Yes, the Draw-Tite Sportframe Trailer Hitch, # 24865, and the Tow Ready, the T-One Vehicle Wiring Harness, # 118422, will fit all styles of the 2011 Ford Fusion, including the hybrid model. We have a video of this hitch being installed on a 2011 For Fusion Hybrid and a video of the wiring harness being installed on a 2010 Fusion which should be very similar to your 2011 model.
The ball mount is separate, you will need the Draw-Tite Ball Mount, # 3594, which includes a pin and clip. A properly... view full answer...
Yes! The Blue Ox Base Plate Kit # BX2646 has been confirmed to fit your 2014 Ford Fusion Energi Hybrid. We confirmed this with Blue Ox.
Attached are the installation instructions for you to reference. view full answer...
When we installed Curt 1-1/4-inch Class II hitch # C12091 on a 2014 Ford Fusion we found that the hitch pin hole was 5-3/4-inches forward of the rear edge of the bumper cover. This is shown in the linked video at the 1:30 mark. This means a hitch bike rack would ideally provide at least 7-inches of clearance to avoid vehicle contact.
The Thule Hitching Post Pro 4-bike carrier # TH934XTR will provide plenty of clearance to avoid contact with the car while you drive. This rack offers excellent... view full answer...
The Curt Universal Tail Light Wiring Kit # C63CR you were looking at is confirmed to fit your 2017 Ford Fusion Hybrid and would be a great option to power your lights while flat towing it.
We have not had a chance to install this specific harness on a Fusion yet but I included the installation video on a 2017 Ford Focus for you to take a look at.
You will still need a tow bar, base plate kit, safety cables, and a supplemental braking system. If you do not have these let me know and I... view full answer...
It sounds as if you are wanting to move your hitch from your 2010 Ford Fusion to your 2011 Ford Fusion Hybrid. We have three hitches that will fit both your 2010 Ford Fusion and 2011 Ford Fusion Hybrid.
The choices are Draw-Tite # 24865 and Curt # C11390. The hitch that you referenced will not fit either your 2010 or 2011 Fusion. It was designed to fit the 2013-2014 Ford Fusion.
If you are moving a hitch from one Fusion to the other, it is recommended that you use new hardware on your... view full answer...
Yes, I checked with Draw-Tite and the Hitch part # 24897 that you referenced is confirmed to fit all models of the 2015 Ford Fusion so it should work well on your model with dual exhaust.
A popular bike rack with other owners of Fusions is the Swagman XTC2 bike rack part # S64670. This rack has been reviewed very well by our customers. Check out the review video I attached. view full answer...
In most cases 4.80-12 tires that are on wheels with 5 bolts they have a 5 on 4-1/2" bolt pattern. If you measure from the center of one hole to the hole right next to it you should get 2-5/8" if your bolt pattern is 5 on 4-1/2". I have attached an article for your reference and the link to all of the 4.80-12 tires available on a 5 on 4-1/2" bolt wheel.
If your wheel has a 4 on 4" bolt pattern it will have 4 bolts which is another common wheel for the 4.8x12 tires. view full answer...
I spoke with the engineers over at Timbren. The reason that they do not recommend the axle-less suspension systems, such as # ASR5200S01, for triple axle applications is because there is no equalization between what would be the axles of the trailer. Without that a trailer that is not fully level would put to much stress and/or weight on the other sets.
The engineer said that they have done it before and it can be done but unless the trailer is always fully level, when loaded or not, it... view full answer...
Yes the black Husky Liners WeatherTech Custom-Fit Cargo Liners for your trunk # WT40959 that you referenced is confirmed as a custom fit for your 2014 Ford Fusion Hybrid model.
For your reference, I have also included a link to the other trunk and floor mats that are confirmed to fit for your vehicle. view full answer...
The Curt Class II receiver you referred to, part # C12091 is indeed compatible with the Hybrid model of the 2014 Ford Fusion. The # C12091 would be an excellent choice.
The hitch would make a fine attachment point for a bike rack or other hitch mounted accessory, but keep in mind that Ford does not recommend towing with the Fusion Hybrid. view full answer...
To flat tow your 2019 Ford Fusion Energi behind your 2020 Coachmen Leprechaun 319MB you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you listed below:
Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bars # RM-522. This tow bar features a non-binding design and large hookup radius to make connecting and disconnecting from your base plates on any terrain a breeze. This tow bar also easily folds up to... view full answer...
I can absolutely confirm for you that the EcoHitch Hidden Trailer Hitch Receiver # 306-X7239 will fit your 2019 Ford Fusion Titanium.
This has a 2 inch receiver like you are needing and the receiver is the only part showing so your Fusion will maintain its aesthetic.
I can't tell you why others are not selling this other than they may not have it available, but it will fit, as you can see from the accompanying photo of a Ford Fusion Titanium with the EcoHitch Hidden Trailer Hitch Receiver... view full answer...
As far as the fitment of the Thule Vector M # TH613201 fitting on your Thule WingBar Evo - 53" Crossbars # TH711420, the Vector M will attach to the WingBar Evo crossbars. In addition, you do have enough room on the top of your roof to accommodate the required crossbar spread of the Vector M (21-7/8 inches - 36-3/4 inches).
For the rear hatch clearance on your 2019 Ford Fusion, there needs to be at least 29 inches from the from the center of your front crossbar to the line where the roof... view full answer...
The correct Blue Ox base plate kit that you need for your 2017 Ford Fusion Hybrid is the Blue Ox Base Plate Kit part # BLU44FR which is a direct fit. If you need a tow bar that is compatible with this base plate kit then I recommend the Blue Ox Alpha Tow Bar part # BX7380 because it has a triple lug connection for security and a self-aligning design for ease of use.
I have attached a photo of what the base plate kit will look like once installed. In addition to the above base plate kit... view full answer...
The Curt Trailer Hitch Receiver part # C12091 is a confirmed fit for your 2015 Ford Fusion and will work well for you. It is a Class II hitch with a 1-1/4" receiver tube opening. It is also very easy to install as you can see in the attached video.
In regards to the Curt 2 Bike Platform Rack part # C18085, you will have no problems using this bike rack with the Curt hitch on your Fusion. However, you will not be able to fold the rack up for storage (see photo) as there will not be sufficient... view full answer...
The inverter in the Go Power Solar Extreme Charging System - 570 Watt Solar Panels - 3,000 Watt Inverter Charger # 34282185 would not be able to run at the same time to supplement the shore power. The only way for it would be to separate it from your RV's electrical system and wire the second air conditioner directly to the inverter and run both systems independently.
The more cost effective and easier option would be to use a generator like the etrailer 4,500-Watt Portable RV Generator... view full answer...
The Ford LED Lighted Vehicle Emblem - Black part # RP86620 will fit your 2018 Ford Fusion Hybrid if you have a space for it. The emblem measures 9" wide x 3-1/2" tall and simply sticks to your vehicle with heavy-duty tape so you can mount it almost anywhere. A lot of customers stick it to the grill of their vehicle. It will need to be wired to the fusions tail lights. view full answer...
The # C56351 Curt T-Connector Vehicle Wiring harness is a confirmed fit for all models of the 2017 Ford Fusion. This means it will work with your 2017 Ford Fusion Sport.
However, I recommend the # 118574 Tekonsha T-One Vehicle Wiring Harness. This is also a confirmed fit for your Fusion Sport. The reason I recommend this wiring harness over the other is because we have found it to be the most reliable.
I have attached an installation video on a 2017 Ford Fusion for your reference. view full answer...
The answer to this question is yes you can, so long as you have the Thule WingBar Evo roof rack (and not the AeroBlade), and you are transferring it from a 2017 Honda CR-V with a naked roof to an '18 Fusion with a naked roof. The reason you would have to have the WingBar Evo is because Thule changed their roof rack style from the AeroBlade, and no longer makes parts for the AeroBlade roof racks.
So, that said, if you do have the WingBar on a '17 CR-V with a naked roof you would have the... view full answer...
Go To Results