Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

See what our Experts say about this Roadmaster Base Plates

• Roadmaster Base Plate Kit Recommendation for 2006 Chevy TrailBlazer Blue OX Rangefinder II Tow bar
  You could use a Roadmaster base plate kit with your Blue Ox Rangefinder II but you will need to use a Blue Ox Rangefinder II to Roadmaster Bracket Adapter # RM-037. For a base plate kit you will need a Roadmaster XL Base Plate Kit # 3109-1. This kit is confirmed to fit your 2006 Chevy TrailBlazer as long as it is not an SS model. The base plate kit # 1418-1 that you referenced is not confirmed to fit your vehicle and would not work for you. For more information on supplemental braking...
  view full answer...
• Parts Needed to Flat Tow a 2001 Jeep Cherokee with a Roadmaster Falcon 2 Tow Bar
  The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 1418-1 is confirmed to fit your 2001 Jeep Cherokee. It will work with your Roadmaster Falcon 2 Tow Bar # RM-520, using the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars # 910021-00. The Roadmaster Inc 510-1 you have is the Roadmaster Crossbar-Style Base Plate Kit # 510-1, which is the base plate kit for an older model Honda Civic. This will not be involved in setting up your Cherokee. You will also...
  view full answer...
• What is the Best Solution to Tow a 2001 Honda CR-V Just 1 Time
  To be quite honest with you, it would probably end up being cheaper to rent a car trailer if you are only going to tow the vehicle once. But I will be happy to go over the parts required to flat tow your 2001 Honda CR-V.
  view full answer...
• Can Front Mount Trailer Hitch and Base Plates be Installed on 2001 Jeep Cherokee at the Same Time
  With base plates installed on your 2001 Jeep Cherokee, # 1418-3 or # 1418-1, you will not be able to also install front mount trailer hitch # 65009. The issue is that both the base plates and the hitch install in the same place and occupy much of the same space so both cannot be installed at the same time. The same goes for Curt hitch # 31084. Neither the base plates nor front hitches are designed for or rated for being stacked or sandwiched. They are all meant to be in direct contact...
  view full answer...
• How to Flat-Tow a 2000 Jeep Cherokee using the Roadmaster XL Base Plate Kit Part # 1418-1
  If you need to replace the removable arms for the Roadmaster XL Base Plate Kit part # 1418-1 that you have on your 2000 Jeep Cherokee then you are going to want to use the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS. Unfortunately, I do not have any way for you to attach your Smittybilt Tow Bar to the Roadmaster XL Base Plate Kit. You may be able to use something like the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part # RM-033 but as we have not tested...
  view full answer...
• Base Plate Kit, Tow Bar, Safety Cables, and Light Kit Recommendations for a 1995 Jeep Cherokee
  We have two base plate kits available for your 1995 Jeep Cherokee. Both base plate kits are only for models that do not have a brushguard. First is the Roadmaster Standard Base Plate Kit, # 1402-1. But if it were my Jeep, I would go with the Roadmaster XL Base Plate Kit, # 1418-1. The XL series brackets attach to the towed vehicle frame and provide attachment points for tow bars. The visible portions of bracket can be removed when not towing. Please note that trimming of spoiler, air...
  view full answer...
• Flat Towing Base Plate Recommendation for 2000 Jeep Cherokee
  I'm assuming you're speaking of a Roadmaster Stowmaster 5000 tow bar, is that correct? If that's the case, you'll want to use the Roadmaster XL base plate, part # 1418-1 which fits Cherokee models that aren't equipped with a brush guard. In addition to the tow bar and the base plate, you'll also need safety cables like # RM-643, a taillight wiring harness like # RM-15267 and a portable supplemental braking system like the Roadmaster Even Brake # RM-9400. I've linked to an install video...
  view full answer...
• Availability of Replacement Drawbars for Roadmaster Base Plate Kit # 1418-1 on 1998 Jeep Cherokee
  To order replacement arms for your Roadmaster base plates you will need # RM-ARMS. I have linked the instructions, which is actually a form that you will need to fill up in order to ensure that the new arms fit the base plates.
  view full answer...
• Recommended Parts Needed to Flat Recreational Tow a 1998 Jeep Cherokee
  If you would like to get a bumper for your 1998 Jeep Cherokee you can, but you will most likely need an adapter as well as the Blue Ox tow bar. I recommend just going with a regular base plate system so that you avoid having to make sure your bumper is properly rated to flat tow. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. I recommend going with the Roadmaster...
  view full answer...
• Parts Needed For Flat Towing 2001 Jeep Cherokee Behind Motorhome
  In my research, I found several references that stated if your 4 x 4 2001 Jeep Cherokee has a neutral position in the transfer case it can be flat towed. The only caveats I was able to find in the forums was that folks recommend starting the Cherokee at every fuel, food or rest stop and letting it run for 5 minutes or so. I was unable to find an online copy of the owner's manual to confirm, so you might want to check with your Jeep dealer. To flat tow your Cherokee, you'll need a tow bar...
  view full answer...
• Can 2000 Jeep Cherokee Sport 4x4 be Flat Towed behind Motorhome
  I did some checking and all versions of the 2000 Jeep Cherokee 4x4 are flat towable without speed restrictions. The only specific step I was able to find was that whenever possible start the engine of the Cherokee and let it run for 5 minutes to allow the battery to recharge. I wasn't able to pull up an online version of your owners manual so best option is to check out the recreational towing section of the owners manual in your glove compartment. For a base plate kit you'd then want...
  view full answer...
• Which Flat Towing Base Plate Kit for 1992 Jeep
  Which model Jeep is your 1992? For a Cherokee, you'd want to use the Roadmaster # 1418-1. For a Comanche, use # 1401-1. For a Wrangler, use # 1409-1. I'll link you to some help articles about flat towing that you might find helpful.
  view full answer...
• Can Blue Ox Tow Bar be Used With Roadmaster Base Plates on 1998 Jeep Cherokee
  So long as your Blue Ox tow bar is one of the following - Acclaim, Adventurer, Aladdin, Alexxa, Allure, Alpha, Ambassador, Avail, Aventa, Aventa II, Aventa LX, or Kar Bar - you an absolutely use an adapter with the Roadmaster Crossbar-Style Base Plate Kit # 1418-1. These base plates, which do fit your 1998 Jeep Cherokee, are the "XL" model base plates, so you will need both an adapter and quick disconnects for your Blue Ox tow bar: - RoadMaster Base Plate to Blue Ox and Demco Tow Bars...
  view full answer...
• Will Towing 1992 Jeep Cherokee 4x4 on Car Dolly Require Drive Line Disconnect
  I spoke with my contact at Roadmaster and he said in order to avoid damage to the transmission you must disconnect the drive shaft or install a lube pump on you 1992 Jeep Grand Cherokee 4x4 when towing with the RoadMaster Tow Dolly with Electric Brakes, part # RM-2050-1. You can also flat tow your Jeep Cherokee. If you would like to go with this option you will need Roadmaster XL Base Plate Kit # 1418-1. I attached installation instructions for this product for you to check out. When...
  view full answer...
• Roadmaster Base Plate Kit Installation Instructions for a 1992 Jeep Cherokee
  For a base plate kit on your 1992 Jeep Cherokee you would want a Roadmaster XL Base Plate Kit # 1418-1. I attached installation instructions for this product for you to check out that detail how this product will install onto your vehicle. To complete your flat towing setup you may be interested in purchasing the following products: When flat towing a vehicle, there are 5 main components that are needed including the base plate kit I already recommended. When choosing a tow bar, you...
  view full answer...
• Can a Front Mount Trailer Hitch be Used to Flat Tow a 1991 Jeep Cherokee
  A front mount trailer hitch like # 31084 can be used for a winch or for pushing around a trailer to get it in the right position but you can not use it to tow your 1991 Jeep Cherokee. You would not be able to turn properly with a single attachment point at the center of a 4 wheeled vehicle. To flat tow a vehicle you will need a special attachment called base plates, a tow bar, safety cables, lighting, and supplemental braking. Base plates and a front mount hitch cannot both be installed...
  view full answer...
• Base Plates, Tow Bar, and Accessories to Flat Tow a 1991 Jeep Cherokee
  I am not sure what type of base plate system you have but if you can send me pictures I may be able to determine if anything we have will fit. What I recommend is to install a completely new system so you know that it is compatible with a tow bar and you will get all new parts and will not have to worry about the condition of the system. You will also want to consult the vehicle owners manual for the proper procedure for towing the vehicle. For your 1991 jeep Cherokee you can use # 1418-1....
  view full answer...
• What Size Opening Does the XL Base Plate Kit # 1418-1 Have for a 1999 Jeep Cherokee
  I went out and measured the shank of the drawbars on the Roadmaster XL Base Plate Kit # 1418-1 for your 1999 Jeep Cherokee and found them to be 1-1/2" square. Sometimes aftermarket front bumpers for Jeeps will have a winch mount built into it and then the D-Rings can be used with adapters like part # RM-035 (3/4") or # RM-035-1 (1"). If you can find a bumper that fits your Cherokee which is rated for flat towing and utilizes the D-Rings just let me know how thick the D-Ring mounts are...
  view full answer...
• Are There Base Plate Kits Made for Flat Towing 1996 Jeep Cherokee
  We do have custom fit base plate kits that fit your 1996 Jeep Cherokee like the Roadmaster part # 1418-1 which bolts to the frame and easily attaches to a Roadmaster tow bar. I don't know what brand or model tow bar you have but if you instead have a Blue Ox you'd want the base plate kit part # BX1110 or if you have a Demco part # DM9518010. I also attached a link to a page that has a chart with adapters listed for going between common brand tow bars and base plate.
  view full answer...
• What Type of Tow Bar Needs to be Used with Roadmaster Base Plate # 1418-1
  The Roadmaster XL Base Plate kit part # 1418-1 that you referenced needs to be used with a Roadmaster tow bar that has a crossbar connection like the Stowmaster part # RM-501. If your tow bar does not have a crossbar assembly there might be an adapter available for it that would allow it to be used with a Roadmaster base plate kit but I'd have to know what you have. I attached a help article to this page that has a chart with all of the base plate kit to tow bar adapters we offer.
  view full answer...
• Parts Needed to Flat Tow 1992 Jeep Cherokee XJ
  To flat tow the vehicle, You'll need a tow bar, base plates, wiring, a supplemental braking system, safety cables and possibly a high/low adapter. For a tow bar, the Roadmaster StowMaster # RM-501 you'd looked at would work fine. For base plates, I'd recommend the Roadmaster # 1418-1 and for safety cables, use # RM-643. For the wiring, I'd recommend a diode kit like # RM-15267. For a braking system, go with the Brake Buddy Portable Braking System, part # HM39494. A portable system is easy...
  view full answer...
• Will Tow Ready Adjustable Tow Bar Fit on Front of 1991 Jeep Cherokee
  As far as modifications, you will need base plates to tow your Jeep Cherokee. We have two custom-fit options and what it boils down to is part # 1402-1 is not removable and part # 1418-1 is removable. These are made by Roadmaster and I would recommend the Roadmaster Tracker Tow Bar instead of the Tow Ready Adjustable for your application. If you go with the Tow Ready, you will need an extra adapter (part # RM-025) to use with the base plates since they are a different manufacturer, and...
  view full answer...
• Parts Needed to Flat Tow 1992 Jeep Cherokee
  The first thing you need to flat tow your 1992 Jeep Cherokee is a base plate kit that is confirmed as a fit. For that you'd want the part # 1418-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect. You'll also need the crossbar part # 910021-00....
  view full answer...
• Complete Flat Towing Setup Recommendation For A 1994 Jeep Cherokee 4x4
  For your 1994 Jeep Cherokee, to complete your flat towing setup you're going to need: -A base plate kit, the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 1418-1 with the adapter # 910021-00, -A set of tow bars, the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676, -A braking system, the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251, & -A wiring kit, the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. Attached are...
  view full answer...

Do you have a question about this Base Plate?