Does the Curt T-Connector Vehicle Wiring Harness Work With 2017 Ford Fusion Sport

Question

Question:

Will this fit the 2017 Ford Fusion Sport?

asked by: Correy A

0

Expert Reply:

The # C56351 Curt T-Connector Vehicle Wiring harness is a confirmed fit for all models of the 2017 Ford Fusion. This means it will work with your 2017 Ford Fusion Sport.

However, I recommend the # 118574 Tekonsha T-One Vehicle Wiring Harness. This is also a confirmed fit for your Fusion Sport. The reason I recommend this wiring harness over the other is because we have found it to be the most reliable.

I have attached an installation video on a 2017 Ford Fusion for your reference.

expert reply by: Robin H

0

Answer 1

In regards to the Curt T-Connector Vehicle Wiring Harness part #C56351 which is a fit for your 2016 Ford Fusion, I would first check to make sure you have the wire leads ran to the proper sides of the vehicle. The lead with green wire goes to the…

view full answer...

Answer 2

I recommend Curt Trailer Hitch Receiver part #C12164 which is a confirmed fit for the 2020 Ford Fusion Sport. It is a concealed cross tube so the only portion of the hitch that is visible once installed is the receiver portion for a nice clean…

view full answer...

Answer 3

For the Sport model of the 2017 Ford Fusion you will actually need hitch #C12164. The recommended ball mount for this hitch is #C45016. For a 1-7/8 inch ball use #19257 and for a 2 inch ball use #19258. And for trailer wiring you can use #118574 to…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...