Will Trailer Hitch Fit Both 2010 Ford Fusion and 2011 Ford Fusion Hybrid
Question:
Will a Reece hitch from a 2010 ford fusion fit on a 2011 ford fusion hybrid
asked by: Penny
Expert Reply:
It sounds as if you are wanting to move your hitch from your 2010 Ford Fusion to your 2011 Ford Fusion Hybrid. We have three hitches that will fit both your 2010 Ford Fusion and 2011 Ford Fusion Hybrid.
The choices are Draw-Tite # 24865 and Curt # C11390. The hitch that you referenced will not fit either your 2010 or 2011 Fusion. It was designed to fit the 2013-2014 Ford Fusion.
If you are moving a hitch from one Fusion to the other, it is recommended that you use new hardware on your new installation because it is considered torque to yield and the hardware should only be torqued once. The replacement hardware to use is # RHK.
All of these trailer hitches have a Class I rating and a 1-1/4 inch receiver opening.
If you are planning on carrying bikes, please be advised that your vehicle has a two bike limit. If you are planning on using a hitch mounted cargo carrier then your total allowable weight has a 200 lb maximum which includes the weight of the carrier. Finally, if you are planning on pulling a small trailer, you have a 200 lb tongue weight maximum capacity.
If you would like any recommendations for bike racks, cargo carriers or trailer accessories, please let me know and I would be happy to help.
I have attached the product pages for the three hitches that will fit both model vehicles as well as the installation instructions. I have also attached a FAQ article covering trailer hitch classes.
Products Referenced in This Question
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Difference Between Class I and Class II Hitches that Fit 2020 Ford Fusion
- Q&A: Ground Clearance After Installing a Hitch on a 2014 Ford Fusion
- Q&A: What are the Trailer Towing Capacities for a 2014 Ford Fusion
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How To Carry a Spare Tire on a Little Guy Trailer
- Q&A: Will Draw-Tite Trailer Hitch Fit 2020 Ford Fusion SE with Dual Exhaust
- Article: Flat Towing Package for 2015-2018 Ford F-150
- Q&A: What is the Height With and Without Rise on Ball Mount for 2016 Ford Fusion
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Hitch Fit for 2015 Ford Fusion Energi
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How Much Does a Boat and Trailer Weigh?