Filter Products
Filter Results
$8.67 - $17.00
$9.62 - $9.62
$10.78 - $10.78
$6.62 - $6.62
$85.37 - $85.37
Filter by Style of Boat Trailer Part
$8.67 - $17.00
$9.62 - $9.62
$10.78 - $10.78
$6.62 - $6.62
$85.37 - $85.37
Videos
for Boat Trailer Parts
Help Articles
for Boat Trailer Parts
Expert Answers
for Boat Trailer Parts
The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the…
view full answer...I can certainly understand not wanting to have to connect 2 five-foot carpeted bunk rails like #CE27820 to get the 10 foot bunks you need. We don't offer them in the 10' length because the shipping costs would be…
view full answer...Two 12 foot long bunks boards will work well to support your 21 foot boat. Ideally, the bunk boards should be at least half as long as your boat and run from the stern (or a few inches beyond it) to the bow as far forward as you like. Due to…
view full answer...Oddly enough I can't find a decent u-bolt that we carry that would work well for your application.
view full answer...Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 can work on the inside of a pontoon boat. Based on the photo you may prefer the CE Smith 90-Degree Bunk Board Guide-On Kit #CE27600K90 which will…
view full answer...I have a solution for you but the part #CE10190GA-4 is not available in a half kit so what you would want is the part #CE10190GA with the swivel bracket part #CE10206G. We don't have the bolt and nut though so you would need to…
view full answer...For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part #CE10305G and the…
view full answer...The CE Smith Bolster and Swivel Bracket Assemblies part #CE10000G-4 do not have a specified weight capacity as it can vary by the strength of the u-bolts used in conjunctions with these brackets as well as how many brackets are used per board. I…
view full answer...Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…
view full answer...I do have a photo of the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System part #AR84FR installed which you can see below. This should give you a better idea of what is involved but it's not complicated at all. These work really…
view full answer...The Malone MicroSport Trailer #MPG460G uses crossbars like what you would find on the roof of a vehicle instead of bunk boards. This is sold on our site as the Malone Crossbar Conversion Kit #MPG475 and it comes with the mounting hardware. If you…
view full answer...Yes, you could convert your Rolco trailer from the wooden bunks to roller bunks. The Boat Trailer Deluxe Roller Bunk, part #DL21741, has a universal mount system that attaches directly to either vertical or horizontal positioned bunk boards that…
view full answer...