Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Dodge
Part Numbers: RED44FR,3020-S
Retail:$299.99
Our Price: $268.95
You Save: $31.04
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
part number: RED44FR
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- User-controlled mode gives you direct control of your braking
- Great for off-roading or towing in adverse weather
- Activates trailer brakes independent of tow vehicle's brakes
- Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller
- Lets you adjust braking power with the turn of a dial
- Gives you a manual override at your fingertips
- Offers simple diagnostics with colored LED alerts
- Main unit mounts out of sight behind the dash in any position, direction, and angle
- No more banging your knee on a bulky controller
- No interference with airbags or other vehicle accessories
- Universal wiring harness (included) or vehicle-specific adapter (sold separately) required for installation
- Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety
- Made in Australia
Specs:
- Application: trailers with up to 3 axles (6 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Works with 12-volt and 24-volt vehicle electrical systems
- Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall
- Control knob dimensions: 1-7/8" long (including knob) x 9/16" wide x 3/4" tall
- Length without knob: 1-1/4"
- Output voltage range: 9V - 32V
- Output current rating: 25 amps continuous
- Maximum charging voltage: 12V DC
- 2-Year warranty
Tow-Pro Elite Operation
The dash-mounted knob puts control of your trailer's brakes at your fingertips. In addition to offering fast, simple power adjustment and an easily accessible manual override, it has colored LED signals that let you know what the brake controller is doing at a glance.
When you are calibrating the brake controller for the first time, the LED lights will signal your progress. To finish setting up the device, you will need to drive your vehicle in a low-traffic area and brake 20 times or so to let the unit learn its orientation and the direction of travel. If your trailer is connected, the LED light will flash green/blue as it processes the information. If there is no trailer connected, the unit will still calibrate, just without the knob lighting up. The knob will stay blue longer as the calibration process gets closer to being done. When the display turns solid blue, initial calibration is complete. The unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.
Once the brake controller is activated, you can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the knob clockwise toward 10. To decrease the power output, rotate it counterclockwise toward 0.
When you apply the tow vehicle's brakes, the knob will change from blue to red to signal that the trailer brakes are being activated. The higher the braking power output, the deeper the red that you will see.
The Tow-Pro Elite keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just press the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
User-Controlled Mode
The Redarc Tow-Pro Elite comes with a unique feature that lets you respond to any terrain or weather you meet while on the road. The user-controlled mode gives you direct control over your trailer's braking so you can have exactly the level of power output you need for any situation - perfect for off-roading or adverse weather conditions. In this mode, the Tow-Pro Elite will apply your trailer's brakes with the same preset amount of power each time you activate the brakes in your vehicle. Set the power low if you're towing through sand or mud so that the trailer doesn't stop with too much force and act as an anchor. When on a steep descent, set the power to a higher level to ensure that the trailer's momentum doesn't cause it to push against the tow vehicle.
To turn on the user-controlled braking mode, rotate the knob counterclockwise and apply your vehicle's brakes. Push down on the remote knob twice (2 times within 1 second) and release the brakes. The knob will turn green to let you know that the mode has been activated.
Simple, Out-of-the-Way Installation
Unlike most proportional controllers on the market, the Tow-Pro Elite has almost no mounting restrictions. It comes in 2 pieces - the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or having something in your cab that can interfere with your vehicle's lower airbags.
The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. A universal mounting panel is included to ensure a clean, from-the-factory look. Custom-fit panels are available for certain vehicles as well. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. Your only restriction is the 3' plug-in cable that has to be able to reach between both the main unit and the control knob. Securely mount the box using screws, double-sided tape, or zip-ties (not included). A mounting kit (RE67FR - sold separately) is also available for the Tow-Pro Elite. Do not zip-tie the box to wiring or cables that can shift as you drive.
A vehicle-specific wiring harness is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end will either plug directly into the controller or will splice into the included wiring harness - no need to hardwire to your vehicle. If a custom brake control wiring adapter is not available for your vehicle, you will need a universal wiring harness (RED69FR - sold separately). A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may also be required for installation.
For assistance in properly wiring the Tow-Pro Elite, please refer to the diagrams below:
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Proportional Braking
The Redarc Tow-Pro Elite brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Tow-Pro Elite uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
EBRH-ACCV3 Redarc Tow-Pro Elite Trailer Brake Controller - Dash Mounted Knob - Hidden - Proportional Brake Controller
Replaces Redarc 331-EBRH-ACCV2
Item # RED44FR
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Dodge
part number: 3020-S
Streamline the installation of your trailer brake controller with this custom adapter. Simply connect the wires of the harness to your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
Features:
- Pigtail wiring adapter eases installation of your electric trailer brake controller
- Connector end plugs into the built-in port beneath the dash of your vehicle
- Wire end connects to the wires on your brake controller with the included butt connectors
- Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
To install your electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To hook this adapter up to your trailer brake controller, just connect the 4 wires of the harness - ground, power, brake switch, and brake power - to the corresponding wires on the brake controller. If your brake controller came with a plug built into its wiring harness, you will have to cut off the plug and connect to the wires themselves.
3020-S Tekonsha Brake Control Pigtail Wiring Adapter - Single Plug - Dodge
Replaces Tow Ready 20261
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional - RED44FR
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Dodge - 3020-S
Average Customer Rating: 4.8 out of 5 stars (1550 Customer Reviews)
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain. Streamline the installation of your trailer brake controller with this custom adapter. Simply connect the wires of the harness to your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.by: Mark06/20/2022
2002 Chevrolet Silverado
I saw the great online reviews of this controller and took the plunge. I bought my 2002 Chevy Silverado K1500 extended cab short bed truck new in 2001. It came with the HD Towing package which include a factory plug in trailer brake wiring loom. I took my time over a 2 day period to carefully install and triple check my install. The Chevy and Redarc wiring wiring descriptions made it easy to join the two harnesses. I used HD crimped plug in connectors further protected with shrank tubing. All wiring was bundled with zip ties after encasing in HD harness protective cover. Zip ties held in place behind the removable panel beneath the steering wheel. The control button is installed on the right side of the steering column within easy reach. Nice install. I read that the light would not go on until a trailer was hooking up. I was elated when we picked up our new cargo trailer and the controller knob light lit up upon hitching up. the first mile of travel allowed easy testing of the system and fine tuning came a few miles further down the road. GREAT PRODUCT!
by: Happy Camper Solution for Ford Ranger owner Gary04/07/2022
2020 Ford Ranger
It truly amazes me that Ford touts the towing capacity of my Ranger, yet not one dealership I called could offer a solution for a trailer brake controller to be able to pull my little camper. I finally turned to etrailer since they had helped me meet my towing needs in the past with a different vehicle. etrailer's Redarc Tow-Pro Elite Trailer Brake Controller was a perfect solution! They also supplied a terrific video explaining in great detail how to install it in my truck. I preferred the in-dash location using one of the extra twelve volt ports using the optional round adapter insert and found it to be very convenient after a summer of towing. Highly recommend both Redarc Tow-Pro Elite and etrailer!
by: Ron04/15/2022
Love the self-calibration and hidden controller. Great space saver and works as described. I did find the knob location in your video not very good; I could not see it through the steering wheel when driving. As you can see from the picture it is now visible from the driver's seat and easy to adjust when needed. Also, in this location the only hole I had to drill was 3/16" behind the knob and not visible or damaging. I was able to use the knob bracket that came in the kit and just push it into place, very stable.
by: Hardwick01/08/2023
2000 Chevrolet Silverado
So far it is anazing! I installed it splicing with the gm wiring harness, and put the box under my console, with the knob in one of the accessory port holes using the knob adapter. The controller calibrated quickly, and works great once you get the gain set correctly. The ONLY thing I don't care for is that the unit stays powered up, so the led stay lit while a trailer is hooked up. I guess it doesn't drain battery much, but I don't care for anything draining my battery, no matter how small.
by: James08/28/2022
Easy to install and works great. Love the stealth mounting. I get compliments on just the one knob being visible.
by: David02/04/2024
I installed this on my 2009 Dodge RAM 1500. It replaced the other one I had. This was a challenge to install because of where I had to mount it under the dash. But it was also wired a little different. The former controller had the positive (red) and negative (black) wires reversed from this Redarc controller. When I installed the Redarc the way the other controller was wired the brake lights wouldn't work. Once I got them put right for the Redarc it is working right.
by: Jose 05/07/2024
Chevrolet Silverado
Great quality trailer brake controller, seats very nice, flush in the not use ash tray of my silverado. Lot of configuration options, ensure to read the instructions and watch the installation video, be advised it has no power until you plug a trailer, this had me going for a while :-). Thanks etrailer.
by: John03/10/2024
I have not used it yet. But i did want to know if i could use it on a small open motorcycle trailer. If i have it on for the lights, will it still effect the braking if i turn the dial to "0" on the dash? Thank you! But I can tell you, very easy to install.
by: Rodney Robinson Jr04/22/2023
Super easy install, save even more time with the plug and play harness. Lean install- only thing you see is the adjustment know- no bulky box in the way.
by: John 04/17/2024
2019 Ford Ranger
Works very well and easy to install. I put it in my 2019 Ford Ranger and it works very well. I rarely tow so didn't need the model with more involved installation. I just shut off vehicle auto braking and cruise following which I don't ever use anyway.
Factory wiring harness is right up under the dash and this plugged right in easily.
by: Vincent04/19/2024
Nissan Pathfinder
The install was straight forward. Being my second time I was able to install the controller easily and without much complication. I have both a Nissa Pathfinder and Armada, which made the installation easier since both models are similar. The product responds well, still trying to dial in the perfect breaking level.
by: Barry11/10/2022
Superb controller and outstanding service from both etrailer and Redarc. I had some questions concerning the controller interfering with the advanced braking/collision avoidance in my Tacoma, as I had read about. I emailed Redarc in Australia and they promptly answered and even scheduled a phone call! I had a good conversation with them and it turns that that issue does not apply to my vehicle. So I give Redarc 5 stars at least for service. The controller itself is easy to install after watching the video. I would definitely buy the vehicle specific wiring to avoiding splicing. The bracket also made it very easy. I just used it on a long drive pulling a travel trailer. Works great. Some trial and error is all that’s needed to adjust the amount of braking.
I installed it in the center console so it would be easy to reach in case of sway. It also looks like it came from the Toyota factory this way. No ugly box hanging below to hit your knee.
Overall absolutely great device.
I highly recommend both the Redarc Elite and etrailer.
by: Denise03/29/2021
The Redark trailer brake controller installed easily. In my 2020 Toyota 4Runner. It looks like it came installed from the factory. It’s small and easy to reach when driving. It came with a plastic install panel. This is designed for installing in a hole that you drill in your dash. It will not fit in a knock out space in your dash. There is one that fits the dash perfectly that you can buy from etrailer.
etrailer automatically bundled the Redark trailer brake controller with the correct plug and play wiring harness for my vehicle. It was nice not to have to search for the wire harness. Everything installed perfectly.
I haven’t tested the function of the brake controller yet. I’ll hook up to a trailer this week.
The items arrived in less than a week and the package was in good condition. The order tracking worked great. The tech videos on the etrailer website were really helpful. I’ll purchase from hem again.
by: Nina M02/13/2023
2009 Ford Ranger
Received this order sooner than expected and in rural area! All the parts are in the box which will be installed in a 2020 Ford Ranger for braking a 2009 Casita which is especially important in a hilly area. Have not gotten it installed yet but I plan too! Thank you etrailer.com!
by: Gene G03/20/2024
Easy installation and good instructions. I am extremely pleased with this product. It works very well and have had no issues. I am pulling a hard side camper and close to max weight for my truck and this brake controller is spot on. I like the ease of changing the setting on steep hills as needed. A little hard to pick up on the color change in the daylight when braking but a minor shift of vision corrects this issue. I definitely would recommend this controller to anyone else . The salesman was most helpful in getting me set up. If a grade of 10 is the best then I give the company, salesman and this product a 10. Thank you Gene
by: Eric05/11/2024
1994 Chevrolet C/K Series Pickup
This is the third Redarc elite I've installed, the oldest being 4 years ago. They're all flawless, easy to use, more available and less intrusive than anything else. I can pull my single-axle motorcycle trailer empty and not be overpowered, or my 2 axle dump trailer without being underpowered. Spectacular in all regards.
by: ToughMudder02/07/2023
2008 GMC Sierra
Install was a breeze, nice and clean,love the ease of the controller and the many settings if you want them if not set it and forget it perfect for the truck that is not run everyday uses power only when attached to trailer no extra draw on battery. Would definitely buy again great product!
by: Lance05/19/2021
2017 Nissan Titan
I’m going to be up front and say I have not tested this beside driving around town. The install was very quick, maybe 20 minutes in all initially in my 2017 Nissan Titan SV. I do have some concerns though. After install I had no lights to show calibration was going on. From reading the user manual I guess that can happen. First time hooking up the trailer everything seemed fine and the light was blue as it should. Once I turned my running lights on though it began to blink red showing a fault with the cable. I tested everything to make sure it was getting voltage and the wires were correct. After about an hour I found something between my backup camera on the travel trailer and the brake was causing some sort of issue. I removed the camera, unplugged all the cables from the tow pro elite and hooked it back up. Once plugged back in it showed green and blue lights showing it was calibrating. I drove the trailer around town and our relief route. After about half an hour the light turned solid blue. The control is easy to use and looks very nice. I’m unable to get it to switch to user control mode but the proportional and manual brakes works fine. I will update my review after we take it out on a few trips. As of now it seems like a great product, very clean looking and should do a great job.
by: 22 Ascent11/06/2022
I liked having the ability to place the controller in an easy to view and use location. The unit works as well as any other controller by other companies that I have used but we’re always hard to see to adjust and bang your knees while getting in or driving. Works well in my Subaru Ascent and when the time comes the old ones in the trucks will be replaced with one of these.
by: Sharon02/12/2024
Although this product cost me $250 plus another $750 to install which including having to buy an additional part (because not everything that you need comes with it), I'm extremely pleased with it. Proportional braking is the only way to go. In addition, do not buy wireless brake controllers. Why? Something happens with your phone and then what? You have no brakes! In addition, you don't have to play around with the dial. Redarc Tow-Pro automatically calibrates the brake pressure. Both my suv and trailer stop in unison, so much so I don't even feel the trailer as a separate unit. Redarc remembers, so you are not recalibrating every time you hitch up your camper. Highly Recommend.
by: Darrell 03/28/2024
Best brake controller, I have installed. Requires a little extra time to get it installed. But worth it for the convenience for handy use location. Works great and looks great.
by: KarlS07/06/2022
The Redarc Tow-Pro brake controller has worked flawlessly since I installed it a year ago. I tow a fairly light (2000 pound) pop-up trailer, which can be an adjustment challenge when braking on loose surfaces. I've found it very easy to slightly reduce the setting while on gravel and then return to the correct setting when returning to normal roads.
I purchased the Redarc because I could never get my previous controller to brake smoothly - it would often jerk at low speeds. I think that controller had problems because it was inserted into the 7-pin connector that was held by a metal bracket under my bumper that I suspect vibrated when braking, which confused that controller. Once I switched to the Redarc, which is firmly mounted under the dash, I had no more problems like that.
Finding a location in my Honda Pilot to mount the control module was a challenge - but well worth the effort. I mounted it to a plastic panel that I installed over an unused cavity in the console underneath the radio (see picture). The knob is easy to reach, and is out of the way of my knees.
Mounting the main control box under the dash was made easier because I didn't have to worry about its precise orientation since it will calibrate itself wherever it sits.
by: Mike W.10/01/2022
Installed the Redarc Tow-Pro elite in a 2022 E350 Thor motorhome. Install was straight forward. Mounted behind the brake pedal with an extended aluminum plate. etrailer was incorrect when I was told Redarc does not make a cable for this model. The available correct cable / plug for this model is the TPH-007 which is the same Ford plug that is on 3036-P. I did splice in the cable that came with the kit in order to reach the desired location.
The controller fit well to the right of the steering wheel. Had to drill thru one of the panel clips which really wasn’t needed.
by: Tim @ Man_Dog_Overland09/23/2022
2017 Jeep Wrangler
This Redarc Break Controller is a must for off-roading with a Off Grid Trailer. The ability to control the trailer separately and allowing you to hold your tow vehicle while descending hills is worth the investment.
by: Todd08/27/2022
Item works as advertized. Install was a breeze. Wow, trailer brake controllers are so much nicer than they used to be. No more big box at your knees. Just a tiny, inobtrusive knob. Very discreet. Thank you, Gwen, etrailer.com, and RedArc.
25
1543
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Comparing Curt Spectrum and Redarc Tow-Pro Brake Controller for 2018 Toyota Tundra
- Both the Redarc Tow-Pro Elite # RED44FR and the Curt Spectrum # C51170 Trailer Brake Controller offer a sleek OEM design that gets away from the traditional knee knocker mounted options that take up a lot of space in the cab. Between these two brake controllers though I do recommend going with the Redarc # RED44FR for a couple of reasons.
The first reason is an aesthetic one. One of the main benefits of both controllers is the subtle design that tries to blend in with the interior of
view full answer... - How To Install Redarc Tow-Pro Elite Trailer Brake Controller On 2008 Subaru Forester with 4-Way
- In order to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR which is an excellent option on a 2008 Subaru Forester with 4-way trailer connector you'd need to convert this to a 7-way. For this, I recommend the Universal Installation Kit for Trailer Brake Controller part # ETBC7 which comes with all of the other required parts you will need to install a brake controller.
In regards to installation; plug the 4-ways in, ground the white wire, run the black wire to
view full answer... - Are RedArc Tow Pro Elite and Mounting Panel For Control Knob Sold as a Package
- If you go through our fit guide and select the brake controllers for your 2021 Toyota Tacoma, you can purchase the RedArc Tow Pro Elite # RED44FR and the plug and play harness # RED99FR together just by going to that page and adding the parts to your cart. However, the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-007 is only sold separately at this time, so you would also need to go to that page and add it to your cart.
view full answer... - Complete Brake Controller And 7 Way Setup For 2017 Nissan Frontier
- Yes we do carry the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. Use Plug-and-Play Wiring Harness # RED39FR to install the brake controller on your 2017 Nissan Frontier. This is a simple plug-in installation process, just find the factory-wired connection under the dash and plug the harness into it. The other end of the harness plugs into the controller.
If you already have the 7 way trailer connector at the back of your vehicle, then you are all set. If you do not, then
view full answer... - Recommended Brake Controller and 4-Way/7-Way Connector for 2018 Toyota 4Runner w/Tow Package
- The brake controller that I recommend for your 2018 Toyota 4Runner with the Tow Package is the Redarc Tow-Pro Elite # RED44FR because of how easy it is to use, the versatility in mounting locations, and the wide variety of towing applications it can accommodate. To connect this to your 4Runner you just need the adapters # 3040-P and # 331-TPH-017.
The control box for the Tow-Pro Elite is able to sense the motion of the vehicle in any orientation and then the extra slack in the wiring
view full answer... - Recommended Wiring for Tow Package Activation on 2018 Toyota Tacoma
- For your 2018 Toyota Tacoma, the best way to get your tow package wiring if you have the facoty 7-way is to use the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR along with wiring adapter # 3031-S. This may require adding fuses to activate your tow package. I have looked at the owners manual online and they don't offer the location information, so you will need to check your manual that came with your truck.
I've attached the instructions to assist and recommend the Tekonsha
view full answer... - Best Brake Controller Recommendation for 2018 Cadillac Escalade
- The brake controller I recommend for your 2018 Cadillac Escalade is the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR because this brake controller senses the amount of braking you are applying on your vehicle and applies a proportional amount on the trailer brakes. It also has a very small knob that gets mounted basically anywhere you want on your dash or console. I attached a picture of what it will look like installed.
To install it all you need is the custom fit install
view full answer... - Which Version of Redarc Tow Pro Elite Does etrailer Carry
- We have the second version of the Redarc Tow Pro Elite # RED44FR as the third version is only for Australian market.
view full answer... - Which Wiring Adapter Is Needed to Install Redarc Tow-Pro Elite In 2022 Toyota Tacoma?
- To install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR in your 2022 Toyota Tacoma you will need the Plug-in Wiring Adapter # RED99FR.
This will plug in to the factory trailer brake controller port underneath the dash of your truck and plug into the Tow-Pro Elite.
I also recommend getting the mounting panel # 331-TPSI-002 as it is confirmed to fit the blank switch locations on your dash so you can install the control knob without needing to drill any holes in your truck.
I
view full answer... - Parts Needed to Install Redarc Tow Pro Elite in 2020 Subaru Ascent
- All you need to install the Redarc Tow Pro Elite # RED44FR is the install harness that was custom designed to match the OEM brake controller of your 2020 Subaru Ascent, part # 3062-P. This plugs into the port under your dash for an easy install.
view full answer... - Parts Needed for Redarc Elite Brake Controller & 2020 Jeep Gladiator
- For best plug and play wiring set-up for your 2020 Jeep Gladiator, you will want Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P. This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Use of this along with the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness, #
view full answer... - Parts Needed to Install Brake Controller in 2020 Mercedes Benz GLS
- If your 2020 Mercedes Benz GLS has the factory 7-way you can easily install the Redarc Tow Pro Elite part # RED44FR with just the install harness part # 3066-P. If you do not have a 7-way you'd have to install a 4-way like part # 119250KIT with the 7-way adapter # ETBC7 so that you could install a wireless brake controller like the Curt Echo Mobile # C51180.
To find someone to do the install best option is to find a local mechanic to you with a good reputation and let them tackle the
view full answer... - Can the Redarc Tow Pro Elite Be Installed on the 2021 Honda Ridgeline RTL
- I may have a solution for you, but currently there has not been a plug and play harness available to install a brake controller in a 2021 Honda Ridgeline RTL; I do know that the 2021 Pilot and Passport are still using the same brake controller plug in harness in the vehicle, but it has not been confirmed by any of our manufacturers whether or not this is the same on the Ridgeline. The normal plug and play adapter for the 2020 Ridgeline and the 2021 Pilot and Passport is the # RED59FR.
If
view full answer... - Parts Needed to Install Redarc Tow-Pro Elite Controller on a 2017 Subaru Forester
- I can definitely help you get the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR installed on your 2017 Subaru Forester!
It sounds like you already have the 4-Way flat connector, like part # C56040, for the basic trailer lighting on your vehicle so you'll just need to install the Universal Wiring Kit # ETBC7 which gives you all of the wiring and connections you need to have a fully-functional 7-Way for the Tear trailer as well as a 4-Way flat connector for your small trailer.
view full answer... - Recommended Tester for Vehicle 7-Way
- Sounds like you just need a tester for your Jeep's 7-way, and there is one option I recommend above the rest, which is from Pollak:
- Pollak 7-Way to RV Socket LED Circuit Tester # PK12741
I really like this tester because it is so simple to use; you just plug it into your 7-way and its green LEDs will light up if the functions are working properly. The functions are noted on the tester as well so there will be no confusion as to which circuits are functioning correctly and which
view full answer... - Redarc Tow Pro Elite Brake Controller Recommendation for 2019 Toyota Tacoma
- The correct Redarc Tow-Pro Elite Trailer Brake Controller for a 2019 Toyota Tacoma is part # RED44FR. However, you will also need the Custom Wiring Adapter for Trailer Brake Controllers part # 3031-S. The Custom Wiring Adapter for Trailer Brake Controllers simply plugs in under your dash and then the other end with blunt cut wires gets connected to the Redarc Tow-Pro Elite Trailer Brake Controller using the supplied butt connectors. That said, the wires are the same color and there are
view full answer... - Brake Controller with Small Dash Footprint for 2019 Chevy Suburban
- I have a really great brake controller solution for your 2019 Chevy Suburban. I recommend the Redarc Tow Pro Elite # RED44FR because this is a proportional brake controller like you want that senses the amount of braking you are applying and because of how small of a space it takes up on your dash or center console. If you check out the picture I attached you'll the very small knob that this controller needs you to mount. It can go basically anywhere you can reach it as well.
The custom
view full answer... - Parts Needed to Install Redarc Brake Controller in 2022 Toyota 4Runner
- To install either the Redarc brake controller # RED44FR or the # RED24FR the correct install harness is the part # RED49FR. Then you'd also want the knockout plate bracket part # 331-TPSI-002 which is custom fit for your vehicle.
view full answer... - Parts Needed To Install Redarc Tow-Pro Elite RED44FR In 2020 Ford Explorer W/ Factory Tow Package
- Since your 2020 Ford Explorer came with the factory tow package you will need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED87FR which will plug into the factory trailer brake controller port underneath the dash of your vehicle, and will plug into the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR you were looking at.
I included videos of the products mentioned for you to take a look at.
view full answer... - How to Install Brake Controller in 2002 Dodge Durango with 7-Way
- If your 2002 Dodge Durango has the factory installed 7-way trailer connector on the rear bumper, the port for the brake controller should be located near the emergency brake pedal. I am sending a video link of a brake controller installation on a 2003 Dodge Dakota and at the 45 second mark it shows the location of the brake controller port under the dash that should help you locate the port on your vehicle.
If not you can still wire a brake controller to your 7-way but you'll have to
view full answer... - Wiring an Odessey Brake Controller on a 2005 Dodge 2500 with and without a Plug and Play
- If the 7 way connector is factory installed, there should be a plug under the dash to connect the wiring adapter. Behind the emergency brake pedal, there should be a black box on the firewall with a bolt running through the center of it. The connector you are looking for should be located above it. If the 7 way was not factory installed, you will have to hardwire the brake controller. We have an online help page that describes how this is done. You will also need the appropriate installation
view full answer... - Brake Controller Adapter Harness for a 2018 Ram 1500 with Off Brand Brake Controller
- The correct trailer wiring harness adapter for your 2018 Ram 1500 is the Tekonsha Plug-In Wiring Adapter part # 3024-P, not the Tekonsha Custom Wiring Adapter part # 3020-S. If you will be using this wiring harness adapter for a brake controller that does not have a custom wiring harness adapter all you need to do is cut the black plug off of the Tekonsha Plug-In Wiring Adapter part # 3024-P and attach the one from your brake controller using some butt connectors like part # DW05744-5.
view full answer... - Brake Controller Harness That Plugs Into Port Under Dash of 2003 Dodge Ram 1500
- We do offer adapters that will plug right into your 2003 Dodge Ram 1500 for the install of a brake controller. We don't carry the brand of controller you have so what you can use is the part # 3020-S. You'd wire the adapter by color to your controller and then plug the gray end under your dash in the port by the emergency pedal.
I attached a picture of the blue connector you are looking for.
view full answer... - Length of Wiring Harness From Knob of Redarc Tow-Pro Elite Brake Controller
- The length is 3 feet for the wiring harness from the control knob of the Tow-Pro Elite brake controller, which is the following part number:
- Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR
view full answer... - How to Deterine if 2000 Dodge Durango Has Factory Tow Package
- If your vehicle has a factory installed 7 way connector on the rear bumper, then you have the tow package. The spring loaded cover on the 7-way should say Mopar on it. Under the dash, in the driver's side footwell, behind the emergency brake, there should be a black junction box bolted to the firewall. There should be a connector clipped to the top of this box that the # 3020-P brake controller wiring adapter would plug into.
If you do not have the factory 7-way trailer connector at
view full answer... - Does Redarc Tow-Pro Elite For 2004 Dodge Ram With Factory 7-Way Need Added Fuse
- That's a good question, but you will not need any added fuses and what you have with your 2004 Dodge Ram will be sufficient with the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR and Tekonsha Custom Wiring Adapter # 3020-S.
I was able to look up some service manuals, and found that the fuse box in the engine compartment is properly fused for the electric brake provision in your truck.
view full answer... - What are the Brake Controller Wiring Colors and Functions to Install on a 2001 Dodge Ram 3500
- You will not want to hook of the brake controller wires color for color because they will not match up. On a brake controller, white is ground, black is 12 volt power to the controller, blue is output to the trailer brakes, and red is input from the brake switch.
If your 2001 Dodge Ram came with a 4 or 7-Way trailer connector, you can use # 3020-P or # 3020-S. One end plugs into a port on the truck and the other end has blunt cut wires that you would attach to the brake controller color
view full answer... - Can Tekonsha Voyager Brake Controller Wire to 2007 Dodge Ram 2500
- Yes, to install your older Tekonsha Voyager in your 2007 Dodge Ram 1500 the correct install harness is the part # 3020-S. This will plug into the port under the dash on your truck and comes with wires that will get wired by color to the controller you have.
view full answer...
Info for these parts were:
Edited by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Installed by:
Cole B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.