Recommended Trailer Hitch and Wiring for a 2010 Hyundai Santa Fe
Question:
Can you recommend a hitch and harness set up for a 2010 santa fe? Thank you.
asked by: Rick
Expert Reply:
I recommend going with the Draw-Tite Trailer Hitch # 75684 which is a Class III hitch with a 2" receiver. This trailer hitch will fit your 2010 Hyundai Santa Fe as long as you don't have the dual exhaust and it doesn't requiring cutting of your rear fascia like the Curt trailer hitch does.
Then for wiring I recommend the Tekonsha T-One as we have found the Tekonsha wiring products to be the most reliable. If you have the factory tow package use part # 118258 otherwise you need part # 118415. To mount the 4-Way Flat connector to your trailer hitch you can use brackets # 18144 and # 18140 which keep you from having to drill or cut.
I would imagine that you will be using this for towing. If that is the case then you also need a ball mount, hitch pin, and pin & clip. I recommend checking out the etrailer.com Ball Mount Kit # 989900 which comes with both a 1-7/8" and 2" hitch ball as well as 2 ball mounts which have a 3/4" rise/2" drop and 2-3/4" rise/4" drop. Be sure to referenced the linked ball mount article to ensure that this kit is correct for your towing application.
I have also attached some installation videos and written instructions for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
No-Drill Mount for Electrical Mounting Bracket - Short
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- 4 Round
- 5 Round
- Tow Ready
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Video: Trailer Wiring Harness Installation - 2011 Hyundai Santa Fe
- Video: Trailer Wiring Harness Installation - 2012 Hyundai Santa Fe
- Q&A: Picking Out Trailer Wiring and Brake Controller for 2012 Hyundai Santa Fe
- Shop: Trailer Hitch
- Search Results: hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Trailer Wiring Diagrams
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Video: Choosing the Right Brake Controller
- Shop: Gooseneck Hitch
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: brake controller
- Article: My Trailer Hitch Doesn't Fit
- Shop: Fifth Wheel Hitch
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt 4-Pole Flat Trailer Connector Mounting Bracket Review
- Search Results: 90160
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Search Results: trailer brake controller