What Adapter Plug for Brake Controller on 2019 Mercedes Benz Sprinter

Question

Question:

It’s the same on 2019 sprinter?

asked by: Francisco T

0

Expert Reply:

Yes. The # 3063-P is the correct wiring harness to use when wiring in a brake controller like the Tekonsha P3 # 90195, or most other brake controllers. This harness will plug into the green 4 pin plug located under the driver's seat of your 2019 Sprinter. I've attached a photo to show this plug's location as well.

expert reply by: Erik B

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

You are going to want the Master Lock Hitch Receiver and Coupler Latch Lock Set #1481DAT as it has an adjustable coupler lock which fits multiple coupler latch sizes. This like the etrailer Hitch Receiver and Coupler Lock Set #e99039 you found will…

view full answer...

Answer 3

The speed rating limitation for a trailer will come down to the tires, it has little to nothing to do with the axle, hub, or wheel size. That said, smaller tires generally do have lower speed ratings but you do not need to upgrade the wheels on…

view full answer...

Answer 4

German vehicles like the Mercedes Sprinters have trailer wiring that just does not like to work with LED lighting like what the Demco part #DM36MV provides. But thankfully we have an adapter that was designed to solve this problem with the Curt…

view full answer...

Answer 5

In order to use the Custer Wireless LED Light #LIW-LDTL-7B you just need a standard 7 way connector. I've attached a photo of what a standard 7 way plug is going to be wired like, as well as one of our helpful articles on wiring a 7 way plug…

view full answer...

Answer 6

The Custer Wireless LED Tow Bar Light part #LIW-LDTL-7B and Pilot Magnetic Tow Lights part #RM-2120 are both excellent options for magnetic tow dolly lights which are wireless so no wires between the vehicle and toad are needed. In regard to…

view full answer...

Answer 7

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with…

view full answer...

Answer 8

To install a Redarc Tow Pro Elite part #RED63RR on your 2021 Sprinter requires the install harness part #3030-P which at this moment is on back order. For a 2008 Sprinter the correct harness instead is the part #3063-P.

view full answer...

Answer 9

We do have a brake controller wiring harness that works with your 2024 BMW X5 without the factory tow package, and I verified with the manufacturer for you the correct part number is the following: - Tekonsha Brake Control Harness #20127

view full answer...

Answer 10

You can use rivet-mounted tracks to install a Rhino-Rack roof rack on your 2020 Winnebago View 24V motorhome, I'd just recommend paying special attention to sealing the roof where the rivets are. What you need first are the tracks, and with such…

view full answer...

Answer 11

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

What Adapter Plug for Brake Controller on 2019 Mercedes Benz Sprinter

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching