/2021
I was concerned that I would not be able to feed this through with both connectors on but found a nice way to lay in the bundle
Mark
6/19/2022
Still working great. Nomproblems
by: Doug05/29/2020
The adapter harness fit great, clipped right in at both ends. that said they 'cheaped ou't on the amount of wire in the harness, it fit but barely, life would have been so much easier if there was another 12" of wire.
The controller itself was just OK, nothing more. No on/off switch capability so it is always on if its in the harness. I wouldn't have purchased it had I known that, now it has to come in and out with each use so it doesn't bleed down the battery, what a P.I.T.A. Also the mounted bracket didn't really fit a Sprinter as suggested. I wish I would have purchased the DrawTight brake controller, lots easier fit into a sprinter junk tray.
by: Vick08/17/2022
This worked perfectly to make connecting my brake controller to my 2015 Sprinter 3500 a plug and play operation.
by: Mark04/12/2022
I have purchased many trailer parts from e trailer including bearings, rotors, seals all for boat trailers. Recently an electric controller. Service has always been excellent with prompt delivery and good pricing.
Thank you
by: Daniel05/10/2023
The adapter worked as expected. Plug and play. Routing was difficult but that iz a van specific issue.
by: Larry06/07/2022
The customer service from order to delivery was excellent!!! I ordered a brake controller for our new RV but did not want to install it myself. Erica helped me find a qualified installer in my area. Much appreciated!
by: Randy 08/18/2022
This worked great once I found the plug that was buried under the drivers seat. This is the only way to go in my opinion
by: Jonathan 04/29/2021
2020 Mercedes-Benz Sprinter
This made adding a brake controller to my sprinter van a lot easier. Unfortunately it’s not plug and play with the Redark controller, so I had to splice to the controller connections.
by: Gayle12/09/2021
the controller and wiring harness made this almost the easiest addon I have done. Hardest part was removing the seat off the base on the Mercedes Sprinter chassis. Wow, that seat is heavy. But, the installation was soo simple and the instructions completely accurate.
by: Stephen04/07/2022
2020 Mercedes-Benz Sprinter 2500
As usual trailer fills my needs for my trailering stuff. They always have what I’m looking for and into my hands in a few days or less.
by: Roy 07/01/2023
Fit perfectly. Works as designed.
by: Lars12/15/2019
Used this harness adapter to connect to the factory brake controller harness provided under driver’s seat in factory tow-optioned Sprinter van. Worked as advertised and connected a Curt Spectrum brake controller to said factory harness.
25
96
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Length of Brake Controller Adapter 3030-PThe # 3063-P harness is 5 feet long so you won't have an issue installing your controller 3-1/2 feet from the connector under your dash.
view full answer... - Troubleshooting Brake Controller Power Wire of Vehicle Not Having VoltageCheck under the hood of your vehicle and look for the fuse location in your fuse box labelled trailer brake controller. Most likely it's blown or missing since you don't have power for the brake controller circuit under the dash.
view full answer... - Adapter to Connect Prodigy P2 Brake Controller to a 2020 Winnebago Vita MotorhomeWe do! What you're looking for to connect your Prodigy P2 # 90885 to your 2020 Mercedes-Benz Sprinter 3500 is the Tekonsha Custom Wiring Adapter # 3063-P.
view full answer... - Adapter For Prodigy P3 Brake Controller on 2015 Mercedes-Benz Sprinter 2500 w/ Factory Tow PackageWe do indeed have the correct wiring adapter for your 2015 Mercedes-Benz Sprinter 2500 to go with the Tekonsha Prodigy P3 Brake Controller # 90195. It's different than the one that fits your '07 4Runner though, and the correct part number for your '15 Sprinter is the following: - Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # 3063-P
view full answer... - What Adapter Plug for Brake Controller on 2019 Mercedes Benz SprinterYes. The # 3063-P is the correct wiring harness to use when wiring in a brake controller like the Tekonsha P3 # 90195, or most other brake controllers. This harness will plug into the green 4 pin plug located under the driver's seat of your 2019 Sprinter. I've attached a photo to show this plug's location as well.
view full answer...
- Does 2023 Airstream RV Built on Sprinter Chassis Need to have Brake ControllerIf the trailer you plan on towing has brakes on it that would basically mean it's heavy enough that you are going to need to have the brakes operable which does require you to install a brake controller in your 2023 Sprinter. So for that you'd want the Prodigy P2 brake controller part # 90885 as this is a very reliable and great performing brake controller and to install you'd only need the custom harness part # 3063-P which is a fit for your vehicle as well and plugs right into factory wiring.
view full answer... - Troubleshooting No Power To Brake Controller Using Factory Wiring Harness on Sprinter VanThe Tekonsha Prodigy P3 Trailer Brake Controller # 90195 along with the wiring harness # 3063-P is all that is needed to add your controller to your Sprinter with Factory Trailer Plug. Since you are not getting power, you should check fuse F55 which is a 30 amp fuse.
view full answer...
- Tekonsha Prodigy P3 Trailer Brake Controller Will Not Turn On With a 2016 MCB Sprinter 2500For starters, if you have the factory brake controller wiring provisions then the correct wiring harness you will want to use with the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on your 2016 Mercedes-Benz Sprinter 2500 is the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3063-P. If this is what you have then there should only be power on the black wire entering the brake controller. If there is not then you have a short, there is a misplaced fuse, or...
view full answer... - Is There Difference Between Prodigy Brake Controller Part Numbers 90885C and 3063-9/3063-4The two part numbers are basically other retailers part number versions of the Prodigy P2 part # 90885 and # 3063-P. There is no difference.
view full answer... - Recommended Brake Controller and Adapter for a 2020 Mercedes-Benz 3500There is a kit technically that we have which includes both the adapter and the brake controller, but since it's a multi-product in our system there isn't any way to link a single product. So you'd need to add the adapter # 3063-P and the brake controller # 90195 separately, unfortunately. Also, the Tekonsha harness # 3063-P will work with TrailerMate, Draw-Tite, and Tekonsha brake controllers that have a built-in plug for the adapter to connect to.
view full answer... - Where Is The Brake Controller Plug On a 2019 Mercedes-Benz Sprinter 2500Yes, the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3063-P is the correct harness that will allow you to use the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on your 2019 Mercedes-Benz Sprinter 2500 without splicing. The plug that the harness will use is located under the driver seat. It is a green four pin plug which can be seen in the attached photo.
view full answer...
- Are There Instructions To Route Tekonsha Brake Controller Harness On Mercedes Sprinter 2500 The Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3063-P which is a fit for a Tekonsha Trailer Brake Controller like the Prodigy P3 part # 90195 on a 2018 Tiffin Wayfarer Motorhome with Mercedes-Benz Sprinter 2500 Chassis does indeed plug-in under the seat. In order to route the harness up to the dash where you would ideally be mounting the brake controller you'd need to find a path free from moving components. That said, the manufacturer does not provide exact instructions...
view full answer... - Wiring Adapter Needed For Installing Tekonsha Prodigy P3 On a 2021 Mercedes Sprinter 3500For your 2021 Mercedes-Benz Sprinter 3500 with the factory tow package you will need the Tekonsha Custom Wiring Adapter # 3063-P to connect the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. This harness is extra long as it is designed specifically to fit on this vehicle.
view full answer... - Where Is The Brake Controller Port Located on the 2019 Mercedes-Benz Sprinter 2500 For 3063-PThe brake controller adapter part # 3063-P that is used with the Tekonsha Voyager Brake Controller part # 39510 for the 2019 Mercedes-Benz Sprinter 2500 plugs in underneath the driver's seat. There is a green plug that you plug the adapter into. I have attached a photo for your reference.
view full answer...
- Transferring Prodigy P3 Brake Controller to 2015 Mercedes Sprinter 3500 With Tow PackageAssuming your Winnebago on the 2015 Mercedes-Benz Sprinter 3500 chassis has the factory tow package, there is a way for you to transfer your Tekonsha Prodigy P3 Trailer Brake Controller # 90195. The plug-in adapter that fits is the following part number: - Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # 3063-P The # 3063-P will plug in to a port that is actually underneath the drivers side seat. I recommend checking the directions I've linked below which...
view full answer... - Proportional Brake Controller for a 2011 Mercedes-Benz Sprinter w/ Factory Tow PackageThe Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is a proportional brake controller that has a plug-and-play installation using the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3063-P. This plug-and-play option is only available if your 2011 Mercedes-Benz Sprinter has the factory tow package. If you do not have the factory tow package, the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 would still work but you would have to splice in the included wiring...
view full answer... - Trailer Brake Controller Installation for 2019 Freightliner Sprinter 3500 With Tow PackageI recommend the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 and wiring adapter part # 3063-P for the 2019 Freightliner Sprinter 3500 with tow package. The Tekonsha Prodigy P3 Brake controller is a great option for the Sprinter because of it's storable settings that allows you to customize the settings for multiple trailers and heavier/lighter loads if you tow more than 1 trailer. The LCD display also display easy to decipher troublehsooting codes if something goes wrong with...
view full answer... - Does Brake Controller Install Harness for 2017 Mercedes Sprinter Require Additional WiringThe brake controller install harness part # 3063-P is the correct install harness for a brake controller in your 2017 Mercedes Benz Sprinter 3500. You would not need to do any other splicing or wiring beyond plugging the other end of the connector into a brake controller. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake...
view full answer... - Install Harness for Plug and Play Install of Prodigy P3 in 2016 Mercedes SprinterTo install the Prodigy P3 part # 90195 in your 2016 Mercedes Sprinter 2500 with the factory tow package all you need is the install harness part # 3063-P which plugs into the back of the controller and then to the factory brake controller wiring of the vehicle.
view full answer... - Correct Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers for a 2019 Ford E-450 ChassisWe do have the correct harness but the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3063-P is not compatible with your 2019 Ford E-450 Chassis. The harness that you will want to use for your 2021 Forest River Sunseeker 2850sle Motorhome Built on a 2019 Ford E-450 Chassis is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3034-P. This will allow you to use the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 as long as your motorhome has a factory...
view full answer... - Parts Needed to Install Brake Controller in 2023 SprinterI checked with Tekonsha and a few other brake controller manufacturers and they state that your 2024 Mercedes Sprinter 3500 does not have an OEM brake controller install port under the dash like previous models so you would have to hardwire in the Prodigy P2 # 90885 with the universal install harness it comes with and the brake controller install kit part # 5506 which wires to the OEM 7-way you have.
view full answer... - Will the Tekonsha Wiring Adapter for a 2019 Mercedes-Benz Sprinter 2500 Work On the P2 and P3The Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3063-P which is a fit for your 2019 Mercedes-Benz Sprinter 2500 will work on both the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 and the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. It will also work on pretty much any other Tekonsha, Draw-Tite, or Reese brake controller.
view full answer... - Install Harness to Easy Install of Brake Controller on 2012 Mercedes Benz SprinterFor your 2012 Mercedes Sprinter there is a port available for an easy brake controller install with the part # 3063-P and a proportional brake controller like the Brake EVN # TK63VR from Prodigy. I attached a picture that shows where you'll find the connector under your driver seat to install the controller.
view full answer...
- Parts Needed To Install Redarc Trailer Brake Controller on View Winnebago with Sprinter ChassisIn order to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on a View Winnebago with Sprinter Chassis you'll only need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3063-P. The factory brake controller port is located under the driver seat.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jacob T
Video by:
Dustin K
Video by:
Chris R
Video by:
Jonathan Y
Installed by:
Cole B
Test Fit:
Andrew J
Test Fit:
Bradley B
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Terry
3/1/2024
So glad I purchased. So little effort to install and it allowed the Tekonsha controller to work while pulling a trailer in Alaska. Very easy mod to our 2012 MB Sprinter.