T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
(134 reviews)
Price: $58.95
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
Retail:$100.14
Our Price: $58.95
You Save: 41%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (134)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points beneath your vehicle, on the driver's side
- Plug in connectors
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 5.6 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's factory tow package wiring harness, which is located beneath the rear driver's side of your vehicle. You will find the harness attached to a grommet between the wheel well and the bumper. Once you've plugged in the connectors, insert the included fuse into the in-line fuse holder.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118258 Tow Ready T-1 T-Connector - OE Replacement 4-Flat - Modu-Lite
Item # 118258
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2012 Hyundai Santa Fe with factory Tow Package
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector - 118258
Average Customer Rating: 4.7 out of 5 stars (134 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.by: Terry02/19/2023
It was a perfect fit for my SUV, I will always purchase my item from Etrailer. THanks
by: Anthony09/26/2019
2007 Hyundai Santa Fe
Product quality very high, delivery very fast, shipping container (cardboard box) was not strong enough to support handling/shipment, box bottom was ruptured with hitch assembly hanging out, box should be supported stronger, no parts missing, hitch was scratched up somebut, nothing that a little black paint didn't fix.
I installed the wiring harness connections and fuse box on the external side of the vehicle to eliminate having to take apart the internal sheet metal panels and providing easy access to the fuse in the event of fuse failure, this eliminates the necessity of interior Panel removal to change a fuse.
Easy installation, product has great great design features ,great customer service with prompt delivery. Just ordered the bracket (#18140) to secure the 4 prong plug to the hitch neatly and secure to eliminate the loose plug. (not shown in photos (Bracket in transit),
Anthony R.
9/27/2020
Great, works like a charm.
by: Thomas01/23/2013
2008 Hyundai Santa Fe
Excellent all the way, from the Price,customer service to the free shipping that was supper fast, I received my parts a day early. I had asked a question an I actually got a quick answer. I ordered an etrailer hitch,2X2"receiver, 2" ball and wire harness for my 2008 Santa Fe that has a tow package. The wire harness hooked right up to the provisioned connectors on my car and worked. I Installed this by myself using a motorcycle jack to lift it. I think this is really a two man install. The hitch looks and feels heavy duty along with the receiver. First time I have purchased from etrailer and I am very satisfied from the price to the customer service to the quality of the items purchased. I would recomend to anyone.
by: Wayne N.04/05/2012
2012 Hyundai Santa Fe
Quick install on my 2012 Santa Fe that had trailer prep package. All the work is done under the the car. I first removed the rubber gromet and added about 2 feet of flex tubing because all the wiring is exposed to the elements. All I had to do next just was plug in 2 connectors, route the cable and put on a couple of wire ties.
by: John03/13/2024
Shipping sucked
by: Rock06/20/2014
2012 Hyundai Santa Fe
The wiring harness works great on my 2012 Hyndai Santa Fe. Easy to install thanks to the perfect match with the factory harness and cable routing access points and clear instructions provided in the package and on the e-trailer website.
Good pre-sale support and prompt delivery. This is the second time I've purchased from e-trailer and very pleased both times.
Rock
6/24/2015
I continue to be very pleased with the products and service from etrailer.com.
by: Viz C.08/04/2015
2012 Hyundai Santa Fe
Wire harness and hitch worked out perfect, excellent install video, package arrived a day early! Great communication with etrailer!! Would definitely use them again !!
Viz C.
8/10/2016
Perfectly as advertised, working out great for us.
by: Brenton03/19/2018
Wiring harness is just fine. I made the mistake of buying this harness from a local professional shop. The installation was incorrect--I had taken with me a portable computer to show the video and to pull up copies of the directions but the professional would have none of it. The printed version of the instructions were adequate and coupled with the video was perfect. I did the install myself. I canceled the local shop and found etrailer. Even if you're a 70 year old lawyer with no experience with installing this harness, you will do better to handle this chore yourself. etrailer works. I know I should support the local places, but as time passes, I find myself doing on-line. Actually the people on-line are nicer.
by: Michael09/11/2019
Think this is even better than the previous version.
Do have a question as the power/fuse tag specific a 10 amp fuse, but it had a 15 amp fuse installed. Is this CORRECT????? Also used 3M tape to secure it as it does not now include 2 sided tape. Works Great and Super Service. Was delivered as promised immediately after the hurricane!!!
Rachael H.
9/24/2019
I have confirmed with my contacts at Tekonsha, and there was a slight design change. My contact explained that ether the 10 amp or the 15 amp fuse would work properly with the harness.
by: Bruce07/24/2015
2012 Hyundai Santa Fe
The trailer wiring installed easily and works great. Erailer ships fast and has great products.
Bruce O.
7/23/2016
It was a perfect fit and an easy install.
by: Bill H.05/27/2012
2011 Hyundai Santa Fe
Works perfectly. Like an earlier reviewer I installed the entire harness under the rear of my 2011 Santa Fe without removing any internal storage bins. This is a big time saver. After plugging-in the two connectors (your vehicle must have the activated tow package; the connectors alone may not be active) I removed the provided rubber grommet and added additional plastic flex tubing to protect the harness wires. I then securely fastened everything to the frame and hitch. I also added some heavy grease around the joints of the two connectors to keep any moisture out.
by: Kenneth Ross06/06/2012
2012 Hyundai Santa Fe
If you own a 2012 Hyundai Santa Fe Limited V-6 with tow package you do not have to wire anything inside your vehicle. Hyundai did a perfect job of placing the tow wires outside the vehicle and that is just what I wanted. The wiring harnes is long enough to do what ever you want to do with it. Take it off or put it on each time you pull your trailer. Or, just leave it attached as I did and place the little box in a plastic container to protect it from the elements. You can tuck or attach the box in many places under the vehicle. Too many places or ways to show you. Use your imagination and surprise yourself. Don't go through tearing the inside of your vehicle up to mount the unit inside. YOU DO NOT HAVE TO DO THAT with the 2012 Santa Fe. You should also place electrical grease inside the connectors to prevent moisture etc. from getting on the part. If your going to leave the wires attached all the time them wrap electrical tape over the plugs once you greased the connectors and presto your protected. How easy is that?
by: Jon F.,2008 Hyundai Santa Fe07/12/2013
2008 Hyundai Santa Fe
Product installation was exactly as described in written and video formats. Took approximately a half hour to take everything out plug wiring in and put everything back. The only drawback to product was as described by other reviewers, that the zip ties that secure the wiring to the hitch were way too short. I had some so it wasnt a problem, but the really should include zip ties that are more than 4" long. Other than that, another great product and product description from etrailer!
by: Don M.07/04/2015
2011 Hyundai Santa Fe
I received the hitch and light kit in 4-5 days from order placement. Installing the hitch was not a problem and it fit perfectly. The only recommendation is to be sure to clean the bolt holes on the car frame with lubricant and a small diameter wire brush as this will help during installation. Installing the light kit was a breeze and took less than an hour.
by: Chris C.07/18/2014
2012 Hyundai Santa Fe
The trailer and harness seemed to fit just fine. It's a bit of tight squeeze getting the hitch mounted behind the Santa Fe muffler but I managed. I used the video guide on YouTube to aid me in installing the electrical harness and that worked just great. I can't wait to test it out with a small trailer!
by: Jeffery 08/03/2023
Easy install.
by: Rick C.01/20/2013
2011 Hyundai Santa Fe
This wiring harness worked great. With the help of the video here on the website, installation was a breeze! The only issue was the tie-wraps were not quite long enough to go around the trailer hitch bar, but I had some longer ones in my toolbox, so not a big deal.
by: Allen L.04/08/2012
2012 Hyundai Santa Fe
Installed on a 2012 Santa Fe with trailer package. Factory wiring connections are underneith vehicle behind left rear fender. Is not necessary to remove any of the panels inside vehicle. Found out after removing interior panels. Would be easier to connect before installing trailer hitch. Connections are right beside driver side mounting bracket. Surge box is mounted on side of hitch mounting bracket. Hope it is water proof.
by: Jon03/06/2016
2007 Hyundai Santa Fe
Excellent service and high quality products. Installation instructions were clear and precise. My wiring harness is better than the factory original at a fraction of the price. It arrived quickly and had all the hardware necessary for installation. Very happy i used etrailer.
by: AWD07/30/2012
2012 Hyundai Santa Fe
Easy installation on a Hyundai Santa Fe 2012 with the tow package. All you have to do is pull the caps off the already installed connectors under the left rear fender, plug in the harness and route the wires.
The module looks sealed so I have no problem with just attaching it to the hitch.
Only reason for not "excellent" is the zip ties included are way too small. You'll have to buy your own larger zip ties to attach the wires to the hitch.
by: JSharky08/19/2015
Did not know that the interior panel had to be removed to install harness. It was not to hard to do, but the average owner would have to go to a shop to have it installed. Overall I'm very happy to recommend this product and etrailer parts and acc. to all that are looking for these items. Thank You for having such a WONDERFUL STAFF that helped me with my purchase. All the Best to you and them, JSharky
by: George M.07/13/2011
We received the wiring harness sooner than we expected and that was a pleasant surprise. The installation too less than 20 minutes from start to finish and was very easy. We are looking forward to using our new hitch and wiring harness to tow our boat. Thanks etrailer for the great service and for providing such great products.
by: Randy M. - Waco06/30/2016
Hyundai Santa Fe
Functions advertised. POOR design (for Hyundai Santa Fe) puts fuse and connections behind interior body panel. Significant disassembly required if fuse blows. Previous model much easier to install and fuse & connectors could be serviced without disassembly if required. Installation video is fairly accurate, but does not make apparent potential for damage to body panel clips. Product pricing is consistent with similar products in market. No issues with shipping. Overall, have had good luck with etrailer and would use them again in the future.
by: Henry08/04/2017
2011 Hyundai Santa Fe
Part looked a little different than the web site but was obviously the same part just a manufactures change. Directions where very easy to follow and everything went exactly as described. Only wish I had ordered a 4-wire flat mounting bracket at the same time
25
134
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Trailer Wiring Harness and Receiver Hitch for a 2007 Hyundai Santa Fe with Factory Tow PackageFor a 2007 Santa Fe with the tow package, you would need part # 63845. For a hitch, I would recommend the Hidden Hitch Class III Receiver, part # 75471. You might also need the following: Ball mount, part # C45010 1-7/8 Inch Trailer Ball, part # 19260 2 Inch Trailer Ball, part # 19247 To see install details for the hitch and the wiring, as well as a video showing the hitch being installed, click on the provided links.
view full answer... - Will the Draw-Tite T-One Wiring Harness # 118258 Fit on a 2009 Hyundai Santa Fe LimitedYou may be able to use a wiring harness like the Draw-Tite T-One Wiring Harness, # 118258, on your 2009 Hyundai Santa Fe, however, you will first want to determine if your vehicle was equipped with a tow package. If your Santa Fe was not equipped with a tow package, then the connectors under your vehicle may not be hot. There are a few ways you can go about checking this, first, you could use a circuit tester like the Quickee Tester, # 3808, to test the connectors on your vehicle. If...
view full answer... - Can the Trailer Wiring Converter be Mounted Under a 2012 Hyundai Santa Fe Inside of a TubeIf you wanted to mount the converter box in this manner there are a couple of things you need to be aware of. First, depending on where you can mount the tube, the wires may not reach so be mindful of that. Second, having it sealed will make troubleshooting any problems difficult. Other than these issues it should not be a problem.
view full answer... - Recommended Wiring to Install Tekonsha Prodigy P3 Brake Controller on a 2010 Hyundai Santa FeTo install the Tekonsha Prodigy P3 Brake Controller # 90195 on your 2010 Hyundai Santa Fe, you will need to do some cutting and splicing. This is not a difficult process when you have a 4-way trailer connector and use the Universal Brake Controller Wiring Kit # ETBC7. This kit gives you everything you need to make a trailer connection for a trailer with brakes. It includes all the wiring, circuit breakers, and connectors for installation. This will allow your brake controller to communicate...
view full answer... - Adding a 7-Way Trailer Connector to a 2009 Hyundai Santa Fe with 4-WayTrailer ConnectorIn order to add a 7-Way trailer connector to your 2009 Hyundai Santa Fe on which you have already installed a 4-Way (118258) you have a couple of options. First, if you just want the basic lighting functions and nothing else then you would just need an adapter like # 37185. The 4-Way end will plug into this adapter, then you will ground the white wire to the frame and tape up and stow the other wires out of the way. If there are functions on the trailer like electric brakes and 12 volt...
view full answer... - Testing the T-One Wiring Harness # 118258 on a 2009 Hyundai Santa Fe LimitedUsing a test light to test your T-One Wiring Harness, # 118258, on your 2009 Hyundai Santa Fe Limited is a fairly simply process. To test the trailer connector, you will need a circuit tester with an incandescent bulb like # PTW2993. These testers can also be found at many hardware or auto parts stores. I have attached a video of my coworker demonstrating how to test a 4-way trailer connector using a circuit tester for you to check out. When a vehicle comes with a tow package, it typically...
view full answer... - Can the Tow Ready Wiring Harness part # 118258 be Installed on Outside of a 2007 Hyundai Santa FeWe have heard from several customers who have done exactly what you are considering and just installed the Tow Ready Wiring Harness part # 118258 on the outside of the vehicle so as to avoid removing interior pieces. It's not the recommended installation method that Tow Ready suggests but it should work fine. I would strongly recommend the use of dialectic grease for all of the connections to prevent corrosion. For that you would want part # LT37534.
view full answer... - Is Trimming Required to Install Curt Trailer Hitch on 2012 Hyundai Santa Fe Limited w/Dual ExhaustOn a 2012 Hyundai Santa Fe, when installing Curt trailer hitch # C13073, you will need to trim the heat shield under the vehicle. Technically, you could just fold the area of the shield that would interfere out of the way but this might make installation more difficult. The bumper does not have to be trimmed and you cannot see the heat shield unless under the vehicle. I have linked a video showing an installation of the hitch and it also shows trimming the heat shield. If your father plans...
view full answer... - Comparison of Trailer Wiring Harnesses # 118415 and # 118258 for a 2009 Hyundai Santa FeMy preference between the two wiring harnesses for the 2009 Hyundai Santa Fe would definitely be to go with the Tow Ready # 118258, if the vehicle has a factory towing package. The other wiring harness, part # 118415, is for models that do not have the tow package. The Tow Ready wiring harness keeps as much of the harness and connections inside the vehicle as possible, keeping the 4-Way trailer connector and wiring safe and dry when not in use. You can view the installation instructions...
view full answer... - Where Do Yellow and Black Wires of 7-Way and Brake Controller Install GoThe white wire wire needs to be grounded so you can run the ring terminal of the adapter to the frame of your vehicle with a self tapping screw. The yellow wire is an accessory circuit that some will use as a reverse light circuit. If not needed you don't have to use it and you can tape it up out of the way. The 20 amp breaker should be used for the power wire for the brake controller and the 40 amp for the 12 volt accessory circuit of the 7-way. So 20 amp for the black wire of the brake...
view full answer...
- Are Lights Required on Pro Series # 63153 Cargo Carrier Installed on 2012 Hyundai Santa FeLighting requirements can vary widely from state to state, but generally speaking, if the cargo carrier or the cargo stored on it obscures your taillights, it's a good idea to install a light kit. You can contact your Sate Highway Patrol or Police for specifics. I really like the # 59516 LED light kit. The LED lamps are very bright, yet they draw only a fraction of the power that incandescent lamps do. I also really like the rugged wiring pigtails used by the light kit. The light kit...
view full answer... - How to Determine if a 2009 Hyundai Santa Fe has a Tow PackageFrom the research I did the easiest way to determine if you have a tow package would be to check to see if your 2009 Hyundai Santa Fe has a transmission cooler mounted in front of the radiator. A transmission cooler looks basically like a miniature radiator that will be mounted in front of the radiator. If your vehicle has a transmission cooler then you know it has a tow package. You can also look under the driver side wheel well to see if the connections are there. Check out the video...
view full answer... - Trailer Hitch, Wiring, Ball Mount, Hitch Ball and Bracket Recommendation for a 2012 Hyundai Santa FeMy recommendation for trailer wiring for your 2012 Hyundai Santa Fe with factory trailer wiring package would be the Replacement OEM Tow Package Wiring Harness, # 118258. Keep in mind that this harness is a replacement harness and, if your vehicle did not have the factory connector installed when it was new, you will need to access the tow package connectors and check them with a circuit tester, like part # PTW2993, to be sure that the wiring is complete on your vehicle. If you find that...
view full answer...
- Parts Need to Add a Trailer Brake Controller to a 2012 Hyundai Santa FeIn order to install a brake controller on a 2012 Hyundai Santa Fe you will need to hardwire it in. There are 3 things you will need: a 4-Way wiring harness, a # ETBC7, and a brake controller. If the Santa Fe does not already have a 4-Way you will need to add one using # 118415. If it does have a 4-Way you can skip to the next step. I have linked instructions and a video showing a typical installation for you. (If the vehicle came with the factory tow package then you would use 4-Way #...
view full answer... - Recommended Parts to Tow a Trailer with a 2012 Hyundai Santa FeThanks for reaching out! I recommend installing the etrailer Trailer Hitch Receiver # e75AR on your 2012 Hyundai Santa Fe because it's a Class III trailer hitch with a matte black finish that blends in better and is more durable than the glossy black finish we see on the other hitches. To complete your towing setup I recommend using Tekonsha T-One wiring, part # 118258 if you have the factory tow package or part # 118415 if you don't have the factory tow package, as well as a ball mount...
view full answer... - Trailer Hitch & Wiring Harness For 2011 Hyundai Santa Fe Limited to Tow Boat TrailerThe best I can give you is a maybe because you didn't say how much the bass boat and trailer weigh, or if you have the tow package or not. So if your 2011 Hyundai Santa Fe does not have the tow package it has a 2,000 lb towing capacity; with the tow package it has a 2,800 lb tow capacity. So if your bass boat and trailer weight that or less, you can tow it. For that you will need the following: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75684 And - WITHOUT Tow Package: T-One Vehicle...
view full answer... - Will a Draw-Tite Trailer Hitch Fit a 2008 Hyundai Santa Fe with Optional Third Row SeatingThe Draw-Tite Trailer Hitch, # 75471, is listed as a fit for all models of the 2007 to 2009 Hyundai Santa Fe. I have included a link to the installation instructions for you and a link to a video showing a typical installation. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring there are 2 options. If the vehicle does NOT have a factory tow package, use...
view full answer... - Fit of CURT Class III Receiver Hitch Part # C13073 on 2012 Hyundai Santa Fe with Dual ExhaustAccording to our friends in Tech Services at CURT Manufacturing, the Class III receiver, part # C13073 will indeed fit a 2012 Santa Fe with dual exhaust. You might also need the following: Wiring Harness with 4-pole Trailer Connector, part # 118415, or # 118258 if your Santa Fe is equipped with the tow package. Ball Mount, part # D-4 Hitch Pin and Clip, # PC3 1-7/8 Inch Trailer Ball, part # 19260 2 Inch Trailer Ball, part # 19247 2-5/15 Inch Trailer Ball, part # 63847 To see the install...
view full answer... - Trailer Wiring Harness Options for a 2011 Hyundai Santa FeThe Replacement OEM Tow Package Wiring Harness, # 118258, is designed as a replacement for a factory wiring harness and/or for those 2011 Hyundai Santa Fe models that have a towing package. If your Hyundai Santa Fe does not fall into this category then you need # 118415. If this does describe your Santa Fe, then you are correct, the connectors and converter are designed to remain in side the vehicle. The point at which the connectors are pushed through from the outside to the inside of...
view full answer... - Recommended Trailer Hitch and Wiring for a 2010 Hyundai Santa FeI recommend going with the Draw-Tite Trailer Hitch # 75684 which is a Class III hitch with a 2" receiver. This trailer hitch will fit your 2010 Hyundai Santa Fe as long as you don't have the dual exhaust and it doesn't requiring cutting of your rear fascia like the Curt trailer hitch does. Then for wiring I recommend the Tekonsha T-One as we have found the Tekonsha wiring products to be the most reliable. If you have the factory tow package use part # 118258 otherwise you need part #...
view full answer...
- Curt Hitch C13073 versus Draw-Tite 75684 for 2011 Hyundai Santa FeCurt offers a round tube Class III receiver, part # C13073, but to satisfy their warranty requirements, a stabilizer strap # 18050 needs to be used for non-trailer loads like a bike rack or cargo carrier. If you intend on only using the receiver for towing, the Curt would be a good choice. The Draw-Tite # 75684 is constructed of square-tube steel. Because of the spoiler on top of the hatch, the stabilizer strap will not work well on the Santa Fe, so for a bike rack or cargo carrier, the...
view full answer... - Will Installing Draw-Tite # 75684 on 2010 Hyundai Santa Fe Prevent Lowering of Spare TireAs you can see in the provided photo, installing the Draw-Tite Class III receiver on your 2010 Hyundai Santa Fe will somewhat obstruct the spare tire. You will still be able to deploy the spare tire if while lowering it, you push the edge of the tire toward the front of the vehicle until it clears the hitch. The hitch on my wifes van is obstructed in exactly the same manner, and I can tell you from experience that getting the spare lowered is no big deal. If you were planning on using...
view full answer...
- Correct Trailer Wiring Harness for a 2011 or 2012 Hyundai Santa Fe with Towing PackageAt this time the correct choice for the 2012 Hyundia Santa Fe SE with towing package is the Draw-Tite custom fit wiring, # 118258. Draw-Tite has tested this harness on the 2011-2012 models and verified that it will work without issue. I have attached a link to the installation instructions for you to review also. You should verify, with a circuit tester, # PTW2993, that the connectors on your Santa Fe are fully functional before purchasing the tow package wiring harness. If one or more...
view full answer... - How to Tell if a 2007 Hyundai Santa Fe Already has Trailer WiringCheck the rear of your 2007 Hyundai Santa Fe and see if there is already a 4-Way installed at the rear or if it is possibly sitting on the inside of your hatch area possibly under one of the panels. If you cannot find the 4-Way then you don't already have one installed. If you don't already have a 4-Way then odds are that you don't have the tow package and you would need the T-One # 118415. The T-One # 118258 is for if your Santa Fe came with the tow package and you are replacing your...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Video Edited:
Zack K
Video Edited:
Mike H
Video by:
Joshua S
Test Fit:
Nicholas E
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Terry
2/20/2024
Great