Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the lower interior trim panels and the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within the side storage compartment.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because your vehicle runs on a multiplex wiring system, the wiring needs to be converted to be compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.I like the connections and distribution box as well as the instructions/video. Two points I would add are that there is a ground bolt when you open up the left side panel to get at the tail light. Probably better to use that than a self tapping screw that might lose its continuity.
Next, it’s difficult to run the wire through the suspension/frame in the left rear. I zip tied it to the top of that, keeping it away from any moving parts. Lots of zip ties and making sure to trim off any loose ends. Running it through the sill is no problem but when you get to the end instead of going up into the engine bay where it’s difficult to zip tie and is close to the exhaust system, you might want to run on the inside of the felt in the wheel well. You’re already taking off two of the T 25 screws when you go forward through the sill and reach the end, so all you need to do is remove three more T 25 screws at the edge of the wheel arch and two 10 mm plastic nuts. Then you can pull the felt away from the wheel arch and run the wire up and underneath a foam block that is at the top. Up in the engine compartment, that comes out just forward of the positive lug, underneath the metal that the lug is bolted to. It might help to place the wire up underneath the foam as far as you can and then reach back from up in the engine bay to fish it forward. I think either way you do it you can get a clean install and a working connector. Just food for thought.
I received the shipment timely and the updates while in transit were excellent. However, the shipment had minimal packaging and was in bad shape when it arrived. Fortunately, there does not seem to be significant damage to the hitch and I located all of the parts for the wiring kit.
love how fast delivery was thank you. the parts here are very good
As far as vehicle installations go, this went about as smooth as possible. Even if you are only slightly mechanically inclined, you should be able to tackle this install. All of the connectors fit right up on my vehicle as expected. Nothing unexpected. The How-To video was VERY helpful and guided me the entire way. 10/10!
I purchased a trailer wiring kit for a 2013 VW Touareg. It was the easiest trailer wiring Kit that I have ever installed. etrailer.com has complete & easy to follow on line instructions. The best part is that the kit, 118668 has tail lite plug adaptors for a quick and EASY connection.
I installed this wiring harness at the same time I installed a hitch on my VW Touareg. The video provided online was a huge help and complimented the very detailed, application specific instructions provided. There was only 1 part that I thought could be more specific and that was when it came to getting the long black wire that gets routed to the engine compartment, out of the rear of the vehicle. I ended up popping out a round rubber gasket from the wheel well and routing the wire out there. The video indicates that you can feel around and find a "vent" for the wire to exit through. Either way, I was able to get everything connected, and even though it took a bit of time, it was relatively simple. I'm only "handy" not a mechanic or electrician, but after watching the video I realized that this would be pretty simple and wasn't anything that I couldn't handle.
Very easy to install with instructions and video showing how to do. Need to have some mechanical and electrical knowledge thou to complete this work.
Worked great! Easy instal and most likely saved me a bazillion dollars not going to the dealership. Great installation videos also. Thanks!
This was an easy install; especially with the helpful installation videos provided by E-trailer.
this is by far the easiest trailer light kit i have installed, i highly recommend this kit!
Nothing but quality!! All you need to complete the wiring for your trailer.
Works well, fairly simple install. Be careful to not drop the right hand tail light retaining screw, definitely adds time to the install!
The product worked as expected and the video by etrailer on youtube was extremely helpful. And, the package arrived quickly.
Order was lost during shipping etrailer Still provided great service given the circumstances. I’ll definitely purchase from them again.
Easy install, works great. The video walk through made the job even easier
Delivered quickly as promised. Installation was easy. Highly recommend.
Easy to install and continues to work after extensive use.
The wiring was exactly as advertised and fit perfectly.
Thank you so much, for fast delivery, and exactly what I ordered. Thank you!!
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ben
1/25/2024
After a year, and many trips to the dump with my little trailer, as well as some U-Haul rentals, I haven’t had any problems with the wiring.