Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram
(795 reviews)
Price: $25.54
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram
Retail:$41.16
Our Price: $25.54
You Save: 38%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (795)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with proportional brake controllers and certain time-delay brake controllers from Tekonsha
- 1-Year limited warranty
Note: To illuminate your vehicle and trailer brake lights when you activate the manual override on your brake controller, use in conjunction with the Tekonsha brake controller converter with 7-way adapter (30235-P - sold separately). Required for use in the state of California.
Installation of Tekonsha Brake Controller Adapter
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
302400 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces Tekonsha 3024-P
Item # 3024-P
Installation Details
This Product Fits The Following Vehicles
- 2015 - 2022 Ram 1500
- 2019 - 2024 Ram 1500 Classic
- 2015 - 2022 Ram 2500
- 2015 - 2022 Ram 3500
- 2016 - 2022 Ram 4500
- 2016 - 2022 Ram 5500
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram - 3024-P
Average Customer Rating: 4.9 out of 5 stars (795 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Dan03/19/2020
Installed in my 2020 Gladiator and used the 3024P adapter(you must switch the black and blue wires!) it works perfect. Yes i cut a hole in my new truck but it is out of the way and you can easily access it.
Shipping was timely product was excellent.
by: Brian07/03/2019
Great product clipped straight into factory wiring harness. Ram 1500 Classic Tradesmen 2019
Brian
7/5/2020
No problems excellent product
by: Ed R.03/13/2017
2017 Dodge Ram Pickup
I purchased a new 2017 Ram 1500 and was looking for a break controller. My son recommended the Tekonsha Prodigy 2 . I found it on etrailer.com at a better than expected price and ordered the controller and the wiring harness. I received the item in four days. It was a breeze to install. Truly plug -and-play ! Set up was a snap and I like not having to level the device every time , as with my previous controller !
I am very satisfied with my purchase and with etrailer.com !
by: Matthew02/14/2020
Just wanted to throw it out there for reference for any future searches. This was for installation on a 2020 RAM 1500 (DT) which did not have a factory tow package or brake controller installed. I reviewed the e-trailer installation video on a previous Gen RAM and it said the plugs would be right above the gas pedal. At first, I couldn’t find the OEM harness plugs; There weren't any plugs just hanging out in that area.
When I got my package yesterday, I decided to take another looksee.
This time I easily found it. Looking from under, I could see the two plugs snuggly taped together with black material, not electrical, tape. Looking up from my under dash position they were slightly to the left and up. If you have huge hands and forearms, it may take some positioning, and skin cuts, to get to. Luckily I don’t, but took a little finesse to get the tape off. Once I got that off, there was plenty of room to work and plug my adapter harness into.
The brake controller came with a mounting bracket and sheet screws to mount somewhere. Under our dash, there’s a metal dash screw right about the gas pedal that works perfect to mount the bracket. I put on a zip tie as well to make sure it was extra secure. Zip tied the extra slack of the OEM harness and adapter harness under the dash.
Very easy install.
by: Marty 02/20/2024
The wiring adapter plugged right into my truck I didn't time myself but it didn't take me but 10 minutes or so to install the brake adapter
by: Tim07/31/2015
2010 Dodge Ram Pickup
2015 ram 3500 truck.took all of like 10 min. To install and that's just taking my time.the 4 pin plug for the truck is just above gas petal.plug in the adapter to the truck.route the wires how you wish to run them.mount the controller where you wish to mount it which i utilized the panel screw for mine rather than put a hole in my new truck.plug in to controler zip tie the wires and your done.I read forums where people make a big issue out of this.truth is it's nothing to it.plug and go.hope my pics are helpful one showing the 4 pin plug,the mount location, and wires zip tied up.I like the mount type for the primus iq. Wouldn't be no problem swap g it to a different truck.I have not used it towing yet to review that part.maybe I can later
by: Evan 02/26/2024
Etrailer was very responsive to questions and getting the right parts. Only problem was delivery timing and that was usps. Install was no problem.
by: Jon W06/26/2019
2019 Ram 1500
Product was exactly what I needed. I sold my old truck with the wire still in it (different make) all I needed a new one for this truck. 5 min of searching and I knew I found the one. 2 day shipping and it arrived on my doorstep. After 10 min of pulling at wires and tape behind my dash I found the right ones. Plugged it in and wham it connected right away (only to tell me I had a broken wire on my trailer brakes, but that's another story).
Good product, fast shipping, A+
by: Gerald 02/22/2024
The controller was extremely easy to install. Great product, plug and play
by: Jeff04/23/2021
easy install took longer to get tools out than to put in definitely plug and play with wiring adapter
by: Nathaniel07/07/2021
I love that someone has a head on their shoulders to make the adapter to awesomeness and trailer hauling glory
by: So far so good :) 04/13/2019
2015 Dodge Ram Pickup
Install was simple with provided factory match jumper. Total 10 mins to install on 2015 Ram 1500. Still need to configure settings otherwise purchase and install simple along with great price.
So :.
4/14/2020
perfect
by: Al02/27/2018
2017 Dodge Ram Pickup
Plug and play. Gotta love it! My 2017 Ram 1500 didnt come with a factory brake controller and I didnt want to spend a lung buying it and having it put in. I found a Primus iq second hand on the cheap and needed the wire harness to make it work. Installation was a breeze and it looks and works great. I saved big $$ and am very happy. Lori B made it happen for me. She was very nice and gave me her direct line when I needed to call back and had the wiring sent out asap. Very satisfied. Thanks Lori B!!
by: Loretta 01/25/2021
2019 Dodge Ram Pickup
This wiring adapter make it so easy to hook up my brake controller. I took my old brake controller (Primus IQ) out of my old truck which had to be hard wired and installed it on my 2019 Ram 1500. It was so easy, just plug and go, worth every penny.
Loretta
1/26/2022
Smooth breaking, works great was such an easy install
Steve B.
8/2/2022
Wiring adapter worked perfect
by: Richard07/17/2020
2019 Dodge Ram Pickup
Easy install with matching wire harness for your vehicle. This controller with proportional braking is a lot of tech for the money and can be programmed easily in a few minutes for your trailer applications. I installed this on my 2019 Ram 1500 Laramie in 1/2 hour, most of that time was figuring out where I wanted to mount the unit. Works flawlessly, and can be be removed from the bracket in a minute and stored in the glove box (if you use the plug in wire harness to match your vehicle. This is a much better controller and several hundred dollars less than a dealer installed controller.
Richard N.
7/18/2021
This wiring harness was a perfect plug and play for my 2019 Ram. Worked flawlessly, minutes to install.
by: Daniel 02/12/2024
2015 Ram 1500
I've been very satisfied with this. No problems at all. Recommend
by: John04/20/2023
2019 Ram 1500
The controller came with everything I needed, and it was basicly plug and go. I did have to install the box, but no problems. The frame had places , so I took two screws loose and simply put them through the controller frame and into the place below the steering wheel where they came from.Good to go.
by: Steven06/13/2020
This morning's project, etrailer.com, delivered in three days, perfect fit, one recommendation, secure the hitch with the two factory bolts on each side, then fish the remaining four bolts into place
by: Jason H.05/19/2016
2015 Dodge Ram Pickup
This is on a 2015 ram outdoors man  install was about 10 min.  very simple!!!!!  truck pigtail is right above right foot covered in a foam tape next to what i think is the factory brake control harness.  Thank You E-Trailer!!!!!!!
by: Preston01/16/2024
Easy to install and worked great
by: Jerry11/17/2018
2019 Ram 1500
Part was an exact fit....Have yet to have any problems any time I order trailer parts from your company.
by: Michael08/29/2021
This harness was delivered in a large box with other items. The part itself was in a padded Manila envelope that looked as if it had been delivered by Ace Ventura. The wiring was damaged, which needed to be repaired before use. Unfortunately, I needed to use the harness that day and didn’t have the time to send it back for an exchange.
Brooke M.
9/8/2021
Thank you for bringing that to our attention! Customer Service should be reaching out to you in the near future.
by: Gill02/10/2023
2019 Dodge Ram Pickup
Easy to install. On a Dodge Ram truck the cable you need to connect to is hidden away under the center part of the dashboard, and you will suffer confusion, disbelief, and the betrayal of your helper until you fall triumphant and bloodied upon the floor of your shop (or driveway, no judgement..) with your prize in hand.
If it helps.. imagine yourself to be the automotive Indiana Jones.
After that, click the adapter cable into your controller and drive a test run with your trailer. Circle the block a few times screaming like a Viking who just survived his first time out with a raiding party.
by: Matt 09/05/2022
2016 Toyota Prius
This made the install very easy. I was able to toss the wiring parts that came with the brake controller and just plug this in on both ends and go on with my day. Picking where I wanted to mount the controller took longer than installing it
by: Robert Zirkle 09/13/2017
I am very pleased with this kit only to 5 minutes to install. Easy to follow instructions on install this product. Works great tow are camper every weekend. Would recommend it to everyone.
25
795
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Which Brake Controller Install Harness is Recommended for a 2015 Ram 1500The adapter needed to install your P2 brake controller # 90885 in your 2015 Ram 1500 is the part # 3024-P. This would not be the same as what you have for your 2010 Ram so you would need to go with the # 3024-P.
view full answer...
- Installing a Tekonsha Brake Controller on a 2018 Ram 3500 With Factory PortsThe Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram # 3024-P will snap directly onto a plug under the dash of your 2018 Ram 3500. Once it is snapped onto that plug, it will then need to be snapped into the port on the back of the Tekonsha P3 # 90195. You will then be completely connected and good to go. I included an install video of the # 3024-P and # 90195 being installed on a 2015 Ram 3500 for you to check out as well.
view full answer... - Which Plug-In Wiring Adapter Is Needed To Install Tekonsha Voyager 39510 In 2018 Ram 1500?The plug-in wiring harness to install a trailer brake controller in your 2018 Ram 1500 will dependent on which trailer brake controller your have. If you have the Tekonsha Voyager # 39510 you were looking at you will need the Tekonsha Plug-In Harness # 3024-P. This harness will plug into the factory trailer brake controller port underneath the dash of your truck and then plug directly into the Voyager taking care of all of the required wiring. If you have a different brand controller...
view full answer... - Which HydraStar EOH Kit Is Compatible With The OEM Controller In My 2016 Ram 2500?The factory trailer brake controller in your 2016 Ram 2500 is compatible with the Hydrastar Marine Electric Over Hydraulic Actuator without the # HBA-CAM so you will just need the EOH Kit # HS381-9067 as it is the version without this. With that said we have found the factory trailer brake controllers like you have in your truck are not the most reliable with EOH actuators, so if you find you have issues your best bet will be replacing the controller with the Tekonsha Prodigy P3 # 90195...
view full answer... - Will Installation of Tekonsha Primus IQ Brake Controller Affect Computer of 2017 Ram LaramieAfter installing the Tekonsha Primus IQ Brake Controller # TK90160 and custom adapter # 3024-P, you will need to simply adjust the power to the trailer brakes so they are not too hard nor too soft. I've included a cut-out from the complete installation instructions attached at the bottom of the page, which list the steps you'll need to follow to do this. Aside from that, there isn't anything else you'll need to do to start using the brake controller. It will not have any effect on the...
view full answer...
- Correct Harness and Install Location for Tekonsha Primus IQ Controller On 2019 Ram 1500 ClassicThe Tekonsha Primus IQ Trailer Brake Controller part # TK90160 is an excellent option for a 2019 Ram 1500 Classic when used with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3024-P which will make for plug-n-play installation. The plug you'll need to locate for the brake controller harness will indeed be located under the dash near the steering column. I have attached an install video to assist.
view full answer... - Troubleshooting Intermittent Working EOH Brakes with 2020 Ram 3500 Brakes AppliedIt sounds like you either have an older time-delayed brake controller or perhaps some wiring problems with your current setup. It is my understanding that pretty much all time-delayed controllers, like the Draw-Tite Activator IV # 5504, aren't compatible with EOH systems which might be why it works intermittently. If this is what you have then I highly recommend using a newer system that is designed for EOH systems as well. The Prodigy P3 # 90195 is a great option for a bigger truck because...
view full answer...
- How is Tekonsha 3024-P Brake Controller Harness Unplugged from 2017 Ram 1500I'd be happy to help you with that. The gray plug on the # 3024-P brake controller wiring harness that plugs into the socket under the dash has a small tab on it that needs to be pressed down and held before the plug can be removed from the connector. A small straight-blade screwdriver is the perfect tool for this. I've provided a photo showing the tab I'm speaking of.
view full answer...
- Brake Controller and Wiring Harness for a 2016 Ram 3500For your 2016 Ram 3500 I recommend the P3 brake controller # 90195 and wiring harness # 3024-P. The P3 brake controller works with electric and electric over hydraulic braking systems. This brake controller also has easy to understand diagnostic messages so you won't have to look up codes. The harness will allow you to plug the controller right into the truck; no hardwiring required.
view full answer... - Where is the Brake Controller Port on a 2019 Ram 1500The brake controller port on a fifth generation 2019 Ram 1500 is located behind a trim piece on the center dash panel which I have attached a photo of for you. For a brake controller, I recommend the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885. The Tekonsha Prodigy P2 is extremely reliable and even if something were to happen not necessarily to the brake controller, it has diagnostic checks to help you find out what the issue is and safeguards to protect your vehicle, trailer...
view full answer...
- Parts Needed to Convert to Electric Over Hydraulic Disc Brakes on 2018 Grand Design 5th WheelTo get your electric drum brakes converted over to an electric over hydraulic dis brake set up, the HydraStar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi # HBA16-252-82 is a great place to start. This includes all the lines/fittings needed for a single or double axle trailer as well as the actuator and the break away kit as well. To complete the system, you will need the Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs # K2HR526D....
view full answer...
- Should 5:00 Position of 7-Way on 2018 Ram 1500 Be ActiveThe 5:00 position of a 7-way is for a brake controller output circuit to activate trailer brakes which you'd have to have a controller installed on your 2018 Ram 1500 for that circuit to have voltage on it. You'd need a controller like the # TK63VR with the install harness part # 3024-P and that circuit would be active to control your trailer brakes.
view full answer... - Can Prodigy P3 Brake Controller Install in Place of Integrated 2018 Ram 2500 ControllerTo install an aftermarket brake controller on a 2018 Dodge Ram that has the factory integrated controller you will have to disconnect the ITBM (Integrated Trailer Brake Module). Doing so will turn on a warning lamp on the instrument cluster. In order to disconnect the ITBM and not get the warning lamp, your local Dodge dealer will have to reconfigure the TIPM (Totally Integrated Power Module), of the truck. Once the TIPM has been reconfigured, and the ITBM has been unplugged, you can use...
view full answer... - Can I Use Tekonsha P3 Brake Controller From Older Truck In 2019 Ram 3500 and How To Reset itYou can use the Tekonsha Prodigy P3 Brake controller part # 90195 in your new 2019 Ram 3500. Brake controllers are not so much vehicle specific as the adapter that is used to plug them into the vehicle. The Tekonsha P3 will plug into a port under the dash on the driver's side of the 2019 Ram 3500 with part # 3024-P. I have attached photos and a video for your reference. The Prodigy P3 can be reset by unplugging it for 15 minutes.
view full answer...
- What is the Right Brake Controller Adapter for my 2019 Ram 1500 New Body StyleYes sir that is exactly what you're going to need for your truck. The adapter you selected part # 3024-P is designed to plug in under the dash of your new Ram and will deliver all of the necessary connections for you to operate your trailer brakes. It is designed to work with all of the Tekonsha brake controllers. To use it you will locate the factory connector at the right side of the steering wheel just under the dash it will be taped to another harness there so just pull it down and...
view full answer... - Can P3 Brake Controller Install in 2015 Ram 5500 with Factory Controller for Use with EOH BrakesThe Prodigy P3 # 90195 will fit your 2015 Ram 5500 and will operate your electric over hydraulic brakes MUCH better than your OEM controller. The OEM controllers rarely work well with the EOH setups but the P3 works really well with them. So to install this controller in your truck will require the # 3024-P install harness. Once you disconnect the factory unit a code will appear on your dash. This error code does not affect operation of the Prodigy but if you want to clear it you will...
view full answer... - Does Brake Controller Install Harness Wire Colors Match Vehicle Harness Colors of 2018 Ram 1500The brake controller install harness part # 3024-P is the correct install harness for your 2018 Ram 1500 and it's colors aren't going to match what the vehicle side of the connector will have. The colors of the # 3024-P represent the standard brake controller install colors for the aftermarket but the vehicle manufacturers swap colors all the time. For a brake controller (if you don't have one), I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake...
view full answer... - Recommended Brake Controller for a 2018 Ram 1500 LimitedWe have quite a selection of brake controllers that are compatible with your 2018 Ram 1500 Limited! Out of our available selection I recommend going with the Redarc Tow-Pro Elite # RED44FR with the plug and play adapter # 331-TPH-020 for 2 reasons. The first is that it has 2 different braking options for your trailer; one is for proportional braking and the other is user-control (more like time-delayed). This allows you to have your trailer brake at the same time and intensity as the brake...
view full answer... - Trailer Brake Controller Wiring To Move Tekonsha Brake Controller To Multiple VehiclesTo allow customers to use your Prodigy P2 Brake Controller # 90885 you will need to have different wiring harness connectors for multiple vehicles and they would need to have the factory tow package wiring under their dash. For Ram use Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram # 3024-P. For Chevy/GMC use Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3016. For Ford use Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 22292. For...
view full answer... - How Does a Brake Controller Install on a 2016 Ram 1500 with a 7-WayTo install a brake controller in your 2016 Ram 1500 with a factory 7-way like the Prodigy P3 part # 90195 all you would need is the install harness part # 3024-P. To install the controller you will need to locate the vehicle’s electric brake control harness connector. The harness will be located underneath the dash and right of the steering column, taped to another harness. There will be a 4-pin connector that mates with the one on the adapter. I attached a picture of what it looks like. It's...
view full answer...
- Where Does Brake Controller Install on 2019 Ram 1500If you check out the picture I attached you can see where the brake controller install port is on our 2019 Ram 1500. The install harness you need is the part # 3024-P to install the Prodigy P2 part # 90885 that you referenced.
view full answer...
- Location Of Factory Brake Controller Connector On 2016 Ram 1500 The factory plug for the brake controller on your 2016 Ram 1500 is located under the dash above the accelerator. You do not have to remove any trim panels on the truck to get to the connector. I have attached a photo captured from an installation video for a brake controller on a 2016 Ram 1500. I have also attached a link to the installation video for a # 90195 brake controller and # 3024-P plug-in adapter you can check out. go to about the 3 minute 20 second mark and it is explained...
view full answer...
- Troubleshooting 2016 Dodge Ram 1500 Brake Controller Problem With Draw-Tite Activator IIThe Draw-Tite Activator II Brake Controller will not work properly with your 2016 Ram 1500. There is something in the wiring of the newer vehicles that doesn't give the voltage needed for some of the older model brake controllers, so you will need to upgrade. I've linked the page to all of our brake controllers compatible with your truck. You will still be able to use the # 3024-P wiring harness adapter for brake controller if you already have that. My recommendation for a brake controller...
view full answer...
- Replacement Brake Controller for 2017 Ram 3500 with Integrated Brake ControllerSounds like you have eliminated the problem down to being related to the integrated brake controller. Does your trailer by chance have disc brakes? Sometimes integrated controllers don't like electric over hydraulic actuators. The P3 part # 90195 and the P2 part # 90885 are basically the same controller internally, but the P3 has a more comprehensive gauge display and offers more settings options. The harness you need is the part # 3024-P. If your truck came from the factory with an OEM...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Rachael H
Updated by:
Alexander C
Updated by:
Hannah L
Updated by:
Michael B
Updated by:
Isabelle B
Installed by:
Cole B
Written by:
Wilson B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dan
3/19/2021
Still working great!