Troubleshooting Brake Controller Power Wire of Vehicle Not Having Voltage
Question:
BRAKE LIGHT SWITCH FOR THE BRAKE CONTROLLER FOUND THE PLUG UNDER THE DRIVERS SEAT FOUND GROUND, POWER, AND BRAKE FEED NEED STOP LIGHT SWITCH WIRE TO WORK NO FUSE DIAGRAM NO POWER WHEN VEHICLE IS RUNNING AT THE WIRE
asked by: MIKE
0
Expert Reply:
Check under the hood of your vehicle and look for the fuse location in your fuse box labelled trailer brake controller. Most likely it's blown or missing since you don't have power for the brake controller circuit under the dash.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Master Cylinder And Shock For UFP A-60 / A-75 / XR-84 Surge Brake Actuators
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Availability Of a Keyed Alike Hitch and Coupler Lock With a Coupler Latch Lock Wider than 1/2"
- Q&A: Where is the Trailer Brake Controller Plug on a 2020 Mercedes-Benz Metris
- Q&A: Why Wouldn't Demco Wireless LED Tow Bar Lighting Kit DM36MV Work with Mercedes Sprinter
- Article: Flat Towing Package for 2010-2011 Jeep Liberty
- Q&A: How is the 7 Way Plug on the Custer Wireless LED Tow Bar Light Wired
- Q&A: Can Wireless Towed Vehicle Lights Be Used with Tow Dolly Lights
- Q&A: Comparing the Curt Spectrum Brake Controller to Redarc Tow-Pro Elite
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop