Filter Products
Filter by Size
$329.00 - $329.00
Videos
for Straight Tongue Trailer Coupler
Help Articles
for Straight Tongue Trailer Coupler
Expert Answers
for Straight Tongue Trailer Coupler
The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door…
view full answer...I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern…
view full answer...The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing…
view full answer...Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…
view full answer...Thank you for the image. It appears you will need either the Demco Channel Tongue Trailer Coupler #DM13203-95 or #DM16080-95. Both of these couplers have a zinc coating for increased corrosion resistance and fit on a standard…
view full answer...Yes, I do have the exact dimensions you need of the Demco Channel Tongue Trailer Coupler part #DM15945. I have attached these for you below.
view full answer...I recommend etrailer.com Channel Tongue Coupler part #CT-5003-Z to replace the Shelby 5135 coupler. The etrailer.com coupler has a channel width of 3" and takes a 2" ball. It also has 3"…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x 2-1/2" tall to it's a little smaller than the 3" square shank…
view full answer...Generally speaking bearing grease has so little water in it that significant expansion due to freezing temperatures is unlikely. Higher operating temperatures within the hubs while underway would potentially thin the grease but again not cause much…
view full answer...Yes, the Demco Channel Tongue Trailer Coupler #12564 that you referenced does accept a 2-inch hitch ball and mounts to a 3-inch-wide trailer tongue. It's mounting hole spacing is indeed 3-inches and it offers a 10,000-lb weight…
view full answer...The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…
view full answer...